HP

HP Management Agents for Servers (Server component)

English
  Server Subsystem  |  Management Processor   

Management Processor
»Table of Contents
»Index
»Server Subsystem
»System
»Storage
»Utilization
»Power Subsystem
»Recovery
Management Processor
»Tasks
»Logs
»Printable version
»Glossary
»Using Help
» Remote Insight
» Remote Insight NIC

Remote Insight

  • Model displays the edition of the Remote Insight in the server

    OID: 1.3.6.1.4.1.232.9.2.2.21 - cpqSm2CntlrModel

  • Hardware Version displays the Hardware revision of Remote Insight model on the server

    OID: 1.3.6.1.4.1.232.9.2.2.28 - cpqSm2CntlrHardwareVer

  • Serial Number displays the Remote Insight serial number

    OID: 1.3.6.1.4.1.232.9.2.2.15 - cpqSm2CntlrBoardSerialNumber

  • ROM Version displays the Remote Insight firmware version and date

    OID: 1.3.6.1.4.1.232.9.2.2.2 - cpqSm2CntlrRomRevision

  • iLO Security Override Switch displays the Integrated Lights Out Edition security state. The iLO Security Override Switch field is supported only in case of Integrated Lights Out Edition models

    OID: 1.3.6.1.4.1.232.9.2.2.27 - cpqSm2CntlriLOSecurityOverrideSwitchState

  • Mouse displays whether the mouse is connected to Remote Insight Board. The Mouse filed is not supported for Remote Insight Lights-Out models

    OID: 1.3.6.1.4.1.232.9.2.2.23 - cpqSm2CntlrMouseCableStatus

  • Keyboard displays whether the keyboard is connected to Remote Insight Board. The Keyboard filed will not be displayed for Remote Insight Lights-Out models

    OID: 1.3.6.1.4.1.232.9.2.2.19 - cpqSm2CntlrMouseCableStatusOB

  • Interface Status displays the Remote Insight interface status

    OID: 1.3.6.1.4.1.232.9.2.2.17 - cpqSm2CntlrKeyboardCableStatusOB

Alarm

If your system supports Remote Insight Lights-Out Edition, the following alerts are available:

  • Status indicates if alerts are enabled at the Remote Insight. This is a global flag and governs all users. If alerts are disabled, alarms will not be sent.

    OID: 1.3.6.1.4.1.232.9.2.2.7 - cpqSm2CntlrAlertStatus

  • Pending Alarm displays if the alert is unable to determine the state of the Remote Insight, or if all alerts have been delivered or if there are alerts pending that still need to be sent.

    OID: 1.3.6.1.4.1.232.9.2.2.8 - cpqSm2CntlrPendingAlerts

If your system supports the Integrated Lights Out Edition, the following alerts are available:

  • Remote Insight Alerts allow users to enable or disable the alerts by clicking on the button provided.

    OID: 1.3.6.1.4.1.232.9.2.2.29 - cpqSm2CntlrAction

  • Host Alerts allow users to enable or disable the alerts by clicking on the button provided.

    OID: 1.3.6.1.4.1.232.9.2.2.29 - cpqSm2CntlrAction

  NOTE:

Pending Alarm displays if the alert is unable to determine the state of the Remote Insight, or if all alerts have been delivered or if there are alerts pending that still need to be sent

Battery

  • Battery Status indicates the status of the Remote Insight board battery. When the Remote Insight board battery is enabled and there is a host power failure, the Remote Insight board battery provides a minimum of 30 minutes of operation. This enables the Remote Insight board to send alerts to the users that were specified during configuration.

    OID: 1.3.6.1.4.1.232.9.2.2.4 - cpqSm2CntlrBatteryEnabled

  • Battery Condition displays the condition of the battery. The following values are possible.

    • OK - The battery is charged and functional.

    • Failed - The battery needs to be replaced.

    • Disconnected - The battery has been disconnected.

    OID: 1.3.6.1.4.1.232.9.2.2.5 - cpqSm2CntlrBatteryStatus

  • Battery Charge displays the percentage of the charge in the Remote Insight board battery.

    OID: 1.3.6.1.4.1.232.9.2.2.6 - cpqSm2CntlrBatteryPercentCharged

Power

  • Auxiliary Power displays whether or not the auxiliary power (External Power Cable and/or Internal Power Cable, which is a 30-pin cable or a 16-pin cable) is connected to the Remote Insight.

    OID: 1.3.6.1.4.1.232.9.2.2.25 - cpqSm2CntlrExternalPowerCableStatus

  • Virtual Power Button displays whether or not the virtual power button cable is connected to the Remote Insight.

    OID: 1.3.6.1.4.1.232.9.2.2.24 - cpqSm2CntlrVirtualPowerCableStatus

  NOTE:

The Power section is not supported for Integrated Lights Out Edition

Modem/COM Port Settings

  NOTE:

The Modem/COM Port Settings is not supported for Integrated Lights Out Edition or Remote Insight Lights-Out Edition.

A series of tables is displayed providing information about any Remote Insight Board modems or communication ports. The first table title will indicate the type of device described like Internal Modem, External Port, External Modem, External Direct Connect or External XonXoff (OID: 1.3.6.1.4.1.232.9.2.4.1.1.2 - cpqSm2CommType). The tables may contain the following:

  • Model displays the model of the communication device.

    OID: 1.3.6.1.4.1.232.9.2.4.1.1.20 - cpqSm2CommPcmciaModel

  • Data Settings this table contains the data settings for the communication device including:

    • Alarms displays if the Remote Insight firmware will use this communication device to deliver traps.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.14 - cpqSm2CommSnmpTrapDelivery

    • Non-PPP displays if non-PPP connections are allowed on this port.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.13 - cpqSm2CommNonPppConnections

    • Baud Rate displays the baud rate to be used on this port.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.3 - cpqSm2CommBaudRate

    • Data Bits displays the number of data bits to be used on this port.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.5 - cpqSm2CommDataBits

    • Stop Bits displays the number of stop bits to be used on this port.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.6 - cpqSm2CommStopBits

    • Parity displays the type of parity to be used on this port.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.4 - cpqSm2CommParity

    • Pager Settings displays pager settings for the communication device.

    • Alarms displays if the Remote Insight Board firmware will use this port to deliver pages.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.15 - cpqSm2CommPageDelivery

    • Message displays the message that will be in the body of the page.

      OID: 1.3.6.1.4.1.232.9.2.2.18 - cpqSm2CntlrSystemId

    • Baud Rate displays the baud rate to use for pager messages.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.16 - cpqSm2CommPagerBaudRate

    • Data Bits displays the number of data bits to user for pager messages.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.18 - cpqSm2CommPagerDataBits

    • Stop Bits displays the number of stop bits to use for pager messages.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.19 - cpqSm2CommPagerStopBits

    • Parity displays the type of parity to user for pager messages.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.17 - cpqSm2CommPagerParity

  • Modem Control Strings This table contains the modem control strings for the communication device including:

    • Reset displays the string used to reset the modem.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.7 - cpqSm2CommModemReset

    • Initialize displays the string used to initialize the modem.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.8 - cpqSm2CommModemInit

    • Dial Prefix displays the string pre-pended to phone numbers before dialing.

      OID: 1.3.6.1.4.1.232.9.2.4.1.1.9 - cpqSm2CommModemDialPrefix

Self Test Results

The Self Test Results section indicates various error-status depending on the Remote Insight model. The following is the list of error-status fields:

  • Busmaster I/O Reads

  • Memory

  • Internal Modem Firmware

  • Internal Modem

  • External Port

  • Keyboard Interface

  • Battery Interface

  • NVRAM Interface

  • NVRAM Write/Read/Verify

  • Video SideCard

  • PCMCIA

  • NIC

  • Mouse

  • CPLD

  • SRAM

  • EEPROM

  • I2C

OID: 1.3.6.1.4.1.232.9.2.2.22 - cpqSm2CntlrSelfTestErrorMask

Reset Remote Insight Board

The [Reset Remote Insight] button is used to Reset the Remote Insight Board. Once the Remote Insight is reset, The HP Insight Management Agent will take minimum two minutes to reconnect with the Remote Insight depending upon the poll interval.

  NOTE:

If the [Reset] button is displayed then this feature is supported by the HP Insight Management Agent for this particular Remote Insight model.

Remote Insight NIC

The NIC section displays the following information about the NIC in the Remote Insight Board. Not all fields are supported by all models of Remote Insight Board and/or NIC.

  • Model displays the NIC model.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.2 - cpqSm2NicModel

  • DNS Name displays the fully qualified DNS name assigned to this Remote Insight Board.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.14 - cpqSm2NicRibFullQualDnsName

  • Type displays if the NIC is embedded or pcmcia and whether it is ethernet or token ring.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.3 - cpqSm2NicType

  • IP Address displays the IP address for this NIC.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.5 - cpqSm2NicIpAddress

  • Subnet Mask displays the subnet mask for this NIC.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.6 - cpqSm2NicIpSubnetMask

  • Gateway displays the default gateway configured for this NIC.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.13 - cpqSm2NicGatewayIpAddress

  • Status displays if this NIC is enabled or disabled.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.7 - cpqSm2NicEnabledStatus

  • Physical Address displays the MAC address for this NIC.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.4 - cpqSm2NicMacAddress

  • Duplex displays if the controller is in half duplex, full duplex or does not support a duplex state.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.8 - cpqSm2NicDuplexState

  • Speed displays the speed of the NIC.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.9 - cpqSm2NicSpeed

  • Max Packet Size displays the maximum packet size of the NIC.

    OID: 1.3.6.1.4.1.232.9.2.5.1.1.12 - cpqSm2NicMtu

  • Transmit/Receive Statistics displays the following set of statistics for the NIC:

    • Bytes displays the number of bytes transmitted/received.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.9 - cpqSm2NicRecvBytes

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.2 - cpqSm2NicXmitBytes

    • Total Packets displays the number of packets transmitted/received.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.10 - cpqSm2NicRecvTotalPackets

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.3 - cpqSm2NicXmitTotalPackets

    • Unicast Packets displays the number of unicast packets transmitted/received.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.11 - cpqSm2NicRecvUnicastPackets

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.4 - cpqSm2NicXmitUnicastPackets

    • Non-Unicast Packets displays the number of non-unicast packets transmitted/received.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.12 - cpqSm2NicRecvNonUniPackets

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.5 - cpqSm2NicXmitNonUniPackets

    • Discarded Packets displays the number of packets discarded during transmit/receive.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.13 - cpqSm2NicRecvDiscardPackets

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.6 - cpqSm2NicXmitDiscardPackets

    • Error Packets displays the number of error packets found during transmit/receive.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.14 - cpqSm2NicRecvErrorPackets

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.7 - cpqSm2NicXmitErrorPackets

    • Unknown Protocols displays the number of unknown protocol packets received.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.15 - cpqSm2NicRecvUnknownPackets

    • Queue Length displays the number of outstanding packets in the transmit queue.

      OID: 1.3.6.1.4.1.232.9.2.5.2.1.8 - cpqSm2NicXmitQueueLength
© 2004 Hewlett-Packard Development Company, L.P.