<?xml version="1.0" encoding="UTF-8"?>
<cpq_package version="2.0.1.0">
  <filename>CP029380.zip</filename>
  <divisions>
    <division key="9">
      <division_xlate lang="en">Storage</division_xlate>
      <division_xlate lang="ja">ストレージ</division_xlate>
    </division>
  </divisions>
  <operating_systems>
    <operating_system key="">
      <operating_system_xlate>VMware ESXi 5.0</operating_system_xlate>
    </operating_system>
    <operating_system key="">
      <operating_system_xlate>VMware vSphere 5.1</operating_system_xlate>
    </operating_system>
    <operating_system key="">
      <operating_system_xlate>VMware vSphere 5.5</operating_system_xlate>
    </operating_system>
    <operating_system key="">
      <operating_system_xlate>VMware vSphere 6.0</operating_system_xlate>
    </operating_system>
  </operating_systems>
  <products/>
  <category key="2900260">
    <category_xlate lang="en">Firmware - SAS Storage Disk</category_xlate>
    <category_xlate lang="ja">ファームウェア - SASストレージ ディスク</category_xlate>
  </category>
  <id product="9dafb2a29866424b8a6ff46eb2f9a8e1" version="94ac67b8ec384ba2ab9e35e43033d95c"/>
  <name>
    <name_xlate lang="en">Online ROM Flash Component for VMware ESXi  - MM1000FECVH Drives</name_xlate>
    <name_xlate lang="de">Online ROM Flash Component for VMware ESXi  - MM1000FECVH Drives</name_xlate>
    <name_xlate lang="es">Online ROM Flash Component for VMware ESXi  - MM1000FECVH Drives</name_xlate>
    <name_xlate lang="fr">Online ROM Flash Component for VMware ESXi  - MM1000FECVH Drives</name_xlate>
    <name_xlate lang="it">Online ROM Flash Component for VMware ESXi  - MM1000FECVH Drives</name_xlate>
    <name_xlate lang="ja">オンラインROMフラッシュコンポーネント for VMware ESXi - MM1000FECVHドライブ</name_xlate>
  </name>
  <alt_name>
    <alt_name_xlate lang="en">MM1000FECVH Drives</alt_name_xlate>
    <alt_name_xlate lang="de">MM1000FECVH Drives</alt_name_xlate>
    <alt_name_xlate lang="es">MM1000FECVH Drives</alt_name_xlate>
    <alt_name_xlate lang="fr">MM1000FECVH Drives</alt_name_xlate>
    <alt_name_xlate lang="it">MM1000FECVH Drives</alt_name_xlate>
    <alt_name_xlate lang="ja">MM1000FECVHドライブ</alt_name_xlate>
  </alt_name>
  <version value="HPD2" revision="B" type_of_change="1"/>
  <manufacturer_name>
    <manufacturer_name_xlate lang="en">Hewlett Packard Enterprise</manufacturer_name_xlate>
    <manufacturer_name_xlate lang="ja">Hewlett Packard Enterprise</manufacturer_name_xlate>
  </manufacturer_name>
  <languages langlist="en, ja, de, fr, it, es">
    <languages_xlate lang="en">English (US), Japanese, German, French, Italian, Spanish</languages_xlate>
    <languages_xlate lang="fr">Anglais, Japonais, Allemand, Français, Italien, Espagnol</languages_xlate>
    <languages_xlate lang="de">Englisch, Japanisch, Deutsch, Französisch, Italienisch, Spanisch</languages_xlate>
    <languages_xlate lang="it">Inglese, Giapponese, Tedesco, Francese, Italiano, Spagnolo</languages_xlate>
    <languages_xlate lang="ja">英語（US）, 日本語, ドイツ語, フランス語, イタリア語, スペイン語</languages_xlate>
    <languages_xlate lang="es">Inglés, Japonés, Alemán, Francés, Italiano, Español</languages_xlate>
  </languages>
  <release_date year="2016" month="3" day="3" hour="15" minute="37" second="8"/>
  <description>
    <description_xlate lang="en">
<![CDATA[This Smart Component provides firmware for the following drive models: MM1000FECVH]]>
</description_xlate>
    <description_xlate lang="de">
<![CDATA[This Smart Component provides firmware for the following drive models: MM1000FECVH]]>
</description_xlate>
    <description_xlate lang="es">
<![CDATA[This Smart Component provides firmware for the following drive models: MM1000FECVH]]>
</description_xlate>
    <description_xlate lang="fr">
<![CDATA[This Smart Component provides firmware for the following drive models: MM1000FECVH]]>
</description_xlate>
    <description_xlate lang="it">
<![CDATA[This Smart Component provides firmware for the following drive models: MM1000FECVH]]>
</description_xlate>
    <description_xlate lang="ja">
<![CDATA[このSmartコンポーネントは、次のドライブモデルのファームウェアを提供します。 MM1000FECVH]]>
</description_xlate>
  </description>
  <prerequisite_notes/>
  <installation_notes>
    <installation_notes_xlate lang="en">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="de">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="es">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="fr">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="it">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
    <installation_notes_xlate lang="ja">
      <installation_notes_xlate_part>
<![CDATA[<p><strong>To use HP Smart Update Manager from the HPE Service Pack for ProLiant:<br />
<br />
&nbsp;&nbsp;&nbsp;&nbsp; Offline (</strong>The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components<strong>):</strong></p>

<ul>
	<li>Place the <a href="https://www.hpe.com/servers/spp/download">HPE Service Pack for ProLiant</a> on a USB key using the <a href="https://www.hp.com/swpublishing/MTX-357c87ee9b054ad7a631d9eaba">HPE USB Key Creator Utility</a>.</li>
	<li>Place the desired Linux firmware component to be updated in the directory, /hp/swpackages on the USB key.</li>
	<li>Boot from the newly created HPE Service Pack for ProLiant USB key.</li>
	<li>Follow HP Smart Update Manager steps to complete firmware update.</li>
</ul>

<p><strong>&nbsp;&nbsp;&nbsp;&nbsp; Remote Online:</strong></p>

<ul>
	<li>Download the appropriate SPP.</li>
	<li>Add the component to the SPP.</li>
	<li>Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.</li>
	<li>Run HP SUM.</li>
	<li>Add the ESXi host to be updated as a remote target/node.</li>
	<li>Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).</li>
	<li><strong>For HP SUM 6.0 and newer</strong>, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.</li>
	<li>Follow HP Smart Update Manager Steps and complete the firmware update.</li>
</ul>

<p>Refer to the SPP documentation for detailed instructions at: <a href="https://www.hpe.com/servers/spp">https://www.hpe.com/servers/spp</a><br />
&nbsp;<br />
<strong>To use HP Insight Control for vCenter :</strong></p>

<ul>
	<li>Log in to the vSphere Client.</li>
	<li>Select a server or cluster in the inventory tree.</li>
	<li>Click the HP Insight Management tab.</li>
	<li>Follow Insight Control for vCenter steps to update firmware using a Smart Component</li>
</ul>

<p><strong>To update firmware from VMware ESXi operating system on target server:</strong></p>

<ul>
	<li>Enable Tech Support Mode on the ESXi host.</li>
	<li>Login as root. (You must be root in order to apply the update.)</li>
	<li>Place the Smart Component zip file in a temporary directory.</li>
	<li>Unzip the file CPXXXXXX.zip</li>
	<li>Ensure that CPXXXXXX.vmexe is executable by using the command:</li>
</ul>

<p style="margin-left:60.0pt">chmod +x CPXXXXXX.vmexe&nbsp;&nbsp;&nbsp;&nbsp;</p>

<ul>
	<li>From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe</li>
	<li>Follow the directions given by the Smart Component.</li>
	<li>Logout</li>
	<li>Disable Tech Support Mode on the ESXi host.</li>
</ul>

<p>Reboot your system, if required, for the firmware update to take effect.</p>
]]>
</installation_notes_xlate_part>
    </installation_notes_xlate>
  </installation_notes>
  <availability_notes/>
  <documentation_notes>
    <documentation_notes_xlate lang="en">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Online ROM Flash Component for VMware ESXi - MM1000FECVH Drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD1<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>

<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="de">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Online ROM Flash Component for VMware ESXi - MM1000FECVH Drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD1<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>

<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="es">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Online ROM Flash Component for VMware ESXi - MM1000FECVH Drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD1<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>

<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="fr">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Online ROM Flash Component for VMware ESXi - MM1000FECVH Drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD1<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>

<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="it">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Online ROM Flash Component for VMware ESXi - MM1000FECVH Drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD1<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>

<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
    <documentation_notes_xlate lang="ja">
      <documentation_notes_xlate_part>
<![CDATA[<p><strong>Deliverable Name:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Online ROM Flash Component for VMware ESXi - MM1000FECVH Drives<br />
<br />
<strong>Release Version and/or Date:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Last Recommended or Critical Version:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD2<br />
<br />
<strong>Previous Version of Firmware:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; HPD1<br />
<br />
<strong>Firmware Dependency:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>

<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>

<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>

<p><strong>Known Issues:</strong><br />
&nbsp;&nbsp;&nbsp;&nbsp; None</p>
]]>
</documentation_notes_xlate_part>
    </documentation_notes_xlate>
  </documentation_notes>
  <revision_history>
    <revision>
      <version value="HPD2" revision="B" type_of_change="1"/>
      <revision_enhancements_xlate lang="en">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="de">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="es">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="fr">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="it">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="ja">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>改善点/新しい機能：</strong></p>

<ul>
	<li>消費電力を低減するサーボの改善を追加しました。</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>

<p><strong>Problems Fixed for HPD2 (B):</strong></p>

<ul>
	<li>Component would fail to install drive firmware for drives present in a system configured with two or more external drive enclosures attached to an HP Host Bus Adapter H22x. The following message would be reported in the component log file - &ldquo;Device appears more than once in tree&rdquo;. The drive firmware installation failure was not observed in configurations having only one external drive enclosure attached to an HP Host Bus Adapter H22x.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
    <revision>
      <version value="HPD2" revision="" type_of_change="1"/>
      <revision_enhancements_xlate lang="en">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="de">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="es">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="fr">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="it">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>Enhancements/New Features:</strong></p>

<ul>
	<li>Added servo improvements which reduce power consumption.</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_enhancements_xlate lang="ja">
        <revision_enhancements_xlate_part>
<![CDATA[<p><strong>改善点/新しい機能：</strong></p>

<ul>
	<li>消費電力を低減するサーボの改善を追加しました。</li>
</ul>
]]>
</revision_enhancements_xlate_part>
      </revision_enhancements_xlate>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>Drive self-test did not complete within the specified time.</li>
	<li>During a fully cached workload, SMART would report incorrect temperature values.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>修正された問題点：</strong></p>

<ul>
	<li>ドライブセルフテストが指定された時間内に完了しませんでした。</li>
	<li>完全にキャッシュされたワークロード時に、SMARTが誤った温度値を報告します。</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
    <revision>
      <version value="HPD1" revision="" type_of_change="1"/>
      <revision_fixes_xlate lang="en">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>This firmware resolved a potential multiport system failover condition where the drive might not be recognized, due to the drive responding too slowly to a link reset on port A if port B was unavailable.&nbsp; This firmware also fixed possible aborted command errors due to incorrect overlapped command tag checking being performed.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="de">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>This firmware resolved a potential multiport system failover condition where the drive might not be recognized, due to the drive responding too slowly to a link reset on port A if port B was unavailable.&nbsp; This firmware also fixed possible aborted command errors due to incorrect overlapped command tag checking being performed.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="es">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>This firmware resolved a potential multiport system failover condition where the drive might not be recognized, due to the drive responding too slowly to a link reset on port A if port B was unavailable.&nbsp; This firmware also fixed possible aborted command errors due to incorrect overlapped command tag checking being performed.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="fr">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>This firmware resolved a potential multiport system failover condition where the drive might not be recognized, due to the drive responding too slowly to a link reset on port A if port B was unavailable.&nbsp; This firmware also fixed possible aborted command errors due to incorrect overlapped command tag checking being performed.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="it">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>Problems Fixed:</strong></p>

<ul>
	<li>This firmware resolved a potential multiport system failover condition where the drive might not be recognized, due to the drive responding too slowly to a link reset on port A if port B was unavailable.&nbsp; This firmware also fixed possible aborted command errors due to incorrect overlapped command tag checking being performed.</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
      <revision_fixes_xlate lang="ja">
        <revision_fixes_xlate_part>
<![CDATA[<p><strong>修正された問題点：</strong></p>

<ul>
	<li>ポートBが利用できなかった場合にポートA上のリンクリセットにドライブの応答が遅すぎるため、ドライブが認識されないことがある、潜在的な複数ポートシステムのフェイルオーバー状態をこのファームウェアは解決しました。 このファームウェアは、正しくないオーバーラップしたコマンドタグチェックが実行されることにより起こりえる中断されたコマンドエラーも修正しました。</li>
</ul>
]]>
</revision_fixes_xlate_part>
      </revision_fixes_xlate>
    </revision>
  </revision_history>
  <sw_keys>
    <sw_keys_and>
      <sw_key name="MM1000FECVH">
        <sw_key_expectedpath>firmware:sd:SAS</sw_key_expectedpath>
      </sw_key>
    </sw_keys_and>
  </sw_keys>
  <prerequisites>
    <supported_operating_systems>
      <supported_operating_system platform="vmware_esx_server" major="5" minor="5" sr="OEM" name="VMware vSphere 5.5"/>
      <supported_operating_system platform="vmware_esx_server" major="5" minor="0" sr="OEM" name="VMware ESXi 5.0"/>
      <supported_operating_system platform="vmware_esx_server" major="6" minor="0" sr="OEM" name="VMware vSphere 6.0"/>
      <supported_operating_system platform="vmware_esx_server" major="5" minor="1" sr="OEM" name="VMware vSphere 5.1"/>
    </supported_operating_systems>
    <supported_devices>
      <supported_devices_and>
        <supported_device type="sas">
          <supported_device_data name="id">MM1000FECVH</supported_device_data>
        </supported_device>
      </supported_devices_and>
    </supported_devices>
    <required_diskspace size_kb="6000"/>
  </prerequisites>
  <installation>
    <install>
      <install_caps silent="yes" needuseracct="no"/>
      <command>CP029380.scexe</command>
      <command_params></command_params>
      <reboot_required value="no"/>
      <reboot_details value="Environment Dependent">
        <reboot_details_xlate lang="en">Reboot may be required after installation for updates to take effect and hardware stability to be maintained.</reboot_details_xlate>
        <reboot_details_xlate lang="ja">アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。</reboot_details_xlate>
      </reboot_details>
      <per_device_install_time_seconds>0</per_device_install_time_seconds>
    </install>
    <uninstall>
      <uninstall_caps silent="no"/>
      <command></command>
      <command_params></command_params>
      <reboot_required value="no"/>
    </uninstall>
  </installation>
</cpq_package>
