# packages

pkgId: 7c7a61ced162ccf7961403062085d03cda97e4a2
name: cpq_cciss
arch: x86_64
version: 3.6.28
epoch: 0
release: 7
summary: HP Proliant Smart Array Controller AMD64/EM64T Driver for Red Hat Enterprise Linux 5 AMD64/EM64T
url: http://www.hp.com/linux
rpm_license: GPL
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment/Kernel
rpm_buildhost: rhel5e-s1.ldev.net
rpm_sourcerpm: cpq_cciss-3.6.28-7.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: cpq_cciss-3.6.28-7.rhel5.x86_64.rpm
checksum_type: sha
description:
  This RPM will install the Hewlett-Packard Company cpq_cciss
  version 3.6.28-7 driver.

  It will install a gzipped tar file, cciss-3.6.28_2011_01_20.tar.gz
  into /opt/hp/storage_drivers.  (The destination directory may be changed
  vi RPM's --prefix or --relocate options, provided you have rpm
  v. 4.0.3 or better.  Additionally, by default, it will install the
  driver object modules under the appropriate /lib/modules subdirectory,
  attempt to create a new initrd image, and modify your LILO or GRUB
  configuration.  If you do no wish to have your LILO or GRUB
  configuration or initrd image modified, you have several options.

  You can install the RPM with the "--noscripts" option, which will
  suppress all actions except for installation of the gzipped tar
  file, so, LILO and GRUB configurations will not be disturbed and a
  new initrd image will not be created.  Then, you can unpack the
  gzipped tar file and install the drivers yourself using the "install"
  script contained within the tar archive.  (Documentation for the
  "install" script is contained in the tar archives as well.  Alternatively
  you could manually copy the cciss.ko files into the appropriate
  /lib/modules subdirectory and manually modify your boot loader's
  configuration if you so choose.)

  Or, there are several environment variables which will suppress
  various aspects of the RPM package's post (un)installation behavior:

  NOINITINSTALL=y
      Suppress making multiple initrd images for all base and errata
      kernels.  Create the initrd image for the currently active
      kernel only.

  SUPPRESSINITRD=y
      Suppress initrd, LILO, and GRUB modifications.

  DRYRUN=y
      Perform only a "dry run" of the post-install steps.  Copying of
      driver object modules, and LILO, GRUB, and initrd configuration
      changes will be "simulated" but not actually performed.  (Note,
      normally a "dry run" is done automatically once prior to
      performing the real installation as a safeguard.  If the "dry run"
      fails, the real installation is not performed.  Setting the "DRYRUN"
      variable simply makes the installation halt after the "dry run"
      even if the "dry run" succeeds.)  Note also that the RPM is still
      considered to be "installed" and "rpm" will refuse to install it
      again, so if you use the "DRYRUN" option, you'll have to uninstall
      the RPM via:

        rpm -e --noscripts cpq_cciss-3.6.28-7

      before reinstalling it without the "DRYRUN" variable set to enable
      LILO, GRUB and initrd modifications to proceed.  Alternately, you
      could manually unpack the gzipped tar file and use the "install"
      script to install the driver object modules, make a new initrd
      image and change your boot loader configuration, or manually
      perform those steps yourself.

  NOTE:  The /etc/modules.conf file will not be updated.  Most of the time,
    this will not be a problem, as the drivers installed by this RPM will
    be updates to previously installed drivers.  If, for whatever reason,
    the RPM installs a driver for which there is not already an entry in
    /etc/modules.conf, then the driver will not be loaded automatically at
    boot time, and it will be necessary to use insmod manually, or modify
    /etc/modules.conf manually.  If /etc/modules.conf must be modified
    manually to add an entry for the driver, then a new initrd image
    must also be created, since mkinitrd uses modules.conf to determine
    what to put into the initrd image.
  NOTE:  The above holds true to SUSE distributions as well, except that
    the file that contains the list of modules to be placed in the initrd
    is /etc/sysconfig/kernel rather than /etc/modules.conf.  Likewise the
    initrd command is "mk_initrd" rather than "mkinitrd".


pkgId: 71e33f56d96d46c7740103841e1e91df1cbf673b
name: cpqacuxe
arch: i386
version: 8.70
epoch: 0
release: 9.0
summary: HP Array Configuration Utility
url: http://www.hp.com/linux
rpm_license: See cpqacuxe.license
rpm_vendor: Hewlett-Packard Company
rpm_group: Applications/System
rpm_buildhost: Prowl
rpm_sourcerpm: cpqacuxe-8.70-9.0.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: cpqacuxe-8.70-9.0.noarch.rpm
checksum_type: sha
description:
  The HP Array Configuration Utility is the web-based disk array
  configuration program for Array Controllers.


pkgId: 749d742e95690d46bedc7dc12874adedf14372d6
name: fibreutils
arch: x86_64
version: 2.5
epoch: 0
release: 4
summary: Provides complimentary programs and scripts for HP supported FC HBAs
url: http://www.hp.com
rpm_license: Proprietary
rpm_vendor: Hewlett-Packard Company
rpm_group: Applications/System
rpm_buildhost: deimos.mro.cpqcorp.net
rpm_sourcerpm: fibreutils-2.5-4.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: fibreutils-2.5-4.x86_64.rpm
checksum_type: sha
description:
  This RPM has the following components:

  * Miscellaneous scripts and programs to compliment HP supported FC drivers:

  lssd
  lssg
  adapter_info
  probe-luns
  hp_rescan
  hp_system_info
  scsi_info
  sysfs_scandisk
  sysfs_scan_rport


pkgId: 9d8be639473950dc86eacba62827acf66dee21a3
name: hp-OpenIPMI
arch: x86_64
version: 8.5.2
epoch: 0
release: 85.rhel5
summary: OpenIPMI +HP
url: http://www.hp.com/go/proliantlinux
rpm_license: GNU Public License
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment/Kernel
rpm_buildhost: rhel5ebuild
rpm_sourcerpm: hp-OpenIPMI-8.5.2-85.rhel5.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hp-OpenIPMI-8.5.2-85.rhel5.x86_64.rpm
checksum_type: sha
description:
  This is an upgraded version of the OpenIPMI device driver that is shipped as
  part of the standard Linux kernel. This release is for Linux 2.6.18+
  kernels. It provides support for PCI Based Base Management Controllers that
  are truly interrupt driven. This package will NOT activate on its own. The
  drivers for this release are placed in /opt/hp/hp-OpenIPMI/bin with a script
  that can be used to launch the IPMI drivers.  The changes made to the IPMI
  drivers are expected to be included in future Linux kernels.

  The hp-OpenIPMI driver can be built for any kernel like any other GPL Open
  Source application.

  You need to install the appropriate kernel-devel package to make use of this.


pkgId: 0125663246a0c47c5da972bfc872db399ede3164
name: hponcfg
arch: noarch
version: 3.1.1
epoch: 0
release: 0
summary: hponcfg - An RILOE II/iLo online configuration utility
url: http://www.hp.com/go/ilo
rpm_license: Proprietary
rpm_vendor: Hewlett-Packard Company
rpm_group: Utilities/System
rpm_buildhost: localhost.localdomain
rpm_sourcerpm: hponcfg-3.1.1-0.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hponcfg-3.1.1-0.noarch.rpm
checksum_type: sha
description:
  Hponcfg is a command line utility that can be used to configure iLO/RILOE II from with in the operating system without requiring a reboot of the server.


pkgId: 732034c460b2a915e66570bd7355d4415fc3fff8
name: hpvca
arch: i386
version: 6.3.0
epoch: 0
release: 8
summary: HP Version Control Agent for Linux
url: http://www.hp.com/linux
rpm_license: Commercial
rpm_vendor: Hewlett Packard Company
rpm_group: System Management/Base
rpm_buildhost: orange
rpm_sourcerpm: hpvca-6.3.0-8.src.rpm
location_href: hpvca-6.3.0-8.linux.rpm
checksum_type: sha
description:
  The version control agent is an agent that collects informations about
  software currently installed on the target machine and updates them to
  their most recent version.


pkgId: c025e2c65fd435c55a0a75bdafc17651750dcfa6
name: kmod-cciss
arch: x86_64
version: 4.6.28
epoch: 0
release: 6.el6
summary: cciss kernel module(s)
url: http://www.hp.com/
rpm_license: GPLv2
rpm_group: System Environment/Kernel
rpm_buildhost: rhel6e-s2
rpm_sourcerpm: cciss-4.6.28-6.el6.src.rpm
location_href: kmod-cciss-4.6.28-6.el6.x86_64.rpm
checksum_type: sha
description:
  This package provides the cciss kernel modules built for
  the Linux kernel 2.6.32-71.el6.x86_64 for the x86_64
  family of processors.


pkgId: 40abb5a99a9d6252e13c402dd13e97e1ade27d82
name: hp-fc-enablement
arch: noarch
version: 1.1
epoch: 0
release: 22
summary: Enablement utilities for HP StorageWorks fibre channel storage arrays
url: http://www.hp.com/linux
rpm_license: GPL
rpm_vendor: Hewlett-Packard Company
rpm_group: Applications/System
rpm_buildhost: hbasw1.mro.cpqcorp.net
rpm_sourcerpm: hp-fc-enablement-1.1-22.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hp-fc-enablement-1.1-22.noarch.rpm
checksum_type: sha
description:
  This package contains utilities and libraries to enable HP Storageworks fibre
  channel array connectivity on Linux.

  Supported Environmental Variables:

  HPFCHBAKITMULTIPATH=y  - Install RPM with Multipathing driver settings
  HPFCHBAKITSINGLEPATH=y - Install RPM with Single path driver settings

  Library Versions:

  libdfc
  	RHEL 5.3	3.0.35
  	RHEL 5.4	3.0.35
  	RHEL 5.5	3.0.52
  	RHEL 5.6	3.0.58
  	SLES 11		3.1.12
  	SLES 11 SP1     4.0.1
  	RHEL 6		4.0.9

  libHBAAPI, libemulexhbaapi
          RHEL 5.3
          RHEL 5.4        5.0.30.1
          RHEL 5.5        5.0.30.1
  	RHEL 5.6	5.1.38.3
  	SLES 10 SP3 	5.0.64.4
          SLES 11      	5.0.64.4
          SLES 11 SP1     5.0.64.4
  	RHEL 6		5.1.7.3

  libemsdm		10
  libqlsdm		6.00 build 12


pkgId: 802886f5a659a973bf91b53494c6b985cd2bba57
name: hpacucli
arch: i386
version: 8.70
epoch: 0
release: 8.0
summary: HP Command Line Array Configuration Utility
url: http://www.hp.com/linux
rpm_license: See hpacucli.license
rpm_vendor: Hewlett-Packard Company
rpm_group: Applications/System
rpm_buildhost: Prowl
rpm_sourcerpm: hpacucli-8.70-8.0.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hpacucli-8.70-8.0.noarch.rpm
checksum_type: sha
description:
  The HP Command Line Array Configuration Utility is the disk
  array configuration program for Array Controllers.


pkgId: d3a3a71544cf8bc6f9ea97a285ea38d012e4f329
name: hp-health
arch: x86_64
version: 8.7.0.22
epoch: 0
release: 11
summary: HP System Health Application and Command Line Utilities
url: http://www.hp.com/go/proliantlinux
rpm_license: 2008 Hewlett-Packard Development Company, L.P.
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment
rpm_buildhost: bld71.sdg.adapps.hp.com
rpm_sourcerpm: hp-health-8.7.0.22-11.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hp-health-8.7.0.22-11.rhel5.x86_64.rpm
checksum_type: sha
description:
  This package contains the System Health Monitor and Advanced Server Reset
  Daemon for all hp Proliant systems with ASM, ILO, & ILO2 embedded management
  asics. Also contained are the command line utilities.


pkgId: 0cc40c84913d8ef19897f54a51ccfdded7e7b560
name: kmod-hpsa
arch: x86_64
version: 2.0.2
epoch: 0
release: 6.el6
summary: hpsa kernel module(s)
url: http://www.kernel.org/
rpm_license: GPLv2
rpm_group: System Environment/Kernel
rpm_buildhost: rhel6e-s2
rpm_sourcerpm: hpsa-2.0.2-6.el6.src.rpm
location_href: kmod-hpsa-2.0.2-6.el6.x86_64.rpm
checksum_type: sha
description:
  This package provides the hpsa kernel modules built for
  the Linux kernel 2.6.32-71.el6.x86_64 for the x86_64
  family of processors.


pkgId: ed00776c72dcb27d5dc40df65990e3bf648d393d
name: hp-ilo
arch: x86_64
version: 8.5.0
epoch: 0
release: 1.rhel5
summary: HP iLO Channel Interface Driver
url: http://www.hp.com/go/proliantlinux
rpm_license: GNU Public License
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment/Kernel
rpm_buildhost: rhel5ebuild
rpm_sourcerpm: hp-ilo-8.5.0-1.rhel5.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hp-ilo-8.5.0-1.rhel5.x86_64.rpm
checksum_type: sha
description:
  This is the Hewlett-Packard integrated Lights-Out (iLO) system management
  controller channel interface device driver. This driver establishes a channel
  from the iLO 2 controller to an application such that the application can
  communicate directly to the iLO 2 controller.


pkgId: a67dd9627173de710b18dfec0479d8d223014a11
name: hp-mlnx-en
arch: src
version: 1.5.5.7
epoch: 0
release: 6
summary: HP NC-Series Mellanox 10GbE Driver for Linux
url: http://www.hp.com
rpm_license: GPL/BSD
rpm_vendor: Helwett-Packard Company
rpm_group: System Environment/Kernel
rpm_buildhost: localhost.localdomain
location_href: hp-mlnx-en-1.5.5.7-6.src.rpm
checksum_type: sha
description:
  This package contains the Linux driver for ConnectX EN Based Network Interface Card with 10GigE Support


pkgId: a1143039b7b47f236d471994921173610c028682
name: hp-netxtreme2
arch: src
version: 6.2.23
epoch: 0
release: 2
summary: HP NC-Series Broadcom 1/10 GbE Multifunction and iSCSI Drivers for Linux
url: http://www.broadcom.com
rpm_license: GPL
rpm_vendor: Broadcom Corporation
rpm_group: System Environment/Base
rpm_buildhost: config
location_href: hp-netxtreme2-6.2.23-2.src.rpm
checksum_type: sha
description:
  "This package contains the Broadcom NetXtreme II iSCSI (bnx2i), 1-Gigabit (bnx2), and 10-Gigabit (bnx2x) ethernet drivers."


pkgId: 72de9c4d683cd51c7c41fa9cd201ea00e84248a9
name: hp-nx_nic
arch: src
version: 4.0.544
epoch: 0
release: 2
summary: HP NC-Series QLogic Driver for Linux
url: http://www.qlogic.com
rpm_license: GPL
rpm_vendor: QLogic, Corporation.
rpm_group: System Environment/Kernel
rpm_buildhost: config
rpm_packager: Hewlett-Packard Company
location_href: hp-nx_nic-4.0.544-2.src.rpm
checksum_type: sha
description:
  "This package contains the Linux driver of the Netxen's Nic"






























  BuildRequires: kernel-source kernel-syms


pkgId: 0fd6eb8cb7a3ca3a6a0d8e4a5d219e26aa960995
name: kmod-mptbase
arch: x86_64
version: 4.00.13.09
epoch: 0
release: 3.el6
summary: mptbase kernel module(s)
url: http://www.lsilogic.com
rpm_license: GPLv2
rpm_group: System Environment/Kernel
rpm_buildhost: rhel6e-s2
rpm_sourcerpm: mptbase-4.00.13.09-3.el6.src.rpm
location_href: kmod-mptbase-4.00.13.09-3.el6.x86_64.rpm
checksum_type: sha
description:
  This package provides the mptbase kernel modules built for
  the Linux kernel 2.6.32-71.el6.x86_64 for the x86_64
  family of processors.


pkgId: 28b31a2b544c0037c20bf8ff2d41a93a932a54be
name: hp-qla4xxx
arch: src
version: 5.01.01.04
epoch: 0
release: 2
summary: QLogic driver for QMH4062 iSCSI HBA.
url: http://www.qlogic.com
rpm_license: GPL
rpm_vendor: QLogic corporation
rpm_group: System Environment/Kernel
rpm_buildhost: oracle.wipro.tcpn.com
rpm_packager: Hewlett-Packard Company
location_href: hp-qla4xxx-5.01.01.04-2.src.rpm
checksum_type: sha
description:
  "This package contains Qlogic driver for QMH4062 iSCSI HBA"


  BuildRequires: kernel-source kernel-syms


pkgId: 224742b6336333a8d5113bfaad803df225a9343f
name: mptlinux
arch: x86_64
version: 4.00.13.09
epoch: 0
release: 5
url: mptlinux..tar.gz
rpm_license: GPL
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment/Kernel
rpm_buildhost: rhel5e-s1.ldev.net
rpm_sourcerpm: mptlinux-4.00.13.09-5.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: mptlinux-4.00.13.09-5.rhel5.x86_64.rpm
checksum_type: sha
summary:
  HP U320 SCSI Adapter, SAS HBA with RAID, SCxxXe and SCxxGe series HBA AMD64/EM64T Driver for Red Hat Enterprise Linux 5 AMD64/EM64T

description:
  This RPM will install the Hewlett-Packard Company mptlinux
  version 4.00.13.09-5 driver.

  It will install a gzipped tar file, mptlinux-4.00.13.09_2011_01_20.tar.gz
  into /opt/lsi/storage_drivers.  (The destination directory may be changed
  vi RPM's --prefix or --relocate options, provided you have rpm
  v. 4.0.3 or better.  Additionally, by default, it will install the
  driver object modules under the appropriate /lib/modules subdirectory,
  attempt to create a new initrd image, and modify your LILO or GRUB
  configuration.  If you do no wish to have your LILO or GRUB
  configuration or initrd image modified, you have several options.

  You can install the RPM with the "--noscripts" option, which will
  suppress all actions except for installation of the gzipped tar
  file, so, LILO and GRUB configurations will not be disturbed and a
  new initrd image will not be created.  Then, you can unpack the
  gzipped tar file and install the drivers yourself using the "install"
  script contained within the tar archive.  (Documentation for the
  "install" script is contained in the tar archives as well.  Alternatively
  you could manually copy the mptbase.ko files into the appropriate
  /lib/modules subdirectory and manually modify your boot loader's
  configuration if you so choose.)

  Or, there are several environment variables which will suppress
  various aspects of the RPM package's post (un)installation behavior:

  NOINITINSTALL=y
      Suppress making multiple initrd images for all base and errata
      kernels.  Create the initrd image for the currently active
      kernel only.

  SUPPRESSINITRD=y
      Suppress initrd, LILO, and GRUB modifications.

  DRYRUN=y
      Perform only a "dry run" of the post-install steps.  Copying of
      driver object modules, and LILO, GRUB, and initrd configuration
      changes will be "simulated" but not actually performed.  (Note,
      normally a "dry run" is done automatically once prior to
      performing the real installation as a safeguard.  If the "dry run"
      fails, the real installation is not performed.  Setting the "DRYRUN"
      variable simply makes the installation halt after the "dry run"
      even if the "dry run" succeeds.)  Note also that the RPM is still
      considered to be "installed" and "rpm" will refuse to install it
      again, so if you use the "DRYRUN" option, you'll have to uninstall
      the RPM via:

        rpm -e --noscripts mptlinux-4.00.13.09-5

      before reinstalling it without the "DRYRUN" variable set to enable
      LILO, GRUB and initrd modifications to proceed.  Alternately, you
      could manually unpack the gzipped tar file and use the "install"
      script to install the driver object modules, make a new initrd
      image and change your boot loader configuration, or manually
      perform those steps yourself.

  NOTE:  The /etc/modules.conf file will not be updated.  Most of the time,
    this will not be a problem, as the drivers installed by this RPM will
    be updates to previously installed drivers.  If, for whatever reason,
    the RPM installs a driver for which there is not already an entry in
    /etc/modules.conf, then the driver will not be loaded automatically at
    boot time, and it will be necessary to use insmod manually, or modify
    /etc/modules.conf manually.  If /etc/modules.conf must be modified
    manually to add an entry for the driver, then a new initrd image
    must also be created, since mkinitrd uses modules.conf to determine
    what to put into the initrd image.
  NOTE:  The above holds true to SUSE distributions as well, except that
    the file that contains the list of modules to be placed in the initrd
    is /etc/sysconfig/kernel rather than /etc/modules.conf.  Likewise the
    initrd command is "mk_initrd" rather than "mkinitrd".


pkgId: a8017579742b5e879bca8b7bedf4413844c8f518
name: hp-smh-templates
arch: noarch
version: 8.7.0.10
epoch: 0
release: 10
summary: hp System Management Homepage Template Package
url: http://www.hp.com/go/proliantlinux
rpm_license: 2008 Hewlett-Packard Development Company, L.P.
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment
rpm_buildhost: bld72.sdg.adapps.hp.com
rpm_sourcerpm: hp-smh-templates-8.7.0.10-10.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hp-smh-templates-8.7.0.10-10.noarch.rpm
checksum_type: sha
description:
  This package contains the System Management Homepage Templates for all
  hp Proliant systems with ASM, ILO, & ILO2 embedded management asics.


pkgId: 17dc99eb84661c36bf10a33b56a844d2918680f6
name: hpahcisr
arch: x86_64
version: 1.2.6
epoch: 0
release: 7
url: http://www.hp.com/linux
rpm_license: HP
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment/Kernel
rpm_buildhost: rhel5e-s1.ldev.net
rpm_sourcerpm: hpahcisr-1.2.6-7.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hpahcisr-1.2.6-7.rhel5.x86_64.rpm
checksum_type: sha
summary:
  HP Smart Array B110i SATA RAID Controller AMD64/EM64T Driver for Red Hat Enterprise Linux 5 AMD64/EM64T

description:
  This RPM will install the Hewlett-Packard Company hpahcisr
  version 1.2.6-7 driver.

  It will install a gzipped tar file, hpahcisr-1.2.6_2011_01_25.tar.gz
  into /opt/hp/storage_drivers.  (The destination directory may be changed
  vi RPM's --prefix or --relocate options, provided you have rpm
  v. 4.0.3 or better.  Additionally, by default, it will install the
  driver object modules under the appropriate /lib/modules subdirectory,
  attempt to create a new initrd image, and modify your LILO or GRUB
  configuration.  If you do no wish to have your LILO or GRUB
  configuration or initrd image modified, you have several options.

  You can install the RPM with the "--noscripts" option, which will
  suppress all actions except for installation of the gzipped tar
  file, so, LILO and GRUB configurations will not be disturbed and a
  new initrd image will not be created.  Then, you can unpack the
  gzipped tar file and install the drivers yourself using the "install"
  script contained within the tar archive.  (Documentation for the
  "install" script is contained in the tar archives as well.  Alternatively
  you could manually copy the hpahcisr.ko files into the appropriate
  /lib/modules subdirectory and manually modify your boot loader's
  configuration if you so choose.)

  Or, there are several environment variables which will suppress
  various aspects of the RPM package's post (un)installation behavior:

  NOINITINSTALL=y
      Suppress making multiple initrd images for all base and errata
      kernels.  Create the initrd image for the currently active
      kernel only.

  SUPPRESSINITRD=y
      Suppress initrd, LILO, and GRUB modifications.

  DRYRUN=y
      Perform only a "dry run" of the post-install steps.  Copying of
      driver object modules, and LILO, GRUB, and initrd configuration
      changes will be "simulated" but not actually performed.  (Note,
      normally a "dry run" is done automatically once prior to
      performing the real installation as a safeguard.  If the "dry run"
      fails, the real installation is not performed.  Setting the "DRYRUN"
      variable simply makes the installation halt after the "dry run"
      even if the "dry run" succeeds.)  Note also that the RPM is still
      considered to be "installed" and "rpm" will refuse to install it
      again, so if you use the "DRYRUN" option, you'll have to uninstall
      the RPM via:

        rpm -e --noscripts hpahcisr-1.2.6-7

      before reinstalling it without the "DRYRUN" variable set to enable
      LILO, GRUB and initrd modifications to proceed.  Alternately, you
      could manually unpack the gzipped tar file and use the "install"
      script to install the driver object modules, make a new initrd
      image and change your boot loader configuration, or manually
      perform those steps yourself.

  NOTE:  The /etc/modules.conf file will not be updated.  Most of the time,
    this will not be a problem, as the drivers installed by this RPM will
    be updates to previously installed drivers.  If, for whatever reason,
    the RPM installs a driver for which there is not already an entry in
    /etc/modules.conf, then the driver will not be loaded automatically at
    boot time, and it will be necessary to use insmod manually, or modify
    /etc/modules.conf manually.  If /etc/modules.conf must be modified
    manually to add an entry for the driver, then a new initrd image
    must also be created, since mkinitrd uses modules.conf to determine
    what to put into the initrd image.
  NOTE:  The above holds true to SUSE distributions as well, except that
    the file that contains the list of modules to be placed in the initrd
    is /etc/sysconfig/kernel rather than /etc/modules.conf.  Likewise the
    initrd command is "mk_initrd" rather than "mkinitrd".


pkgId: 3d9336f995ddc62c71084d6c826785cb64e963dc
name: hp-snmp-agents
arch: x86_64
version: 8.7.0.23
epoch: 0
release: 17
summary: Insight Management Agents(SNMP) for HP ProLiant Systems
url: http://www.hp.com/go/proliantlinux
rpm_license: 2008 Hewlett-Packard Development Company, L.P.
rpm_vendor: Hewlett-Packard Company
rpm_group: System Environment
rpm_buildhost: bld71.sdg.adapps.hp.com
rpm_sourcerpm: hp-snmp-agents-8.7.0.23-17.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hp-snmp-agents-8.7.0.23-17.rhel5.x86_64.rpm
checksum_type: sha
description:
  This package contains the SNMP server, storage, and nic agents for all
  hp Proliant systems with ASM, ILO, & ILO2 embedded management asics.


pkgId: f63116fd960e07bfbf23320cb5af7f749df915c5
name: hpmouse
arch: noarch
version: 1.2.1
epoch: 0
release: 1
summary: hp High Performance ILO2 Mouse X Driver for Linux
url: http://www.hp.com/linux
rpm_license: 2006 Hewlett-Packard Development Company, L.P.
rpm_vendor: Hewlett-Packard Company
rpm_group: X/Application
rpm_buildhost: rhel4build.M73C253-lab.net
rpm_sourcerpm: hpmouse-1.2.1-1.src.rpm
rpm_packager: Hewlett-Packard Company
location_href: hpmouse-1.2.1-1.noarch.rpm
checksum_type: sha
description:
  This package provides Linux/Xwindows support for the High Performance Remote Console mouse for HP Proliant system with the ILO2 management processor. This package is derived from the generic event device input driver for Xfree86/Xorg.


