# changelog

author: QLogic Corp <support@qlogic.com> 8.07.00.28.07.0-k1-1
changelog:
  - 8.07.00.28.xx.y-k1
  RHEL7, RHEL6:
  - qla2xxx: Check if the INQ response buffer is > 170 (instead of >=)
  - qla2xxx: Fix invalid offset reference of inquiry response data.
  - qla2xxx: Fix modinfo text for ql2xenabledif and ql2xenabledif_tgt.
  - qla2xxx: set ql2xenabledif_tgt enabled by default.
  - qla2xxx: Handle INQ data changed check condition.
  - qla2xxx: Fix for issue where the scsi status was getting overwritten.
  - qla2xxx: Fail module load on user config errors.
  - qla2xxx: Check for success of INQ response before parsing.
  - qla2xxx: Check for INQ response validity before parsing the response.
  - qla2xxx: Control the vendor T10 DIF feature via ql2xenabledif_tgt module parameter.
  - qla2xxx: Mark DIF errors from target as re-tryable errors.
  - qla2xxx: Do not turn off T10 DIF on a port reset.
  - qla2xxx: Remove DIX0 registration with SCSI.
  - qla2xxx: Add routines to get LBA from the SCSI CDB.
  - qla2xxx: Enable T10 DIF for reads as well.
  - qla2xxx: Enable SCSI T10 DIF registration during driver probe.
  - qla2xxx: Initial check-in for vendor T10 DIF.

  - 8.07.00.28.xx.y-k
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS65, XS6:
  - qla2xxx: Fix endianess of fdmi smartsan security support field.
  RHEL7:
  - qla2xxx: Reduce target mode performance hit in ISR.

  - 8.07.00.27.xx.y-k
  RHEL7:
  - qla2xxx: Avoid crossing initiator/target modes during AEN handling.

  - 8.07.00.26.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Set smartsan security support to 1.
  - qla2xxx: Add support for ISP2271.
  - qla2xxx: Fix missing device login retries.
  - qla2xxx: do not clear slot in outstanding cmd array.

  - 8.07.00.25.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Remove decrement of sp reference count in abort handler.
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - extras: Fix whitespace in .sh files.

  - 8.07.00.24.xx.y-k0
  RHEL5
  - Update 24xx/25xx firmware to version 8.01.00.

  - 8.07.00.24.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Do not crash system for sp ref count zero.
  - qla2xxx: Do not reset adapter if SRB handle is in range.
  - qla2xxx: Don't reset ISP when error entry with out of range handle.
  - qla2xxx: Add support for MPI and PEP FW version for ISP 27xx.

  - 8.07.00.23.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Fix RPD response missing fabric name
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: fix porting changes for SmartSAN
  RHEL5:
  - qla2xxx: Fix Link Service Request payload word 0.
  - qla2xxx: Cleanup and Silence unnecessary PUREX/RDP printouts.

  - 8.07.00.22.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Allow RPRT to work with all switches (mgmt srvr loopid).
  - qla2xxx: Use physical port for sending RPRT command.
  - qla2xxx: Use correct macro for SFP flags.
  - qla2xxx: Add adapter checks for FAWWN functionality.
  - qla2xxx: Update default Hostname.
  RHEL5:
  - qla2xxx: Corrections to FDMI registering routines.
  - qla2xxx: Corrections to FDMI processing routines.
  - qla2xxx: Corrections ro PUREX/RDP proessing.

  - 8.07.00.21.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: additional fdmi_register() attempt.
  - qla2xxx: Fix missing SFP flags from RDP Payload.
  - qla2xxx: driver fails to detect 4G adapters.
  - qla2xxx: Pause risc before manipulating risc semaphore.
  - qla2xxx: Use ssdid to gate semaphore manipulation.
  - qla2xxx: Handle AEN8014 incoming port logout.
  - qla2xxx: Add serdes register read/write sysfs support for ISP25xx.

  - 8.07.00.20.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS6.5, XS6.x:
  - qla2xxx: Trigger FDMI registration for RPRT.
  - qla2xxx: Remove SmartSAN attributes from the RDP payload.
  - qla2xxx: Allow FDMI Hostname registration during boot.
  - qla2xxx: Updated Active FC4 port type.

  - 8.07.00.19.xx.y-k
  RHEL7.x, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: FDMI RDP command support.
  - qla2xxx: Support for FDMI Smart SAN Mamangement commands
  UEK2:
  - qla2xxx: Fix wrongly report "PCI EEH busy" when get_thermal_temp.

  - 8.07.00.18.xx.y-k
  RHEL7.x, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled.
  - qla2xxx: Prevent multiple firmware dump collection for ISP27XX.
  - qla2xxx: Add serdes read/write support for ISP27XX
  - qla2xxx: Don't reset ISP when we receive an error entry with an out of range handle.
  - qla2xxx: Do not crash system for sp ref count zero
  RHEL7.x, RHEL6, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port.
  - qla2xxx: Disable Interrupt handshake for ISP27XX.
  - qla2xxx: Add debugging info for MBX timeout.
  - qla2xxx: Do not reset adapter if SRB handle is in range.
  RHEL7.x, SLES12, XS 6.5:
  - qla2xxx: Add support for Legacy and MSI interrupt modes.
  RHEL7.x:
  - qla2xxx: Fix compiler issue for FC_PORTSPEED_32GBIT on RHEL 7.1


  - 8.07.00.17.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Add udev notification to save fw dump for ISP27XX.
  - Add message for sucessful FW dump collected for ISP27XX.
  - Add fix for beacon for ISP27XX.
  - Increase the wait time for firmware to be ready for P3P.
  RHEL7, RHEL6, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Disable FCE and FET tracing for ISP27XXX.
  - Add support to load firmware from file for ISP 26XX/27XX. 
  RHEL7, SLES12, XS 6.5:
  - Fix crash due to wrong casting of reg for ISP27XX.

  - 8.07.00.16.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS 6.5, XS 6.x:
  - Mark port lost when we receive an RSCN for it.
  - Disable PCI device in shutdown handler.
  - Fail adapter initialization on load ram failure.
  - Move warning message to debug level.
  - Restore WWPN from flash when cable pulled for FA-WWPN port.

  - 8.07.00.15.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES12, UEK, UEK2, XS:
  - Restore WWPN in case of Loop Dead.
  - Honor FCP_RSP retry delay timer field.
  - Add missing ISP27xx checks to optrom code.
  - Force use of mailbox interface for flash access commands for ISP27xx.
  - Fix mismatch is checks to free sysfs nodes.
  - Disable laser for ISP2031 while unloading driver.
  - Enable DPORT using NVRAM parameters.
  RHEL5:
  - Disable FDMI by default.
  - Fix FW dump issue for ISP82XX. 
  - Add 25xx firmware version 7.05.00.

  - 8.07.00.14.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Add fix in driver unload for pending activity.
  - Allow user to change ql2xfdmienable value.
  - Declaration error cause stack corruption.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Fix duplicate log message ID.
  - Fix driver version string message.
  RHEL7, RHEL6, SLES11, UEK, XS:
  - Unload of qla2xxx driver crashes the machine.
  RHEL5:
  - Enable FDMI by default. 
  - Add 24xx/25xx firmware version 7.04.00.

  - 8.07.00.13.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Remove restriction on starting remote device discovery on port update.
  - Allow nvram bit to enable FA-WWN.
  - Allow nvram bit to enable D-PORT.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Move mailbox failure messages to a default debug level.

  - 8.07.00.12.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Correction to FA-WWN for un-acquiring portname.
  - Add scatter/gather table size module parameter.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Add ql2xasynclogin module parameter.
  RHEL5:
  - For netlink response use respective sender's unique pid.

  - 8.07.00.11.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Fix incorrect debug printk.
  - Add D-Port functionality.
  - Add FA-WWN functionality.
  - Add FDMI-2 functionality.
  - ISPFx00 unexpected resets during adapter boot sequence.
  - Incorrect linked list semantic in qlafx00_get_fcport().
  - Add unknown parameter error handling to build.sh.

  - 8.07.00.10.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Fix potential return count bug in qla2xxx_get_vpd_field().
  - ISPFX00 avoid writing semaphore register in request_irqs().
  - ISP27xx fwdump template error print simplification.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - ISP25xx multiqueue shadow register crash fix.
  - Correction of debug level in mailbox command print 0x1111.

  - 8.07.00.09.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Enable fast flash access for ISP83xx.
  - Do logins from chip reset in DPC thread instead of error handler thread.
  - Remove wait for online from host reset handler.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx fwdump add tests for incomplete template.
  - ISP27xx fwdump optimize template entry table lookup.
  - ISP27xx fwdump add template entry T275 (insert buffer).
  - ISP27xx fwdump template remove high frequency debug logs.
  - ISP27xx fwdump template fix insertbuf() routine.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Add endianizer to T10 PI max_payload_size modifier.
  RHEL5, SLES10:
  - Allow ELS commands with variable size command/data.
  RHEL5:
  - Add 24xx/25xx firmware 7.03.00.

  - 8.07.00.08.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Add MBC option for fast SFP data access.
  - Remove ISP8044 from pci table.
  - Revert "Change default capture to firmware defined capture mask".
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Remove mapped vp index iterator macro dead code.
  RHEL5:
  - Add shutdown callback handler.

  - 8.07.00.07.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset.
  - Reduce the time we wait for a command to complete during SCSI error handling.
  - Delay driver unload if there is any pending activity going on.
  - Don't check for firmware hung during the reset context for ISP82xx.
  - Fix beacon blink logic for ISP26xx/83xx.
  - Add mention of RHEL7 and SLES11.3 in README.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx firmware dump template spec updates (including T274).
  - ISP27xx queue index shadow registers.
  - Fix ISPFx00 not displaying the correct FW version after FW update through sysfs Interface.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Clear loop_id for ports that are marked lost during fabric scanning.
  - Fixup looking for a space in the outstanding_cmds array in qla2x00_alloc_iocbs().

  - 8.07.00.06.xx.y-k
  RHEL7, RHEL6, SLES11, SLES10, UEK, UEK2, XS:
  - Avoid escalating the SCSI error handler if the command is not found in firmware.
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Change default capture to firmware defined capture mask.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Adjust adapter reset routine to the changes in firmware specification for ISPFx00.

  - 8.07.00.05.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, XS:
  - Add #if around printk_ratelimit to fix build issue on RHEL 6.
  - Add 'sparse_endian' command line option to build.sh
  - Fix build errors related to invalid print fields on some architectures.
  - Poll during initialization for ISP25xx and ISP83xx.
  - Add target mode definitions [SLES 11 SP3 specific].
  - ISP8044 ipmdio bus timeout improvement.
  - Remove configure VFs mailbox command call.
  - Use proper log message for flash lock failed error for ISP82XX.
  - IOCB data should be copied to I/O mem using memcpy_toio.

  - 8.07.00.04.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, Citrix:
  - Add sparse command line option.
  - Add 8044 serdes bsg interface.
  - Correction to 27xx template entry types 256 and 258.
  - Track the process when the ROM_LOCK failure happens.
  - Introduce fw_dump_flag to track fw dump progress.
  - Remove unnecessary code from qlafx00_intr_handler.
  - Enable fw_dump_size for 8044.
  - Update entry type 270 to match spec update for 27xx.
  - Change copyright year to 2014 in all the source files.
  - Remove unnecessary delays from fw dump code path.
  - Use jiffies instead of time.
  - Decrease pci access for response queue processing for ISPFX00.
  - Use proper log message for flash lock failed error.
  - Include <delay.h> file for msleep declaration in qla_nx2.c.
  - Correct the port no assignment for ISP82XX.
  RHEL5:
  - Add 24xx/25xx/81xx/83xx FC and FCoE Firmware 7.02.00.
  - IOCB data should be copied to I/O memory using memcpy_toio().
  - Use the physical port for all loopback operations.

  - 8.07.00.03.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Wait for reset completion without lock for ISPFX00.
  - Add pci device id 0x2271.
  - Add pci device id 0x2071.
  - Fix Task Management command asynchronous handling
  - Add IOCB Abort command asynchronous handling
  - Do not schedule reset when one is already active when receiving an invalid status handle.
  - Add and use 32Gbps FC-GS definitions.
  - Correct operations for ISP27xx template types 270 and 271.
  - Fix sparse warnings in qla_mr.c
  - Allow 83XX and 27XX both to write req_q_out register.
  - Correct 83xx/27xx mislogic in setting out_mb in qla25xx_init_req_que().
  - Check for peg alive counter and clear any outstanding mailbox command.
  - Log when device state is moved to failed state.
  - Issue abort command for outstanding commands during cleanup when only firmware is alive.
  - Support of new Helga minidump opcodes QLA8044_RDDFE(38), QLA8044_RDMDIO(39),QLA8044_POLLWR(40).
  - Allow the next firmware dump if the previous dump capture fails for ISP8044.
  - Add build.sh commandline option help/description to README file.

  - 8.07.00.02.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Allow ISP83xx and ISP27xx to use read/write remote register.

  - 8.07.00.01.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, UEK2/R3, Citrix:
  - Remove pci device id ISP2071.

  - 8.07.00.00.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Add support for ISP2701.
  - Remove Marker type IOCB logic for ISPFX00.
  - Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec
  - Add BE support for ISPFX00.
  - Avoid poisoining in the response queue for ISPFX00.
  - Simplyfy the ISPFX00 interrupt handler code for ISPFX00.
  - Optimize the response queue processing for ISPFX00.
  RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix:
  - Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for Helga.
  - Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  UEK2/R3:
  - Clear drv active before removing the host.
  - Wait for reset completion without lock for ISPFX00.

  - 8.06.00.13.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Add mutex around optrom calls to serialize accesses.
  - Add handling for boot indication progress AENs
  - Replace constant value for IOCTL IOCB abort execution status with a macro.
  - Enable the Flash Access Control (FAC) mailbox command.
  - Use proper message for Non owner reset ACK Timeout.
  - Remove init control block related dead code for ISPFX00.
  - Select correct request queue for error type IOCB for ISPFX00.
  - The file README.qla2xxx does not mention SLES11.3 (or later).
  - Fix warning reported by smatch.
  - Properly handle 32 bit mailbox register for ISPFX00.
  - Set host can_queue value based on available resources.

  - 8.06.00.12.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Assign the correct pointer to the sp->ctx in abort context for ISPFx00 (BZ8627).
  - Obtain adapter model description from vpd (SLES10 only) (ER105124).
  - Use scnprintf() instead of snprintf() in the sysfs handlers.
  - Only complete dcbx_comp and lb_portup_comp for virtual port index 0.
  - Reset nic_core_reset_owner on moving from COLD to READY for ISP8044 (ER111788).
  - Revert "qla2xxx: Remove entry in outstanding_cmds array if we fail to abort a request."
  - QLAFX00 Replace a constant with a macro definition for host->canqueue assigmnment.

  - 8.06.00.11.xx.y-k (RHEL5 only)
  - Iterate the correct list for remote port removal.
  - Honor FCPORT_UPDATE_NEEDED dpc flag for all ISPs.
  - Don't set NPIV_CONFIG_NEEDED and RELOGIN_NEEDED flag for ISPFX00.

  - 8.06.00.10.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix):
  - Remove entry in outstanding_cmds array if we fail to abort a request.
  - Clear RISC INT reg only for an event and not always while polling.
  - Fix undefined behavior in call to snprintf().

  RHEL6, SLES11, UEK, Citrix:
  - Add BSG interface for read/write serdes register.
  - Fix request queue null dereference.
  - Disable adapter when we encounter a PCI disconnect..
  - Refactor shutdown code so some functionality can be reused.
  - QLAFX00 Fix issue with not displaying node name after system reboot.
  - Add changes to obtain ISPFX00 adapters product information.
  - Add IOCTL command abort logic for ISPFX00.

  RHEL5, SLES10:
  - Add netlink interface for read/write serdes register.
  - Fix udev fwdump rules.

  RHEL5:
  - Update 8G and 4G firmware to version 7.01.00.

  README:
  - Updated for builing kernel with out-of-box driver for Boot-from-SAN.
  - Updated for building ramdisk with rpm driver for Citrix Boot-from-SAN.

  - 8.06.00.09.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Honor execute firmware failures.
  - Add BPM support for 25xx.
  - Disable INTx interrupt for ISP82XX.
  - Correctly set mailboxes for extended init control block.
  - Duplicate luns instantiated after doing ISP reset.
  - Don't consider the drivers knocked out of IDC participation for future reset recovery process.
  - Change message displaying fcport pointer to port id.
  - Fix the sparse C=2 warnings for ISP8044.
  - Revert "qla2xxx: Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX."
  - Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."
  - Print proper QLAFX00 product name at probe.
  - Fix compile warnings in qlafx00_build_scsi_iocbs() on BE platforms.
  - Unloading driver crashes server due to not freeing sp pool (SLES10 only).
  - Update 8G and 4G firmware to 7.0.2. (RHEL5 only).

  - 8.06.00.08.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fixups for ISP8044 beacon blink.
  - Select link initialization option bits from current operating mode.
  - Move queue depth ramp down message to i/o debug level.
  - Correctly reset Graceful Reset Bit in IDC Driver Control Register.
  - Add a new interface to update versions.
  - Correctly print out/in mailbox registers.
  - Add #if preprocessor statements to get driver compiled on UEK2 and R3.

  - 8.06.00.07.xx.y-k (RHEL5 only)
  - Set the timeout value to 45 for IOCTL commands for ISPFx00.
  - Dump IOCB on IOCTL command timeout for ISPFx00.
  - Allocate outstanding cmd array and request queue under single hardware lock.

  - 8.06.00.06.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the reset owner on ready and failed state for ISP8044.

  - 8.06.00.05.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the idc control graceful bit for ISP8044 after initialization.
  - Don't check for firmware hung during the reset context.
  - Add loopback IDC-TIME-EXTEND aen handling support.
  - Clear presence bit for ISP8044 on unload and error.
  - Move Previous version info message to debug level.

  - 8.06.00.04.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Properly set the tagging for commands.
  - Get the mpi version for ISP8044.
  - Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  - Implementation of flash write buffer mode for ISP8044.
  - Helga loopback support.
  - Add pex-dma support for faster minidump capture on ISP8044.
  - Collect minidump for ISP8044 using sysfs.
  - Perform context reset instead of chip reset for ISP8044 host reset.
  - Don't the set nic_core_reset_owner flag for ISP8044.
  - Set IDC graceful reset and don't capture minidump if it is set.
  - Honor return value from qla82xx_device_state_handler() in qla82xx_abort_isp().
  - Silent noisy message during ISP8044 dump collection.
  - Correct debug print id's.
  - Add 8044 entry in udev rules.
  - Set default critical temperature when ISPFX00 firmware doesn't provide it.
  - QLAFX00 make over-temp AEN informational, add log for normal-temp AEN.
  - Correct Interrupt Register offset for ISPFX00
  - Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  - Send all AENs for ISPFx00 to above layers.

  - 8.06.00.03.xx.y-k (RHEL6, SLES11, RHEL5, UEK, Citrix)
  - Add changes in initialization for ISPFX00 cards with BIOS.
  - Add changes to support extended IOs for ISPFX00.

  - 8.06.00.02.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - ISP8044 abort isp.
  - Helga Flash Write.
  - Helga legacy pin based interrupt support.
  - Get all the optrom sysfs attributes for CNA.
  - Add ISP8044 to MIDTYPE macro.
  - Fix sparse warning reported for qla_nx2.c.
  - Helga Remove hardcoded return values by QLA_FUNCTION_FAILED.
  - Remove minidump and reset code if FCoE is not a owner.
  - Helga fcoe_nic_reset_owner updated.
  - Fix compilation issue on ia64.
  - Fix for serial_num not getting displayed via sysfs.
  - Add missing FCP statistics to sysfs interface.

  - 8.06.00.01.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Set VPD Size to 1K for ISP82XX, ISP8044, ISP8031 (ER107011).
  - Helga call flash recovery function from bootstrap code.
  - Clear the MBX_INTR_WAIT flag when the mailbox time-out happens.
  - Drop redundant log message when ROM lock failure happens during retries.
  - To update Helga minidump template capture.
  - Make log message that prints when a completion status requires a port down more readable.
  - Reconfigure thermal temperature.
  - Add setting of driver version string for vendor application.
  - Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.

  RHEL6, SLES11, UEK, Citrix:
  - Set the index in outstanding command array to NULL when cmd is aborted when the request timeout (ER107084).

  - 8.06.00.00.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fix for locking issue between driver ISR and mailbox routines.
  - Do not take a second firmware dump when intentionally generating one.
  - Move qla2x00_free_device to the correct location.
  - Add support for ISP8044.
  - Update firmware link in Kconfig file.
  - Perform coverity analysis from build.sh

  RHEL6, SLES11:
  - Correct multiqueue offset calculations.
  - Add module parameter for interrupt mode.
  - Fix incorrect test after list_for_each_entry() exits.
  - Do not query FC statistics during chip reset.

  RHEL5, SLES10:
  - Use spinlock while accessing vport list.

  SLES10:
  - Correction of operator in udev rules.

  - 8.05.00.03.xx.y-k (RHEL6, SLES11), 8.04.00.15.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add clarifying printk to thermal access fail cases.

  RHEL5, SLES10:
  - Move list add of ha to non-error section of probe_one.

  - 8.05.00.02.xx.y-k (RHEL6, SLES11), 8.04.00.14.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Revert "qla2xxx: Add setting of driver version string for vendor application."

  RHEL6, SLES11, UEK, Citrix:
  - Debug ID corrections.
  - Add iounmap(ha->cregbase) calls for ISPFX00 adapters for proper driver cleanup during load / unload.
  - Clear the outstanding command array for task management processing for ISPFx00.
  - Remove Request / Response transfer error AENs handling from qlafx00_async_event().
  - Proper cleanup of BSG request when the request time-out on ISPFx00.
  - Fix issue with calling sp_done() twice for task management commands.
  - Fix bug in cont_entry handling for the cases when FW provides more data than mid layer can handle.
  - Correction to structure size while registering host information with firmware.

  RHEL5, SLES10:
  - Use vp_list field of scsi_qla_host while traversing virtual ports list.

  - 8.05.00.01.xx.y-k (RHEL6, SLES11.x), 8.04.00.13.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add setting of driver version string for vendor application.
  - Integrate generic card temperature with mezz card temperature.
  - Correction of comment in MBC opcode defines.
  - Wait for IDC complete event to finish loopback operation.
  - Don't process state change aen for reset owner.
  - Don't process RSCNs for a vport on the same physical adapter.
  - Correct list-iteration bug in Report-ID Acquisition codes.

  RHEL6, SLES11:
  - Addedd logic to monitor aenmbx0 register for fixed intervals on ISPFx00.
  - Remove unnecessary operations from qlafx00_soc_cpu_reset() and
  add resetting IRQ ack register per core.

  RHEL5, SLES10:
  - Return -EINVAL when setting up loopback operation.

  RHEL5:
  - Inclusion of 8G firmware version 5.09.00.
  - Inclusion of 4G firmware version 5.09.00.

  - 8.05.00.00.xx.y-k (RHEL6.x and SLES11.x)
  - Enhancements to support ISPFx00.

  - 8.04.00.12.xx.y-k
  - Update the copyright information.
  - Display the lock owner on lock acquire failure.
  - Move loopback mode reset after chip reset check.
  - Extra loopback error handling for ISP83xx.
  - Do link initialization on get loop id failure.
  - Do MPI reset only for 81xx.

  V2632 (RHEL 6.x, SLES 11.x, Citrix 6.0, UEK):
  - Revert "qla2xxx: Optimize existing port name server query matching."
  - Revert "qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
  - Don't free pool that wasn't allocated.
  - Unload hangs after issuing BSG commands to vport.

  Citrix 6.0:
  - Create initrd as a part of installation and removal of the driver rpm.
  - RPM install should install driver under extra instead of driver directory.

  RHEL 5.x, SLES 10.x:
  - MBA_IDC_NOTIFY case should fallthru.
  - Add fw_dump_size sysfs attribute file.
  - Add test for validity of virtual host in netlink interface.

  SLES 10.x:
  - Add 8031/2031 cases to request firmware.

  - 8.04.00.11.xx.y-k
  - Move marking fcport online ahead of setting iiDMA speed.
  - Add 16Gb/s case to get port speed capability.
  - Get VPD information from common location for CNA.
  - Don't clear drv active on iospace config failure.
  - Display that driver is operating in legacy interrupt mode.
  - Add "16" speed to link speeds array in qla2x00_iidma_fcport() function
  - Correct race in loop_state assignment during reset handling.
  - Reject loopback request if one is already in progress.
  - Update the FTP site references in the driver sources.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Obtain loopback iteration count from bsg request.
  - Parameterize the link speed string conversion function.
  - Update ql2xextended_error_logging parameter description with new options.
  - Fix typo in qla2xxx driver.
  - Free rsp_data even on error in qla2x00_process_loopback().
  - Avoid null pointer dereference in shutdown routine.

  RHEL 5.x:
  - Remove fabric_logout() calls from qla2x00_dev_loss_tmo_callbk() function.

  SLES10.x:
  - Clear local references of rport on device loss timeout notification from FC transport.

  - 8.04.00.10.xx.y-k
  - Honor status value of 2 for report-id acquisition.
  - Ignore driver ack bit if corresponding presence bit is not set.
  - Add Gen3 PCIe speed 8GT/s to the log message.
  - Acquire risc semaphore before resetting ISP.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Ramp down queue depth for attached SCSI devices when driver resources are low.
  - Determine the number of outstanding commands based on available resources.
  - Fix for kernel crash when external loopback diagnostic is run through BSG interface.
  - Fix coccinelle warnings in qla2x00_relogin.
  - Test and clear FCPORT_UPDATE_NEEDED atomically.
  - Use correct Request-Q-Out register during bidirectional request processing
  - Fix typo in qla83xx_fw_dump function.
  - Move noisy Start scsi failed messages to verbose logging level.
  - Fix for warnings reported by sparse.

  RHEL 5.x:
  - Inclusion of 4G/8G firmware version 5.08.00.
  - Log message when qla2xenablemsix module parameter is set to 2 (MSI mode) and adapter does not support MSI mode.
  - Revert "qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports"
  - Revert "qla2xxx: No fcport FC-4 type assignment in GA_NXT response."

  Citrix 6.x:
  - RPM build should hide the directory naming convention from user.

  - 8.04.00.09.xx.y-k
  - No fcport FC-4 type assignment in GA_NXT response.
  - Fix checkpatch error in qla2xxx_mctp_dump.
  - Change in setting UNLOADING flag and FC vports logout sequence while unloading qla2xxx driver.
  - Clear unsupported 'states' during Get-FW-State queries.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Pass correct parameters while creating an initrd.
  - Remove spurious taking of ha->vport_slock spinlock.

  UEK:
  - Add macro for kernel extended version.

  RHEL 5.x:
  - Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports.
  - Pass correct parameters while creating an initrd.

  - 8.04.00.08.xx.y-k (RHEL 6.x, SLES 11.x, UEK and Citrix)
  - Correct loop_id_map allocation-size and usage.

  - 8.04.00.07.xx.y-k
  - Prefix qla2xxx with the dump file name.
  - Delay for legacy interrupts not required for all boards for ISP83xx.
  - Use correct logger path in udev scripts.
  - Allow MSI interrupt registration for ISP82xx.
  - Don't toggle RISC interrupt bits after IRQ lines are attached.
  - Fix for legacy interrupts for ISP83xx.
  - Restrict nic core reset to one function for mctp.
  - Update to Implementation of the mctp.
  - Enable fw attributes for ISP24xx and above.
  - Get fcal position map should not be called for p2p topology.
  - Set Maximum Read Request Size to 4K.
  - Enclose adapter related calls in adapter check in failed state handler.
  - Fix for handling some error conditions in loopback.
  - Fix description of qla2xmaxqdepth parameter.
  - Set idc version if function is first one to come.-
  - Do not restrict the number of NPIV ports for ISP83xx.
  - Do PCI fundamental reset for 83xx.
  - Fail initialization if unable to load RISC code.
  - Ensure PLOGI is sent to Fabric Management-Server upon request.
  - Remove setting Scsi_host->this_id during adapter probe.
  - Use #defines instead of hardcoded values for intr status.

  V2632 (RHEL 6.x, SLES 11.x and UEK):
  - Remove dumping fw on timeout for bidirectional commands.
  - T10 DIF - ISP83xx changes.
  - Fix incorrect status reporting on DIF errors.
  - Change log messages to dbg and remove dumping fw on timeout for bidirectional.
  - Use the right field for container_of.

  SLES10.x:
  - Correct implementation of qla2x00_get_idma_speed.
  - Remove check for ISPs other than ISP81xx from qla81xx_set_port_config

  RHEL5.x:
  - Add stubs for edc and edc_status interface.

  - 8.04.00.06.xx.y-k
  - Don't call nic restart firmware if it is already active and running.
  - Wrong PCIe (2.5Gb/s x8) speed in the kernel message for ISP82xx.
  - Perform ROM mbx cmd access only after ISP soft-reset during f/w recovery.
  - Fix rval may be used uninitialized in this function warning.
  - Implement beacon support for ISP83xx CNA.
  - Fix for continuous rescan attempts in arbitrated loop topology.
  - Only enable link up on the correct interrupt event.
  - Update the driver license.
  - Don't register legacy interrupts for ISP82xx.
  - Add bit to identify Sensei card for thermal temp.
  - Implementation of MCTP.
  - IDC implementation for ISP83xx.
  - Add FW DUMP SIZE sysfs attribute.
  - Implementation of bidirectional.
  - Use bitmap to store loop_id's for fcports.
  - Display mailbox failure by default.
  - Remove redundant NULL check before release_firmware() call.
  - Add check in qla82xx_watchdog for failed hardware state.
  - Add I2C BSG interface.
  - Use dracut to rebuild the initramfs on RHEL 6 in build.sh.
  - Don't call failed handler for default case.
  - Add hilda fc fcoe entries in the udev rules file.

  - 8.04.00.05.xx.y-k
  - Display proper firmware version when new minidump template is gathered for ISP82xx.
  - Properly check for current state after the fabric-login request.
  - Proper completion to scsi-ml for scsi status task_set_full and busy.
  - Don't capture minidump for ISP82xx on flash update from application.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Optimize existing port name server query matching.
  - Remove mirrored field vp_idx from struct fc_port.
  - Display proper supported speeds for 16G FC adapters.
  - Fix reset time out as qla2xxx not ack to reset request.
  - Stats should be different from physical and virtual ports.
  - Block flash access from application when device is initialized for ISP82xx.
  - Handle interrupt registration failures more gracefully.
  - Logic to detect overheat condition and fail ISP82xx.
  - Remove unneeded DPC wakeups from qla82xx_watchdog.
  - RHEL 5.x/SLES 10.x
  - Revert : IO failure during ISP82xx reset.
  - Revert : Avoid depending on SCSI host_lock in queuecommand function.

  - 8.04.00.04.55.6-k
  - 8.04.00.04.32.1-k
  - ISP83xx(16G FC) support for Xenserver 6.0 and Oracle UEK.

  - 8.04.00.04.xx.y-k
  - Remove resetting memory during device initialization for ISP82xx.
  - Proper detection of firmware abort error code for ISP82xx.
  - SLES10 SPx: Add udev script, udev rules file, kmdtool.
  - SLES10 SPx: Proper notification of device udev event for automatic gathering of firmware dump.

  - 8.04.00.03.xx.y-k
  - Correct link-reset regressions introduced during 83xx porting.
  - Avoid invalid request queue dereference for bad response packets.
  - Stop iteration after first failure in -_id functions.
  - Fix incorrect register access in qla2x00_start_iocbs().
  - Fix to update proper command completion upon command retries.
  - Hard code the number of loop entries at 128.
  - Reference proper scsi_qla_host structure for processing non-scsi SRB commands.
  - Handle device mapping changes due to device logout.
  - Fix wrong decrement, null sp access.
  - Initialize the command done routine.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Complete mailbox command timedout to avoid initialization failures during next reset cycle.
  - Add ha->max_fibre_devices to keep track of the maximum number of targets.
  - Cache swl during fabric discovery.
  - Remove EDC sysfs interface.
  - Perform firmware dump procedure on mailbox command timeout.
  - Change the log message when previous dump is available to retrieve for ISP82xx.
  - Remove check for null fcport from host reset handler.
  - Correct out of bounds read of ISP2200 mailbox registers.
  - Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
  - Reduce mbx-command timeout for Login/Logout requests.
  - Clear options-flags while issuing stop-firmware mbx command.
  - Add an "is reset active" helper.
  - Prep zero-length BSG data-transfer requests.
  - Perform implicit logout during rport tear-down.
  - Handle failure cases during fabric_login
  - Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
  - Add check for null fcport references in qla2xxx_queuecommand.
  - Handle change notifications based on switch scan results.
  - Use consistent DL mask for ELS/CT passthru requests.
  - Consolidation of SRB processing.


author: Broadcom Build Environment
changelog:
  -FW upgrade not possible when NIC ethernet interface is not up (61314)
  -5719 rx_fcs_errors randomly increment when connected to  Dell power connect 6224 (66991)
  -5719 shows link when cable is NOT plugged in (67200)
  -BCM5720 unknown messages show in lspci on RHEL6.4 beta (67849)
  -Changes in flow control not reflected in OEM specific system stats when using Rhel6.2_x64 (66411)
  -The system fails to wake up from S1 by magic packet. (66759)


author: Broadcom Build Environment
changelog:
  -Add RH5.10 support.
  -Add RH6.5 support.
  -Linux : 5725 failed to enable EEE function. (70347)
  -Unable to wakeup from S3/S4 sleep mode. (70369)
  -Unexpected system shutdown when reload drivers. (70501)
  -tg3 ISO Driver has "Unknown symbol in Module" message on SUSE10.4. (70526)


author: Broadcom Build Environment
changelog:
  -Add RH7.0 support.
  -Poll cpmu link state on APE + ASF enabled devices
  -Expand 4g_overflow_test workaround to skb fragments of any size


author: Broadcom Build Environment
changelog:
  -Added Linux SRIOV support
  -Added iSCSI & FCoE HBA support for specific HP adapters and devices
  -Added VC4.10 support
  -Added BCV support
  -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence.
  -Allow UDP tunneling offload
  -Enable IPGRE RSS by default
  -Support different GRE RSS modes.


author: Broadcom Build Environment
changelog:
  -Add RH5.10 support.
  -Add RH6.5 support.
  -FC-TAPE - Host responds early to a requested resend delay - Linux (70101)
  -SLES11 MEZ75 IO halt with Nexus reboot tests (70728)
  -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187)
  -KVM gso and gro are not working on hv and vm as expected (70506)
  -SRIOV mtu toggle failure (70530)
  -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531)
  -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426)
  -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263)
  -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427)
  -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690)
  -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627)
  -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456)


author: QLogic Build Environment 7.12.37.1
changelog:
  - added RH5.11 support.
  - added RH6.6 & RH6.7 support.
  - added RH7.0 & RH7.1 support.
  - added SLES11-SP4 & SLES12 support.
  - added VLAN filtering offload support.
  - added Debian GNU/Linux 7 (wheezy) support.
  - In RHEL7.0 and 7.1, bnx2x will be rolled back to inbox after system reboot (80071).
  - SRIOV : MAC address change inside VM is not allowed unless interface is down (80309).
  - RH7.x:  Tunneling offload is not enabled (79269).
  - self test fails on 20G adapter (79295).
  - VF interface vlan-filtering stopped working (79365).
  - Fail to force link speed other than 20G in KR2 (77841).
  - Incorrect asymmetric flow-control behavior (75504).
  - Dynamic VF enumeration fails for 578xx adapter in SLES11 SP4 (78590).
  - Inner-to-outer vlan priority mapping doesn't work (RH6.x [pre 2.6.38 kernels]).
  - Packets from a VF with pvid configured which were sent with a different vlan were transmitted instead of being discarded.
  - UDP packets cannot pass to the upper application (5709).
  - Out of memory issue when the adapter is reset (5709).
  - iSCSI offload: Driver displaying incorrect remote port (77842).
  - FCoE offload: Initiators failed FLOGI on SLES 11 SP4 RC1 (79704).


