# changelog

author: Linux Storage Driver Team <iss_storagedev@hp.com> 3.6.28-20
changelog:
  - Bump max_sectors to 8192 for the scsi half of the cciss driver for
     increased tape block size.
   - Fixed reporting of RAID levels in /proc/driver/cciss that use to report
     as unknown.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - 8.4.0 release (Severity: Medium)
  - ENHANCEMENTS
  - Rebuilt the driver against current distribution kernels


author: Chad Dupuis <Linux_SWdeliverables@external.groups.hp.com> 3.0-1
changelog:
  - Initial version that works with inbox fibre channel drivers only
    (Severity: Critical)
  - Fix grep statement that parses /sys/block for sd devices in lssd
    (Severity: Minor)
  - Add support for five character device names in lssd (Severity: Minor)
  - Fix parsing of sdsd* devices in lssd


author: Chad Dupuis <Linux_SWdeliverables@external.groups.hp.com> 3.1-1
changelog:
  - Added support for Brocade HBAs (Severity: Medium)
  - Added support for getting WWN from MSA2xxx devices in scsi_info


author: Kumar Rahul<Linux_SWdeliverables@external.groups.hp.com> 3.2-5
changelog:
  - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - FIXES
  - Fixed an issue where running multiple instances of .hplog -i' may cause more than 90% CPU utilization. 
  - Fixed an issue where the servers with large amount of memory may ASR during memory initialization. 
  - Fixed an issue where the hpasmlited was not notifying the agents of memory events on HP ProLiant G6 servers.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.6
changelog:
  - ENHANCEMENTS
  - Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers.

  - FIXES
  - Fixed the hpasmcli -s .show dimm. command to prevent isolated occurrences of segmentation fault.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - hpasmlited now supports long IML messages. 
  - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. 

  - FIXES
  - Fixed the following issues: 
         1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 
         2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 
         3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2)  broadcast storm occurs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.1
changelog:
  - FIXES
  - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un  responsive due to network storm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.2
changelog:
  - FIXES
  - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera  ture threshold and improperly shut the system down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. 
  - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such  as SNMP agents like cmasm2d from hp-snmp-agents. 
  - Added 64-bit hpbootcfg utility.

  - FIXES
  - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. 
  - Fix POSIX-compliancy issue with initscript. 
  - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu   tdowns may take an extended amount of time.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when   the system is in stress.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - 8.4.0 release (Severity: Medium)
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant G6 servers. 
  - Added Trusted Platform Module (TPM) awareness. 
  - Removed the script dependency between the hp-health and hp-snmp-agents RPM. To enable just storage agents, customers now in  stall the hp-health and hp-snmp-agents. If the "/etc/init.d/hp-health" file is removed or renamed, the storage agents will   st  art if configured in the /opt/hp/hp-snmp-agents/cma.conf file. 
  - Enabled the selective bubbling up of events in Integrated Management Log. 
  - Init scripts .status. function for hp-snmp-agents & hp-health now differentiates whether an agent exited normally or abnorm  ally. 
  - Added support for CpqHeResMem2 MIBs. 
  - The following MIB tables have been deprecated.  These tables will be removed in a future release: cpqSiMemModuleTable, cpqH  eResMemBoardTable, cpqHeResMemModuleTable. The data in these tables will be available in the new cpqHe2ResMemModuleTable &   cpqHe2ResMemBoardTable MIB tables.

  - FIXES 
  - Fixed an issue where the cmasm2d agent used to log the following error in cma.log after an iLO reset had been occurred: "cm  asm2d[7880]: sm2_ioctl: Index mismatch 50 != 51, retrying receive". 
  - Fixed an issue when a fan removed or failed, the overall thermal and fan status will be updated correctly in System Managem  ent Homepage. 
  - Fixed an issue where the System Management Homepage was not displaying the file system details of a USB key after unmountin  g and mounting it again. 
  - Fixed an issue where the agents used to send the trap email twice after a restart. 
  - The shut down notification sent by cmapeerd daemon is now acknowledged by all agents before the cmapeerd shuts down. This w  ill eliminate the sporadic error messages logged by the agents during shut down. 
  - The build number will now increment when the hp-snmp-agents rebuild.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.2
changelog:
  - ENHANCEMENTS
  - Add support for HP ProLiant DL160 G6 Server, HP ProLiant DL180 G6 Server, and HP ProLiant ML150 G6 Server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - ENHANCEMENTS
  - Added support for HP 6GB Serial Attached SCSI (SAS) hard drives. 
  - Added support for Intel ICH10 SATA IDE controller. 
  - Added support for HP NC362i Integrated Dual Port Gigabit Server Adapter. 
  - Added support for NetXen and HP NC-Series Intel e1000e Driver to send the traps. 
  - Added support for multi-board chassis product name and ID. 
  - Updated cmasm2d polling cycle to reduce system workload. 
  - Added the performance agents (cmaperfd).

  - FIXES
  - Fixed an issue where Linux event daemon reported RAID 1 inconsistency events. 
  - Fixed an issue where cmaidad agents send bad request commands to HP P700m Smart Array controller.
  - Fixed an issue with inconsistent data by setting Monitor and performance data buffers to zero before issuing ioctls to HP S  mart Array B110i SATA raid controller. 
  - Fixed an issue where HP Smart Array B110i SATA raid controller was displayed twice as HP Smart Array B110i SATA raid contro  ller and standard IDE controller. 
  - Fixed an issue where incorrect PCA Part number and system ID details sent in trap email. 
  - Fixed an issue where agent crashed when multiple VLANs are created and link up/down events are generated. 
  - Fixed an issue with displaying HP BL p-Class rack data in the System Management HomePage. 
  - Fixed an issue where cmahealthd sends the 6064 trap correctly when correctable memory errors are occurred. 
  - Fixed an issue where System Management Homepage correctly displays the FB DDR3 DIMM type information. 
  - Fixed an issue on HP ProLiant DL320 G6 server where the 6018 trap is not sent correctly when the temperature sensors are ov  erheated. 
  - Fixed the customer issue to use bond IP while sending traps if bondX is chosen as param in cma.conf.  
  - Fixed problem with cmarackd startup.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information   if the power supply supports error reporting. 
  - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. 
  - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. 
  - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. 
  - Updated the SIM event severity to .informational. after the secure erase is completed. 
  - Added support for HP NC362i Integrated Dual Port. 

  - FIXES
  - The cmapeerd agent logs the error .sendto() failed. to cma.log file. 
  - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. 
  - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. 
  - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. 
  - The Part Number displayed incorrectly. 
  - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. 
  - The System Id displayed incorrectly on the System Management Homepage (SMH). 
  - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. 
  - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). 
  - The multipath status was displayed as "unknown" when a drive failed. 
  - The failed logical drive status displayed incorrectly during an array move, expansion or shrink.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant  G7 Servers. 
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Included a document called  HP_SNMP_Trap_Guide.txt  that  describes the Linux SNMP trap ID messages generated by the agent 
  - Improvements to distribution identification including more consistent output and increased support for community and region  al   distributions. 
  - Added support for Solid State Drives. 
  - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/  MSA2324sa when co  nnected to HP SC08Ge Host Bus Adapter.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
       .	HP NC542m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP StorageWorks CN1000E Dual Port Converged Network Adapter 
       .	HP NC550m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter 
       .	HP NC551i Dual Port FlexFabric 10Gb Network Adapter 
       .	HP NC362i Integrated Dual Port Gigabit Server Adapter 
       .	HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter 

  - FIXES
  - Modified the 6064 trap implementation to reflect the correct error. 
  - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. 
  - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. 
  - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. 
  - Modified the script to get the NIC ports details from /sys/class/net. 
  - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat  ion instead of subsytem device information.  
  - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. 
  - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section.  
  - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. 
  - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H  Pcmanic.pp).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
         . HP NC551m Dual Port FlexFabric 10Gb Adapter 
         . HP NC551i Dual Port FlexFabric 10Gb Adapter 
         . HP NC365T 4-port Ethernet Server Adapter 
         . HP NC543i 10Gb 2-port  4X Flex-10  QDR Server Adapter 
         . HP NC553m 10Gb 2 port FlexFabric Converged Network  Adapter 
         . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC552SFP 2-port 10Gb Server Adapter 
         . HP StorageWorks CN1000Q Dual Port Converged Network Adapter 
         . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter    

  - FIXES
  - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. 
  - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o  utput to /dev/null. 
  - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. 
  - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.6.0
changelog:
  - ENHANCEMENTS
  - Added support for the MIBs in the Power Supply Table.
  - Added support for the MIB that specifies the version of Insight Management Agents running on the system.
  - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter.

  - FIXES
  - Addressed the tape drive not being displayed on the SMH on few configurations.
  - Displayed the placement correctly for the failed drive after reboot.
  - On Cmax, net-snmp displayed duplicate registration message on the syslog.
  - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. 
  - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. 
  - Added support to report USB key/SD card information. 
  - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. 
  - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". 
  - Added Physical Disk Temperature support.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.6-5
changelog:
  - Added more support for SMART data (smartmontools).
   - Improved physical drive serial number reporting accuracy.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.6-8
changelog:
  - Corrected memory leak that could occur if hpacucli is run in a loop to
     monitor drives.  
   - Providing more information availability to SMARTMONTOOLS.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.6-13
changelog:
  -  Change driver to ignore rebuild progress in RIS and always start at 0%.
      This will guarantee that even if drive was replaced we will still copy
     all data over.
   - Change driver to ensure that drive write cache is enabled during
     rebuild.  This will help speed up rebuild times significantly, and make
     the behavior more predictable.


author: Rajeshwari <stsd-ailsa@hp.com> 1.8.0-1
changelog:
  - Support for Standard Streams in Hponcfg (Severity: Major)
  - Inclusion of iLO reset notification (Severity: Major)
  - Included the Packager and URL sections to adhere to the rpm commonality
    specifications. (Severity: Minor)
  - Changed "hpasm" to "hp-snmp-agents" in the requires section.
    (Severity: Critical)


author: Rajeshwari <stsd-ailsa@hp.com> 1.8.0-1
changelog:
  - Made some changes in the rpm specification file which would ensure
    the binary is placed only in /sbin folder (Severity: Minor)
  - Modified Change log to adhere to specification; introduced version number.
    (Severity: Minor)


author: Rajeshwari <stsd-ailsa@hp.com> 1.8.0-2
changelog:
  - Made some modifications in the changelog section to adhere to updated
    RPM commonality specification. Added the Severity information.
    (Severity: Minor)


author: Pradeep <kumarpradeep.misra@hp.com> 1.9.0-1
changelog:
  - Made some changes in the hponcfg.spec to support the PSP8.2(Severity: Minor)
  - Made some changes to provide appropriate error messages when it encounters older drivers
    (Severity: Minor)
  - Modified Change log to adhere to specification; introduced version number
    (Severity: Minor)


author: Rajeshwari <stsd-ailsa@hp.com> 2.2.0-2
changelog:
  - Extension of -w option to include more iLO configuration
  - Fixed an issue where previous version of hponcfg failed to support older iLO Channel Interface drivers


author: Rajeshwari <stsd-ailsa@hp.com> 3.0.0-1
changelog:
  - Support for iLO3, iLO3 identification
  - Fixed an issue related to dynamic linking of hponcfg with libcpqci.so to resolve rdp related issue.


author: Ver:SMHCHANGELOGVERSION
changelog:
  - IPv6 support
  - New interface and icons
  - Command Line Log Reader
  - Command line interface for SMH configuration
  - XEN server support
  - VMware 4.0 support
  - Log localization
  - Apache 2.2
  - OpenSSL 1.0.0h
  - PHP 5.3.10
  - LibXML2 2.7.8
  - curl 7.21.7


author: HP Linux VCA <hplinuxvca@hp.com> 6.1.0-6
changelog:
  - Partial Fix provided for src.rpm deployment. Fixed MPTLINUX & CCISS RPMs are not installing. (Severity: Medium)


author: HP Linux VCA <hplinuxvca@hp.com> 6.1.0-8
changelog:
  - Fix provided for "QXCR1001006937 - LVCA deployment task fails if any component is already installed". (Severity: High)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-1
changelog:
  - Enhanced VCA to support VCRM Report. (Severity: Medium)
  - Enhanced VCA to update status to Major, when inventory collection fail. (Severity: Medium)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-2
changelog:
  - Rhel6 SOS Support provided
  - Fix provided for "QXCR1001014236 - Logs do not show return code in the log details summary".(Severity: Medium)
  - Fix provided for "QXCR1001047458 - [JPN][LinuxVCA] Install button name does not display button name propely".(Severity: Med  ium)
  - Fix provided for "QXCR1001050478 - JP: Win VCA: Change Settings: string for new check box needs to be translated".(Severity  : Medium)
  - Fix provided for "QXCR1001051969 - DE:Accounts in User group not cover Not installed software table in VCA6.2b1".(Severity:  High)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-3
changelog:
  - Fix provided for "QXCR1001056730 - [JPN] "Not Installed" category does not translated to Japanese".(Severity: High)
  - Fix provided for "QXCR1001038269 - Change of text in VCA homepage".(Severity: Low)
  - Fix provided for "QXCR1001026486 - [LinuxVCA] Discrepancy in Clear the Version Control Agent Log page".(Severity: Medium)
  - Fix provided for "QXCR1000966733 - VCA not listing the versions if "Install with Minimum dependency."(Severity: Medium)
  - Fix provided for "QXCR1001055621 - Latest Help Doc's are not incorporate in VCA Help".(Severity: High)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-4
changelog:
  - Fix provided for "QXCR1001047743 -  Not able to connect VCA to VCRM when port 2301 is disabled in VCRM machines SMH.(Severity: High) 
  - Fix provided for "QXCR1001051222 -  "Change settings" page in VCA6.2 is vulnerable to XSS.(Severity: High) 
  - Fix provided for "QXCR1001057499 -  Mandatory support pack checkbox is enabled without selecting a CSB.(Severity: High) 
  - Fix provided for "QXCR1001057894 -  In Replicate agent Settings Mandatory support pack configuration value is not di.(Severity: High) 
  - Fix provided for "QXCR1001058455 -  Version number is not properly displayed in installed version column after downg.(Severity: High) 
  - Fix provided for "QXCR1001058807 -  Change text of "refresh the inventory data" & "change agent settings" tab of VCA.(Severity: High) 
  - Fix provided for "QXCR1001060660 -  Linux VCA JPN: Search in help pages does not work with Japanese strings.(Severity: High)
  - Fix provided for "QXCR1001047453 -  [JPN][LinuxVCA] Japanese translation file (inventory.xsl) needs to update.(Severity: Medium)
  - Fix provided for "QXCR1001051964 -  EN:Exactly Match and Installed component checkbox need enhancement.(Severity: Medium)
  - Fix provided for "QXCR1000966733 -  VCA not listing the versions if "Install with Minimum dependency" is checked.(Severity: Medium)
  - Fix provided for "QXCR1001008434 -  "Change Agent Settings" is changed to "Change Settings"?.(Severity: Low)
  - Fix provided for "QXCR1001038269 -  Change of text in VCA homepage.(Severity: Low)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-5
changelog:
  - Fix provided for "QXCR1001016228   Logs Tab: VCA Log does not show "clear the log" button"(Severity: Low)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-6
changelog:
  - Fix provided for "QXCR1001063739 - Invalid Characters msg is displayed while trying to configure vca to vcrm.(Severity:High)


author: HP Linux VCA <hplinuxvca@hp.com> 6.2.0-7
changelog:
  - Fix provided for "QXCR1001063225 - [JPN] new messages added with English in Japanese xsl and dtd files."(Severity:High)


