# changelog

author: Chad Dupuis <Linux_SWdeliverables@external.groups.hp.com> 3.0-1
changelog:
  - Initial version that works with inbox fibre channel drivers only
    (Severity: Critical)
  - Fix grep statement that parses /sys/block for sd devices in lssd
    (Severity: Minor)
  - Add support for five character device names in lssd (Severity: Minor)
  - Fix parsing of sdsd* devices in lssd


author: Chad Dupuis <Linux_SWdeliverables@external.groups.hp.com> 3.1-1
changelog:
  - Added support for Brocade HBAs (Severity: Medium)
  - Added support for getting WWN from MSA2xxx devices in scsi_info


author: Kumar Rahul<Linux_SWdeliverables@external.groups.hp.com> 3.2-5
changelog:
  - Removed installation check for kernel 2.6 and addded Installation check for Rhel5.3 and SLES10 SP3 onwards


author: Shreya Roy Chowdhury<Linux_SWdeliverables@external.groups.hp.com> 3.2-6
changelog:
  - Corrected Link state display information for Qlogic Adapters
  - Added MSA G3 support in Scsi_info.h


author: Emulex Automated Build User
changelog:
  - Initial RPM release
  - Changed version number to 6.4.9.2
  - Added libdfc 4.2.25
  - Added libdfc 3.2.23
  - Added libemulexhbaapi 2.3.b
  - Added libemsdm.so 1.1


author: Emulex Automated Build User
changelog:
  - Changed version number to 6.4.10.2
  - Fixed Bug 144987: Updated release string on RHEL 6
  - Fixed Bug 145311: Improved Requires and Provides tag entries


author: Vijaya Mohan Guvva <vmohan@brocade.com>
changelog:
  - Support for 3.2.0.0 key features - D-Port for 16Gb Adapters (with FOS 7.1),
    Forward Error Correction (with FOS 7.1), FC Credit Recovery (with FOS 7.1) and
    LUN Level IO latency & profile
    For support please contact <support@brocade.com>


author: Rasesh Mody <rmody@brocade.com>
changelog:
  - To download the public key for Brocade signed drivers please visit
    http://www.brocade.com/services-support/drivers-downloads/adapters/Linux.page


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build2:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read Model Description from VPD for ISP2031/ISP8031 adapters
  Introduced: v6.01 build2
  Impact: HW: ISP2031, ISP8031
  	OS: RHEL 5.x, RHEL 6.x, SLES 10.x, SLES 11.x
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Flash read fails through vports for ISP24xx adapters
  Solution: Allow flash read using vport handle for ISP24xx adapters
  Introduced: v6.00 build1
  Impact: HW: ISP24xx
  	OS: RHEL 5.x, RHEL 6.x, SLES 10.x, SLES 11.x
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build3:
  -------------
  Defect/Enhancement: Defect
  Problem: "Encounterd and error loading: /usr/lib/libqlsdm.so" message seen
  	 when adapter not present or driver not loaded
  Solution: Return success for load library
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build4:
  -------------
  Defect/Enhancement: Enhancement
  Problem: N/A
  Solution: Read Board Temperature for ISP2031/IS8031 adapters
  Introduced: v6.01 build4
  Impact: HW: ISP2031, ISP8031
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.01 build5:
  -------------
  Defect/Enhancement: Defect
  Problem: Boot Code expansion region is not flashed during flash update
  Solution: Update Boot Code expnasion region
  Introduced: v4.00 build2
  Impact: HW: ISP2532
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build1:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Added ISP8044 support
  Introduced: v6.02 build1
  Impact: HW: ISP8044
  	OS: All supported Linux flavors
  	Protocol: FCoE

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Added EP2831 support
  Introduced: v6.02 build1
  Impact: HW: EP2831
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Added EP8831 support
  Introduced: v6.02 build1
  Impact: HW: EP8831
  	OS: All supported Linux flavors
  	Protocol: FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build2:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Update Flash versions without reset after flash update
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Retry flash operations after a delay when driver returns BUSY
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Send only Report LUNs command on first LUN found
  Introduced: Day One
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build3:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add SerDes Register read/write support
  Introduced: v6.02 build3
  Impact: HW: ISP2031
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build4:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add 32bit SerDes Register read/write support
  Introduced: v6.02 build4
  Impact: HW: ISP8044
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Allow FCoE context reset for ISP8044 after NVRAM update
  Introduced: v6.02 build4
  Impact: HW: ISP8044
  	OS: All supported Linux flavors
  	Protocol: FC

  Defect/Enhancement: Defect
  Problem: Targets are not visible if Lun 0 is not present
  Solution: Find first valid LUN found and send SCSI comands on it
  Introduced: v6.02 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build7:
  -------------
  Defect/Enhancement: Enhancement 
  Problem: N/A
  Solution: Add ECHO ELS support
  Introduced: v6.02 build7
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE

  Defect/Enhancement: Defect
  Problem: Additional data sent in get statistics
  Solution: Removed invalid code from get statistics
  Introduced: v6.00 build2
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: QLogic Corp <support@qlogic.com>
changelog:
  v6.02 build9:
  -------------
  Defect/Enhancement: Defect
  Problem: Get statistics failing on RHEL5/SLES10
  Solution: Use min data size for statistics required by driver
  Introduced: v6.00 build7
  Impact: HW: All adapters
  	OS: All supported Linux flavors
  	Protocol: FC, FCoE


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.15.1-5
changelog:
  - This driver now supports SRIOV virtual functions
   - This driver now supports HP Ethernet 10Gb 2-port 561FLR-T Adapter
   - This driver now supports HP Ethernet 10Gb 2-port 561T Adapter
   - This driver now supports HP Ethernet 10Gb 1-port P560SFP+ Adapter


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.19.0.46-4
changelog:
  - Fixes kernel panic which occur when sending traffic through vlan with latest stable and cvs
   - Add support for dumping SFF data from the SFP modules
   - Fixes TX hangs on kernels with BQL enabled and ITR>100K/sec
   - Fixes TX hangs which used to occur when Interrupt Throttle Rate(ITR) is disabled with IP forwarding enabled.


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 3.22.0.2-10.rhel6u4
changelog:
  - Added support for Live Error Recovery(LER)
   - Fixes issue of driver getting hang while using netconsole with busy poll


author: Broadcom Build Environment
changelog:
  -FW upgrade not possible when NIC ethernet interface is not up (61314)
  -5719 rx_fcs_errors randomly increment when connected to  Dell power connect 6224 (66991)
  -5719 shows link when cable is NOT plugged in (67200)
  -BCM5720 unknown messages show in lspci on RHEL6.4 beta (67849)
  -Changes in flow control not reflected in OEM specific system stats when using Rhel6.2_x64 (66411)
  -The system fails to wake up from S1 by magic packet. (66759)


author: Broadcom Build Environment
changelog:
  -Add RH5.10 support.
  -Add RH6.5 support.
  -Linux : 5725 failed to enable EEE function. (70347)
  -Unable to wakeup from S3/S4 sleep mode. (70369)
  -Unexpected system shutdown when reload drivers. (70501)
  -tg3 ISO Driver has "Unknown symbol in Module" message on SUSE10.4. (70526)


author: Broadcom Build Environment
changelog:
  -Add RH7.0 support.
  -Poll cpmu link state on APE + ASF enabled devices
  -Expand 4g_overflow_test workaround to skb fragments of any size


author: Linux Storage Driver Team <iss_storagedev@hp.com> 4.6.28-8
changelog:
  * Wed Jan 26 2011 Linux Storage Driver Team <iss_storagedev@hp.com> 4.6.28-7
   - Enhanced command queue handling for heavy I/O loads.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 4.6.28-20
changelog:
  - Bump max_sectors to 8192 for the scsi half of the cciss driver for
     increased tape block size.
   - Fixed reporting of RAID levels in /proc/driver/cciss that use to report
     as unknown.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 4.6.28-22
changelog:
  * Thu Mar 22 2012 Linux Storage Driver Team <iss_storagedev@hp.com> 4.6.28-21
   - Added support for Red Hat Enterprise 6 Update 3.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.6
changelog:
  - ENHANCEMENTS
  - Enhanced the hp-health init script to identify the multi-chassis ProLiant 100 series servers.

  - FIXES
  - Fixed the hpasmcli -s .show dimm. command to prevent isolated occurrences of segmentation fault.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - hpasmlited now supports long IML messages. 
  - Added "show powermeter" command in hpasmcli. It shows the aggregate power consumption of the server. 

  - FIXES
  - Fixed the following issues: 
         1.hpasmcli -s "show server" command showed the L2 and L3 cache information incorrectly on multi processor systems. 
         2.hpasmcli showed incorrect fan numbers on HP ProLiant G6 servers. 
         3.hpasmxld segmentation fault when the HP Integrated Lights Out 2 (iLO 2)  broadcast storm occurs.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.1
changelog:
  - FIXES
  - Fixed hp-health daemon to prevent soft lockups from occurring when the HP Integrated Lights-Out (iLO) controller becomes un  responsive due to network storm.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.2
changelog:
  - FIXES
  - Fixed a problem where if ambient temperature is very low, hpasmlited can incorrectly determine the system is over a tempera  ture threshold and improperly shut the system down.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Added 'SHOW SEL' option in hpasmcli to display the System Event Log (SEL) contents on HP ProLiant 100 series servers. 
  - Updated libcpqci.so, which take advantage of upstream changes to hpilo, to provide better performance to applications, such  as SNMP agents like cmasm2d from hp-snmp-agents. 
  - Added 64-bit hpbootcfg utility.

  - FIXES
  - The Intel processor hyperthreading configuration can be enabled and disabled using hpasmcli on HP ProLiant G6 servers. 
  - Fix POSIX-compliancy issue with initscript. 
  - Avoid sending a SIGKILL to the health daemon, preventing ASRs that may occur on platforms (e.g. DL785) where hp-health shu   tdowns may take an extended amount of time.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Split Advanced Server Recovery functionality into standalone hp-asrd service. For more information, execute 'man hp-asrd'.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - hpasm interface redesigned to use sockets in order to remove timeout related issues caused by message queue interface when   the system is in stress.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - HP Health may skip few lengthy POST error messages due to limitation of IPMI packet.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.6-8
changelog:
  - Corrected memory leak that could occur if hpacucli is run in a loop to
     monitor drives.  
   - Providing more information availability to SMARTMONTOOLS.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.6-10
changelog:
  - Fixed READ_CAPACITY buffer issue to address changes in the ext4
     filesystem for Red Hat Enterprise 6 Update 1.


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.6-13
changelog:
  -  Change driver to ignore rebuild progress in RIS and always start at 0%.
      This will guarantee that even if drive was replaced we will still copy
     all data over.
   - Change driver to ensure that drive write cache is enabled during
     rebuild.  This will help speed up rebuild times significantly, and make
     the behavior more predictable.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - 8.4.0 release (Severity: Medium)
  - ENHANCEMENTS
  - Added support for Integrated Lights-Out 3 (iLO 3)


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - When SNMP community string is configured as other than public in snmpd.conf file, all the webapp data is now populating in HP System Management Homepage (SMH) for Red Hat Enterprise Linux (RHEL) 6.5.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.2
changelog:
  - ENHANCEMENTS
  - Add support for HP ProLiant DL160 G6 Server, HP ProLiant DL180 G6 Server, and HP ProLiant ML150 G6 Server.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.2.5
changelog:
  - ENHANCEMENTS
  - Added support for HP 6GB Serial Attached SCSI (SAS) hard drives. 
  - Added support for Intel ICH10 SATA IDE controller. 
  - Added support for HP NC362i Integrated Dual Port Gigabit Server Adapter. 
  - Added support for NetXen and HP NC-Series Intel e1000e Driver to send the traps. 
  - Added support for multi-board chassis product name and ID. 
  - Updated cmasm2d polling cycle to reduce system workload. 
  - Added the performance agents (cmaperfd).

  - FIXES
  - Fixed an issue where Linux event daemon reported RAID 1 inconsistency events. 
  - Fixed an issue where cmaidad agents send bad request commands to HP P700m Smart Array controller.
  - Fixed an issue with inconsistent data by setting Monitor and performance data buffers to zero before issuing ioctls to HP S  mart Array B110i SATA raid controller. 
  - Fixed an issue where HP Smart Array B110i SATA raid controller was displayed twice as HP Smart Array B110i SATA raid contro  ller and standard IDE controller. 
  - Fixed an issue where incorrect PCA Part number and system ID details sent in trap email. 
  - Fixed an issue where agent crashed when multiple VLANs are created and link up/down events are generated. 
  - Fixed an issue with displaying HP BL p-Class rack data in the System Management HomePage. 
  - Fixed an issue where cmahealthd sends the 6064 trap correctly when correctable memory errors are occurred. 
  - Fixed an issue where System Management Homepage correctly displays the FB DDR3 DIMM type information. 
  - Fixed an issue on HP ProLiant DL320 G6 server where the 6018 trap is not sent correctly when the temperature sensors are ov  erheated. 
  - Fixed the customer issue to use bond IP while sending traps if bondX is chosen as param in cma.conf.  
  - Fixed problem with cmarackd startup.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.3.0
changelog:
  - ENHANCEMENTS
  - Added new 6069 trap upon AC Power loss. Also, the MIB cpqHeFltTolPowerSupplyErrorCondition will show the error information   if the power supply supports error reporting. 
  - The agents now retrieve the Power supply Serial number from Type 39 SMBIOS record if it is present. 
  - The agents now display the negative temperature readings correctly if it is reported by the temperature sensors. 
  - The cmahostd agent now updates the PowerPIC firmware version information in the cpHoFwVerTable. 
  - Updated the SIM event severity to .informational. after the secure erase is completed. 
  - Added support for HP NC362i Integrated Dual Port. 

  - FIXES
  - The cmapeerd agent logs the error .sendto() failed. to cma.log file. 
  - The DIMM type displayed incorrectly on HP ProLiant BL460c G5. 
  - The cmahealthd agent sent the 6036 trap instead of 6035 trap upon fan failure. 
  - The port numbers displayed incorrectly for HP NC532i Dual Port 10GbE Multifunction BL-c Adapter. 
  - The Part Number displayed incorrectly. 
  - The cmanicd crashed after creation of multiple VLAN, disconnect/connect of NIC link. 
  - The System Id displayed incorrectly on the System Management Homepage (SMH). 
  - The blink drive LED feature for HP Smart Array B110i SATA RAID Controller. 
  - The embedded Broadcom SATA controller was not detected on System Management Homepage (SMH). 
  - The multipath status was displayed as "unknown" when a drive failed. 
  - The failed logical drive status displayed incorrectly during an array move, expansion or shrink.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.4.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant  G7 Servers. 
  - Added support for Integrated Lights-Out 3 (iLO 3). 
  - Included a document called  HP_SNMP_Trap_Guide.txt  that  describes the Linux SNMP trap ID messages generated by the agent 
  - Improvements to distribution identification including more consistent output and increased support for community and region  al   distributions. 
  - Added support for Solid State Drives. 
  - Added support for HP StorageWorks 2000sa Modular Storage Array and HP StorageWorks MSA2012sa/ MSA2312sa/  MSA2324sa when co  nnected to HP SC08Ge Host Bus Adapter.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
       .	HP NC542m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP StorageWorks CN1000E Dual Port Converged Network Adapter 
       .	HP NC550m Dual Port Flex-10 10GbE BL-c Adapter 
       .	HP NC551m Dual Port FlexFabric 10Gb Converged Network Adapter 
       .	HP NC551i Dual Port FlexFabric 10Gb Network Adapter 
       .	HP NC362i Integrated Dual Port Gigabit Server Adapter 
       .	HP NC362i Integrated Dual Port BL-c Gigabit Server Adapter 

  - FIXES
  - Modified the 6064 trap implementation to reflect the correct error. 
  - Removed unnecessary information in cmahostd related to bonding driver, in order to improve performance. 
  - Fixed an issue to display the Port number of Physical drives connected to Fiber Channel controller. 
  - Fixed an issue to display Parity group count for RAID 50 and RAID 60 Logical drives. 
  - Modified the script to get the NIC ports details from /sys/class/net. 
  - Fixed an issue where wrong physical address is displayed on SMH, resolution was provided by checking for pcidevice informat  ion instead of subsytem device information.  
  - Fixed an issue where SNMP Alerts/IMA trap were not received by HP SIM. 
  - Fixed an issue where junk characters and misalignment on the console during reboot by adding new line in stop section.  
  - Fixed an issue where Linux SMH shows incorrect bay/port information by adding support for virtual port. 
  - Fixed an issue where cmanicd is filling /var/log/messages via setroublesoot, resolved by modified selinux policy package (H  Pcmanic.pp).


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.5.0
changelog:
  - ENHANCEMENTS
  - Enhanced HP SNMP Agents to retain default permission and ownership of snmpd.conf file.
  - Added support and trap support (link up/down message) for the following HP NC-Series:
         . HP NC551m Dual Port FlexFabric 10Gb Adapter 
         . HP NC551i Dual Port FlexFabric 10Gb Adapter 
         . HP NC365T 4-port Ethernet Server Adapter 
         . HP NC543i 10Gb 2-port  4X Flex-10  QDR Server Adapter 
         . HP NC553m 10Gb 2 port FlexFabric Converged Network  Adapter 
         . HP NC552m 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC553i 10Gb 2 port FlexFabric Converged Network Adapter 
         . HP NC552SFP 2-port 10Gb Server Adapter 
         . HP StorageWorks CN1000Q Dual Port Converged Network Adapter 
         . HP NC525m 10Gb 2 port FlexFabric Converged Network Adapter    

  - FIXES
  - Fixed an issue where unwanted messages getting logged in the cma.log was resolved by removing the fprintf for virtual port. 
  - Fixed an issue where cmanicd leaves trail of zombie lspci processes by modifying lspci usage in port_map.c and redirected o  utput to /dev/null. 
  - Fixed issue not to display driver messages on console for HP B110i Smart Array controller. 
  - Fixed issue on CmaX, which displayed parsing error message on the syslog during agents reboot


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.6.0
changelog:
  - ENHANCEMENTS
  - Added support for the MIBs in the Power Supply Table.
  - Added support for the MIB that specifies the version of Insight Management Agents running on the system.
  - Added support for the HP NC552m 10Gb 2-port FlexFabric Converged Network adapter.

  - FIXES
  - Addressed the tape drive not being displayed on the SMH on few configurations.
  - Displayed the placement correctly for the failed drive after reboot.
  - On Cmax, net-snmp displayed duplicate registration message on the syslog.
  - Modifications are done in code to support the HP NC542m for which PCIID information is the same for both the ports.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 8.7.0
changelog:
  - ENHANCEMENTS
  - Added support to display "N/A" for non reactive thermal sensors instead of "0" value. 
  - Added support to expose firmware version details for FMP, FPGA and cPLD (XNC) firmware. 
  - Added support to report USB key/SD card information. 
  - Provided greater than 2TB physical disk support for smart array and dumb SATA chipsets. 
  - Added new accelerator error code: "Flash Backed Cache Erasing Flash Memory". 
  - Added Physical Disk Temperature support.


author: HP Linux Development <Linux_SWdeliverables@external.groups.hp.com> 10.0.0
changelog:
  - ENHANCEMENTS
  - Added support for HP ProLiant Gen9 Servers.

  - FIXES
  - cmafcad daemon appears to cause segmentation fault.
  - cmastdeqd daemon appears to cause segmentation fault when removing USB key.


author: Rajeshwari <stsd-ailsa@hp.com> 2.2.0-2
changelog:
  - Extension of -w option to include more iLO configuration
  - Fixed an issue where previous version of hponcfg failed to support older iLO Channel Interface drivers


author: Rajeshwari <stsd-ailsa@hp.com> 3.0.0-1
changelog:
  - Support for iLO3, iLO3 identification
  - Fixed an issue related to dynamic linking of hponcfg with libcpqci.so to resolve rdp related issue.


author: Sivakumar A <sivakumar.alagumalai@hp.com> 4.2.0-0
changelog:
  - v4.2.0 is mainly targeted for iLO4 1.30, iLO3 1.60 and iLO2 2.20
  - Created 32 bit and 64 bit RPM Packages to load shared library from hp-helth agent as libcpqci.so (in case of 32bit OS) and libcpqci64.so (in case of 64bit OS)


author: Hewlett-Packard Development Company, L.P. 7.1.0
changelog:
  - Improved trust mode during upgrade
   - Fixed group configuration management during Replicate Agents Settings (Severity: Serious)
   - Improved SMH service management
   - Fixed PHP files to avoid crash (Severity: Serious)
   - Improved webapp configuration files
   - Fixed SMH supporting DLLs to avoid version conflicts (Severity: Serious)
   - updated properties of SMH setup file
   - Updated secured handling of HTTP response
   - Updated Libxml2 to version 2.7.8
   - Updated PHP to version 5.3.10
   - Updated Curl library to version 7.24.0
   - Updated OpenSSL to version 1.0.0h
   - Updated SMH service runs with managed privileges
   - Enable support of Windows 2008 R2 Sp1 - Server Core
   - Enable support of Windows Server 8 (Beta)
   - Enable support of Windows Multipoint Server 2011 for x64
   - Enable support of Microsoft Windows Small Business Server 2011 for x64, Standard and Essentials
   - Updated usability of IP restrictions with SMH Command Line Interface
   - Updated information provided on webapp availability & loading statistics
   - Added support for Firefox 9.0 & 10.0

   * Thu Oct 13 2011 Hewlett-Packard Development Company, L.P. 7.0.0
   - Fixed SMH improperly displayed an invalid certificate warning when restarted, even on a fresh install. (Severity: Medium)
   - Added a command line option to modify the local and state information in the SMH PKCS (Public-Key Cryptography Standards) data
   - Added secured handling of HTTP request and response
   - Added support for Firefox 6.0, 7.0, 8.0 and Internet Explorer 9.0
   - clarified the log messages
   - Improved handling of command Line Interface options
   - Improved handling of IP fields
   - Improved handling of memory resources
   - Improved handling of revoked trusted certificate
   - Improved handling of SMH configuration file and settings
   - Improved CLI options, for easier management of SMH configurations
   - Updated the HTTP links
   - Updated Apache to version 2.2.21
   - Updated Curl library to version 7.21.7
   - Updated OpenSSL to version 1.0.0e
   - Updated PHP to version 5.3.8


author: Hewlett-Packard Development Company, L.P. 7.1.1
changelog:
  - On some Non-English Windows Operating Systems, user is not able to login into SMH 7.1.0. This version will solve this problem (Severity: Critical)
   - Improved security features of PHP (Severity: Critical)


author: Hewlett-Packard Development Company, L.P. 7.1.2
changelog:
  - Improved security features
   - Improved logging on few Operating Systems
   - Enable support of Red Hat Client 5.8
   - Updated OpenSSL to version 1.0.1c (Severity: Critical)
   - Updated PHP to version 5.3.14 (Severity: Critical)
   - Improvement in RPM packaging


author: Hewlett-Packard Development Company, L.P. 7.2.0
changelog:
  - Updated Apache to version 2.4.3 (Severity: Critical)
   - Improved logging on few Operating Systems
   - Improvement in Certificate management
   - Added support for Firefox ESR 17.0 and Internet Explorer 10.0
   - Enable support for Transport Layer Security (TLS) protocol 1.1 / 1.2
   - Improved User Interface for Online Help
   - Improved CLI options for easier management of SMH configurations
   - Secured handling of HTTP communication


author: Hewlett-Packard Development Company, L.P. 7.2.2
changelog:
  - Updated PHP to version 5.4.11
   - Updated Curl to version 7.28.1
   - Enable support of SUSE Linux Enterprise Server 11 SP3


author: Hewlett-Packard Development Company, L.P. 7.3.0
changelog:
  - Enabled Simplified Chinese localization
   - Updated Apache to version 2.4.6
   - Updated Libxml2 to version 2.9.1
   - Updated OpenSSL to version 1.0.1e
   - Updated Curl to version 7.32.0
   - Updated PHP to version 5.5.2
   - Packaged zlib 1.2.8 with SMH


author: Hewlett-Packard Development Company, L.P. 7.3.1
changelog:
  - Enabled support of 2048 & 4096 bit certificate for Single Sign-On (SSO)
   - Enabled FQDN (Fully Qualified Domain Name) for the CN (Common Name) field in the self-signed certificate & CSR (Certificate Signing Request)


author: Ver:2.0-23.0
changelog:
  - Please refer to online documentation by searching for the 
  "HP Array Configuration Utility CLI" using the search box on
  http://www.hp.com. Then select the Download software link,
  select your operation system. Under the Enhancements tab is a 
  description of the changes. (Severity: Low)


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.4.4-5
changelog:
  - Initial package
   - Fixed panics when the driver is loaded on 8257x and 80003es2lan non-copper devices (Severity: Critical)
   - Fixed slow performance experienced by ICH9/ICH10 interfaces with 9K Jumbo
   - Fixed EEE in Sx power consumption higher than LPLU


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.5.7-4
changelog:
  - Fixed panic with Rx traffic while interface is going down
   - Add support for I218 "Ultra-Low Power" (ULP) mode enabled in S3/4 and in S0 when Runtime Power Management (RPM) is enabled
   - Fixed multiple Runtime Power Management (RPM) issues
   - Fixed a Tx hang inssue at 100Half on I218
   - Fixed numeric overflow in phc settime method
   - Fixed issue of AMT connection drops after driver unload if large MTU configured
   - Fixed low throughput issues and high CRC error count issues using 4K jumbo MTU
   - Fixed vlan support issues for kernels 3.10 and above


author: scm_be <scm_be@emulex.com> 10.2.323.6
changelog:
  - Added RHEL 7 support
  - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.0.7-10.rhel6u4
changelog:
  * Wed Nov 27 2013 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 5.0.7-4
   - Fixed igb compilation issues with upstream 3.10 Linux Kernel
   - Changed how driver update rx packet stats, to include additional packet types
   - Add support for freeing q_vectors via RCU


author: scm_be <scm_be@emulex.com> 10.2.323.6
changelog:
  - Added RHEL 7 support
  - Added support for OCe14000 based adapters: 650FLB, 650M, 556FLR-SFP, CN1200E
  - Provides mechanism to increase queue pairs on older distributions
  - Changed QoS handling for HP SR-IOV:  Update VF TX rate


author: HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.12.0.38-10.rhel6u4
changelog:
  * Wed Nov 27 2013 HP Linux SW Deliverables <Linux_SWdeliverables@external.groups.hp.com> 2.12.0.38-4
   - Fixed the issue of SLES 11 SP2 VM guest unable to change hardware offload settings for VF interface
   - Correct support for NDO features in VF
   - Correct build if HAVE_LVAN_RX_REGISTER not defined
   - Fixed the driver hang issue when rmmod is done on RHEL 5.9 Guest opearting systems
   - Support for bus poll sockets


author: QLogic Corp <support@qlogic.com> 4.0.596-1
changelog:
  The following features/fixes have been made to the QLogic Linux NIC driver.

  Version 4.0.596 (HP NCDE 11.00)
  - Included 4.0.596 firmware

  Version 4.0.595.5

  - P3 driver nx_nic-4.0.595.3-140415-HP.tgz is not blacklisting netxen_nic driver on RHEL7 RC2 [ER0000000132968]
  Defect/Enhancement: Defect
  Problem : netxen_nic driver is part of initramfs on newer distros like RHEL7.0 and SLES12.
  source installation script was not taking care of this scenario.
  Change : Added a logic to rebuild initramfs to blacklist netxen_nic in initramfs
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: RHEL7.0 and SLES12
  FW: N/A
  OtherSW: N/A

  Version 4.0.595.4

  - nx_nic:system hangs/crash while loading nx_nic driver on SLES12 Beta releases.[ER0000000132875]
  Defect/Enhancement: Defect
  Problem : Kernel panics as soon as nx_nic driver loads because of not using latest netdev notifier API.
  Change : Use proper netdev notifier API while handling netdev events.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - nx_nic: nx_xport-src-install.sh script failed to update "allow_unsupported_modules" file on SLES12.[ER0000000132874]
  Defect/Enhancement: Defect
  Problem : nx_xport driver fails to load due to unsupported module error
  Change : Load driver using "modprobe nx_xport --allow-unsupported-modules" in the script if module load fails.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.595.3

  - NC524SFP: nx_nic: nx_handle_lro_response: Response: 135, Firmware failed to add LRO, getting while running traffic. [ER0000000132205]
  Defect/Enhancement: Defect
  Problem : Driver is flooding a log when FW sends a response for failure of add LRO request.
  Change : Removed that log and added a statistics counter
  Introduced : 4.0.590.8
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.595.2

  - HP1100:P3-RH7:./nx_nic-src-install.sh -r option not exiting properly, need makefile changes.[ER0000000131921]
  Defect/Enhancement: Defect
  Problem : While uninstalling nx_nic driver using source packaged script, uninstallation stucks
  Change : Changed Makefile to blacklist netxen_nic/nx_xport driver
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.595.1

  - Add support for Redhat 7 distribution in nx_nic driver.[ER0000000131826]
  Defect/Enhancement: Enhancement
  Problem : Driver doesn't support for Redhat 7 distribution
  Change : Added support in nx_nic driver for Redhat 7
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 4.0.595 (HP NCDE 10.90)

  - Included 4.0.595 firmware

  Version 4.0.594

  - Included 4.0.594 firmware

  - Firmware dump file size may not match with actual fw dump size
  collected by the driver [ER0000000112166]
  Defect/Enhancement: Defect
  Problem : Driver is not using proper API to copy minidump to user-space, so size
  may not be correct if collected minidump size is not multiple of 4096
  Change : Used proper API to copy collected minidump to user space
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.593 (HP NCDE 10.85)

  - Included 4.0.593 firmware

  - Add support in driver/nxudiag/scripts to read ULA bit from firmware [ER0000000110171]
  Defect/Enhancement: Enhancement
  Problem : Read ULA bit info from firmware and log message accordingly.
  Change : Added a message to display ULA information.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.591

  - Included 4.0.591 firmware

  Version 4.0.590.10

  - Included 4.0.590 firmware

  - P3: lspci command failed due to nx_nic script is creating duplicate entries [ER0000000109170]
  Defect/Enhancement: Defect
  Problem : Issue: lspci command is not working after installing
  nx_nic driver using script :nx_nic-src-install.sh -i
  Change : Removed the logic of patching pci.ids file for P3 products.
  Supported distros already have P3 product entries in pci.ids file.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - blacklisting of netxen_nic is not working on SLES11SP3 [ER0000000108481]
  Defect/Enhancement: Defect
  Problem : blacklisting script considers the default path of netxen_nic
  driver as drivers/net/netxen/netxen_nic. but SLES11SP3 path
  for netxen_nic is drivers/net/ethernet/qlogic/netxen/.
  Change : Changed the logic to determine netxen_nic driver.
  Instead of hard coded path, used modinfo to determine
  presence of netxen_nic driver.
  Introduced : When SLES11SP3 ditro support was added
  Impact : HW: All supported Hardware
  OS: SLES11SP3
  FW: N/A
  OtherSW: N/A

  - nx_nic:ERROR: Failed to query MDI-X status in /var/log/messages [ER0000000109108]
  Defect/Enhancement: Defect
  Problem : Driver was trying to issue command, based on port type, which was meant
  to be only for 1G adapter, to 10G adapter. Hence command was failing.
  Change : Driver was declaring port type of twinax cable as twisted pair(PORT_TP).
  Changed the driver code to declare port type as direct attach copper (PORT_DA)
  Introduced : 4.0.589
  Impact : HW: All supported 10G adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.9

  - Included 4.0.590 firmware

  - OS is getting hung for 522SFP on Service Network Restart in RHEL6.4 x64bit OS
  [ER0000000108990]
  Defect/Enhancement: Defect
  Problem : OS is getting hung for 522SFP on Service Network Restart in
  RHEL6.4 x64bit OS. This is because driver is trying to unmap
  already unmapped dma memory. Issue is seen only when iommu is ON.
  Change : Cleared a variable after first round of unmapping. This prevents
  repeated unmapping.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 4.0.590.8

  - Included 4.0.590 firmware

  - The contents of "/etc/snmp/snmpd.conf" become empty after
  "hp-nx_nic-tools-4.0.590-2.x86_64" is uninstalled.[ER0000000108367]
  Defect/Enhancement: Defect
  Problem : While removing hp-nx_nic-tools rpm, nx_nic_tools_preun.sh
  overwrites "etc/snmp/snmpd.conf" with blank file because
  a variable is not defined.
  Change : Defined a variable in nx_nic_tools_preun.sh which was causing
  an empty file.
  Introduced : 4.0.589
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - P3 nx_nic: handle LRO response for opcode
  NX_NIC_C2H_OPCODE_LRO_ADD_FAILURE_RESPONSE. [ER0000000107243]
  Defect/Enhancement: Enhancement
  Problem : Function to handle LRO_DELETE_RESPONSE does not have print to
  indicate the opcode of response. As this function is being called
  to handle two opcodes, there should be a print to indicate so.
  Change : Added comments and debug print to indicate the opcode
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.7

  - Included 4.0.590 firmware

  - nx_nic: default rx ring parameters are not same in 64-bit and
  32-bit kernel [ER0000000106524]
  Defect/Enhancement: Defect
  Problem : Different default rx ring parameters are seen on 64-bit and
  32-bit OS. This issue is seen on RHEL6.4/5.9 and UEK5/6-400
  kernels, where CONFIG_XEN is enabled for non-xen 32bit kernel
  flavor.
  Change : Removed a check for XEN and 32bit kernel from driver while
  setting default ring paramter values.
  Introduced : 4.0.590.6
  Impact : HW: All supported Hardware
  OS: RHEL6.4/5.9, UEK5/6-400
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.6.1 (HP NCDE 10.80)

  - Included 4.0.590 firmware

  - OS is getting hung for 522SFP on Service Network Restart in RHEL6.4 x64bit OS
  [ER0000000108990]
  Defect/Enhancement: Defect
  Problem : OS is getting hung for 522SFP on Service Network Restart in
  RHEL6.4 x64bit OS. This is because driver is trying to unmap
  already unmapped dma memory. Issue is seen only when iommu is ON.
  Change : Cleared a variable after first round of unmapping. This prevents
  repeated unmapping.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.6

  - Included 4.0.590 firmware

  - nx_nic: rx ring parameters are not getting default values [ER0000000105965]
  Defect/Enhancement: Defect
  Problem : On some distros like RHEL6.4, default ring parameter values for
  10G adapter are not shown as per expectation.
  Change : Fixed a bug in driver which was causing default ring parameter
  values to be set to unexpected values.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: RHEL6.4
  FW: N/A
  OtherSW: N/A

  - Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
  Defect/Enhancement: Defect
  Problem : On RHEL6.4, user cannot enable/disable LRO through ethtool
  Change : Fixed a bug in the driver which was preventing LRO settings
  through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: RHEL6.4
  FW: N/A
  OtherSW: N/A

  - UEK-R2: nx_nic-4.0.590.5 driver installation failed using installer scripts
  [ER0000000105185]
  Defect/Enhancement: Defect
  Problem : On UEK-R2 distro, nx_nic-src-install.sh and nx_xport-src-install.sh
  scripts fail to build drivers.
  Change : Added a logic in script to determine UEK-R2 distro specific string.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: UEK-R2
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.5

  - Included 4.0.590 firmware

  - P3:hp-nx_nic-4.0.590.3 driver installation is displaying driver code on screen [ER0000000104276]
  Defect/Enhancement: Defect
  Problem : While installing nx_nic driver using nx_nic-src-install.sh script,
  installation is displaying script code on screen.
  Change : Suppressed Makefile output so that script code is not displayed on screen.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.4

  - Included 4.0.590 firmware

  - SLES11 SP3 support for nx_nic. [ER0000000104141]
  Defect/Enhancement: Enhancement
  Problem : nx_nic driver does not support SLES11SP3 kernel
  Change : Added support of SLES11 SP3 for nx_nic driver
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: SLES11 SP3
  FW: N/A
  OtherSW: N/A

  Version 4.0.590.3

  - Included 4.0.590 firmware

  - Customer Issue: HP Action Id: 2075220 - Intermittent freeze on DL580 G7 with NC375T RHEL 6.1 X86_64
  [ER0000000100887]
  Defect/Enhancement: Defect
  Problem : There was a spin lock issue in transmit path where at one condition
  We go in failure path and we do spin_unlock which has not been acquired
  Change : Changed the code not to do spin_unlock
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Avoid mix mode interrupts [ER0000000098696]
  Defect/Enhancement: Enhancement
  Problem : P3 hardware does not support mix mode interrupts. All the pci functions
  should be present in either legacy mode or msi/msix mode.
  Change : Changed the logic that if one pci function doesn't gets msi mode then it will
  not go into legacy mode. It will gracefully fail.
  The only way driver can go in legacy mode is using module parameter.
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 4.0.590.2 (HP NCDE 10.70)

  - Included 4.0.590 firmware

  - P3 n/w interface status is not consistent across firmware updates when more
  than 2 P3 cards are connected [ER0000000100702]
  Defect/Enhancement: Defect
  Problem : If the system has multiple QLogic P3 adapters, all but the last interface
  is UP and don't have IP address assigned, and last interface is down, script
  marks all the interfaces DOWN after the flash update.
  Change : Changed a logic to mark interface as UP or DOWN during the process of marking
  interface status
  Introduced: 4.0.590.1
  Impact : HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: nxflash tool

  Version 4.0.590.1

  - Included 4.0.590 firmware

  - Flashing QLogic PCIe NIC NC522SFP using SC brings down its n/w interfaces [ER0000000098927]
  Defect/Enhancement: Defect
  Problem : nxflash script fails to restore interfaces, which were UP and did not have any
  IP address assigned, after flashing of card with firmware.
  Change : Added a logic in nxflash to restore interfaces.
  Introduced: Day one
  Impact : HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: nxflash tool

  Version 4.0.590

  - Included 4.0.590 firmware

  - nx_xport is not getting blacklisted [ER0000000097826]
  Defect/Enhancement: Defect
  Problem : nx_xport is not getting blacklisted when installed through driver
  source or nx_xport-src-install.sh script.
  Change : Added a support to blacklist nx_xport in Makefile of nx_nic.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.589.2

  - Included 4.0.589 firmware

  - Unable to build nx_xport through driver source using “make driver” command.
  [ER0000000097350]

  Defect/Enhancement: Defect
  Problem : On SLES10 SP4 "make driver" command was failing for nx_xport driver
  Change : Removed a bug from Makefile for nx_xport.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: SLES10SP4
  FW: N/A
  OtherSW: N/A

  - Unable to install nx_nic through “make install” command.[ER0000000097220]

  Defect/Enhancement: Defect
  Problem : "make install" command failing to blacklist netxen_nic driver.
  Change : Added a support to blacklist netxen_nic driver in nx_nic Makefile.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - netxen_nic is not getting blacklisted when installed through nx_nic-src-install.sh
  [ER0000000097353]

  Defect/Enhancement: Defect
  Problem : nx_nic-src-install.sh did not have support to blacklist netxen_nic
  hence netxen_nic driver was getting reloaded after reboot.
  Change : added a support to blacklist netxen_nic driver in nx_nic-src-install.sh
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - nx_nic-src-install.sh failing to unload nx_nic [ER0000000097260]

  Defect/Enhancement: Defect
  Problem : "./nx_nic-src-install.sh -r" command failing to unload nx_nic driver
  Change : removed a bug from drv_uninstall() function.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Debug prints are showing when installing nx_xport through nx_xport-src-install.sh
  [ER0000000097232]

  Defect/Enhancement: Defect
  Problem : "nx_xport-src-install.sh -i" command executes with debug prints.
  Change : removed set -x command from the nx_xport-src-install.sh.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 4.0.589.1

  - Included 4.0.589 firmware

  - RPM spec file naming convention broken in nx_nic 4.0.589 package. [ER0000000097075]

  Defect/Enhancement: Defect
  Problem : nx_nic 4.0.589 package contains rpm spec file with name
  "hp-nx_nic-4.0.589.spec". Expected spec file name is "hp-nx_nic.spec"
  Change : Changed the packaging automation script to provide expected spec file name.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Executable permission is not assigned to "nx_nic-src-install.sh" script provided
  in src folder [ER0000000096870]

  Defect/Enhancement: Defect
  Problem : "nx_nic-src-install.sh" script is provided without executable permission.
  Change : Added executable permission for "nx_nic-src-install.sh" script file.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Unable to build & install driver from "nx_nic-src-install.sh –-install"
  script provided in src folder [ER0000000096868]

  Defect/Enhancement: Defect
  Problem : usage message for install script provided with nx_nic source tar
  gives wrong information for "nx_nic-src-install.sh -i, –-install" option.
  Message says "Builds the driver source and installs the module file",
  whereas "nx_nic-src-install.sh -i, –-install" option only installs the
  module file.
  Change : Changed the usage description for "nx_nic-src-install.sh -i, –-install" option
  to "Installs the module file"
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - netxen_nic is not getting black-listed after installtion of nx_nic [ER0000000096865]

  Defect/Enhancement: Defect
  Problem : netxen_nic inbox driver is not getting blacklisted after installation
  of nx_nic rpm
  Change : Added the change in spec file to blacklist netxen_nic post installation
  of nx_nic rpm.
  Introduced: 4.0.589
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: nx_xport, netxen_nic


  Version 4.0.589

  - Included 4.0.589 firmware

  - Log driver version during module load [ER0000000093769]

  Defect/Enhancement: Enhancement
  Problem : Driver version was not getting logged along with firmware version
  in demsg and /var/log/messages
  Change : Log the driver version along with the firmware version
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - LRO functionaly works fine but ethtool -k shows "off" [ER0000000092755]

  Defect/Enhancement: Defect
  Problem : ethtool -k <interface_name> shows incorrect LRO status
  Change : Driver has been modified to return the correct LRO status to ethtool
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All Linux flavors which support LRO status info using ethtool
  FW: N/A
  OtherSW: N/A

  - ethtool port info for MDI-X [ER0000000092753]

  Defect/Enhancement: Defect
  Problem : ethtool <interface_name> on copper wire interface shows MDI-X
  status as unknown
  Change : Added support to return, MDI-X status of copper wire interface
  read from firmware, to ethtool.
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All Linux flavors which support MDI-X status info using ethtool
  FW: N/A
  OtherSW: N/A

  Version 4.0.588: (HP NCDE 10.65)

  - Included 4.0.588 firmware

  - Disabling Minidump by default in nx_nic
  [ER0000000092733]
  - Minidump related changes in nx_nic driver
  [ER0000000092146]
  - Support for ql_dump.sh to configure and extract minidump
  [ER0000000092362]
  - man page for nx_nic is not updated for installation procedure of nx_xport
  [ER0000000090593]
  - Cannot set rx/tx ring paramter information using ethtool
  [ER0000000090538]
  - No instruction for installing nx_xport driver in README.txt on 4.0.584
  [ER0000000090658]

  Version 4.0.585: (HP NCDE 10.60)

  - Included 4.0.585 firmware


  Version 4.0.584

  - Included 4.0.584 firmware

  - QXCR1001193749: Incorrect Speed & Duplex value for unconnected
  port of NC522SFP in RHEL5.7x32OS [ER0000000090192]
  - QXCR1001194440: nx_nic driver does not return values for
  "ethtool -S" command on SLES11 SP2 x32 [ER0000000089891]
  - Need capability to pass nx_xport.ko location as a command line
  parameter to nxflash [ER0000000089190]
  - nx_nic driver does not execute the test using "ethtool -t"
  command on SLES11 SP2 x32 [ER0000000089985]
  - Unable to set lro on. [ER0000000089985]
  - nx_nic: Makefile change to build nx_nic tar file.
  [ER0000000089908]
  - nx_nic error logging on fw hang [ER0000000089981]
  - nxflash modifications to prevent netxen_nic autoload
  [ER0000000089021]
  - Incorrect hardware address is shown on ethtool -P option
  on SLES11 SP2 x32 [ER0000000089983]
  - nxflash non interactive mode fails [ER0000000090342]
  - Change in the install location for nx_nic.ko [ER0000000090470]


  Version 4.0.583

  - Included 4.0.583 firmware


  Version 4.0.582

  - Included 4.0.582 firmware

  - QXCR1001168948: Customer Issue - using NC375T does
  not install correctly in RedHat 4 Update [ER0000000086591]
  - hp-nx_nic fails to build on SLES 11 SP 2 OS. [ER0000000088043]
  - Enhancements to nx_nic firmware reset functionality
  [ER0000000088097]


  Version 4.0.581

  - Included 4.0.581 firmware


  Version 4.0.580:

  - Included 4.0.580 firmware

  - Add P3 Minidump feature support in Linux nx_nic driver
  [ER0000000086509]
  - QXCR1001037436: Need interface/utility to provide the miniDIMM
  information [ER0000000072334]
  - No fields for "lso_pkts" and lso_frames" in ethtool
  -S ethX output [ER0000000085392]


  Version 4.0.579: (HP NCDE 10.45)

  - Included 4.0.579 firmware

  - QXCR1001139669: Customer Issue-Can't set MTU value over 1501
  (or above) on NC375T [ER0000000083572]


  Version 4.0.556: (HP NCDE 10.41)

  - Included 4.0.556 firmware

  - Driver requires a minimum of 4.0.505 firmware to be flashed
  in the adapter. If the flashed firmware version is lower
  than 4.0.505, driver will not load, and the following message
  will be logged.

  "Minimum fw version supported is 4.0.505. Please update
  firmware on flash"

  It's recommended to update the firmware version on flash to the
  latest available on seeing the above message.

  If the flashed firmware version is lower than 4.0.554,
  and firmware included in the file is equal to or higher
  than 4.0.554, driver will use the firmware from flash,
  and the following message will be logged.

  "Incompatibility detected between driver and firmware version
  on flash This configuration is not recommended
  Please update the firmware on flash immediately"

  It's recommended to update the firmware version on flash to the
  latest available on seeing the above message.


  Version 4.0.551: (HP NCDE 10.40)

  - QXCR1001062546: Blacklisting netxen_nic does not work well
  on SLES10 [ER0000000082378]


author: QLogic Corp <support@qlogic.com> 8.07.00.08.06.0-k-1
changelog:
  - 8.07.00.08.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Add MBC option for fast SFP data access.
  - Remove ISP8044 from pci table.
  - Revert "Change default capture to firmware defined capture mask".
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Remove mapped vp index iterator macro dead code.
  RHEL5:
  - Add shutdown callback handler.

  - 8.07.00.07.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Check the QLA8044_CRB_DRV_ACTIVE_INDEX register when we are not the owner of the reset.
  - Reduce the time we wait for a command to complete during SCSI error handling.
  - Delay driver unload if there is any pending activity going on.
  - Don't check for firmware hung during the reset context for ISP82xx.
  - Fix beacon blink logic for ISP26xx/83xx.
  - Add mention of RHEL7 and SLES11.3 in README.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - ISP27xx firmware dump template spec updates (including T274).
  - ISP27xx queue index shadow registers.
  - Fix ISPFx00 not displaying the correct FW version after FW update through sysfs Interface.
  RHEL7, RHEL6, SLES11, UEK, UEK2, XS:
  - Clear loop_id for ports that are marked lost during fabric scanning.
  - Fixup looking for a space in the outstanding_cmds array in qla2x00_alloc_iocbs().

  - 8.07.00.06.xx.y-k
  RHEL7, RHEL6, SLES11, SLES10, UEK, UEK2, XS:
  - Avoid escalating the SCSI error handler if the command is not found in firmware.
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, UEK2, XS:
  - Change default capture to firmware defined capture mask.
  RHEL7, RHEL6, RHEL5, SLES11, UEK, UEK2, XS:
  - Adjust adapter reset routine to the changes in firmware specification for ISPFx00.

  - 8.07.00.05.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, SLES10, UEK, XS:
  - Add #if around printk_ratelimit to fix build issue on RHEL 6.
  - Add 'sparse_endian' command line option to build.sh
  - Fix build errors related to invalid print fields on some architectures.
  - Poll during initialization for ISP25xx and ISP83xx.
  - Add target mode definitions [SLES 11 SP3 specific].
  - ISP8044 ipmdio bus timeout improvement.
  - Remove configure VFs mailbox command call.
  - Use proper log message for flash lock failed error for ISP82XX.
  - IOCB data should be copied to I/O mem using memcpy_toio.

  - 8.07.00.04.xx.y-k
  RHEL7, RHEL6, RHEL5, SLES11, UEK, Citrix:
  - Add sparse command line option.
  - Add 8044 serdes bsg interface.
  - Correction to 27xx template entry types 256 and 258.
  - Track the process when the ROM_LOCK failure happens.
  - Introduce fw_dump_flag to track fw dump progress.
  - Remove unnecessary code from qlafx00_intr_handler.
  - Enable fw_dump_size for 8044.
  - Update entry type 270 to match spec update for 27xx.
  - Change copyright year to 2014 in all the source files.
  - Remove unnecessary delays from fw dump code path.
  - Use jiffies instead of time.
  - Decrease pci access for response queue processing for ISPFX00.
  - Use proper log message for flash lock failed error.
  - Include <delay.h> file for msleep declaration in qla_nx2.c.
  - Correct the port no assignment for ISP82XX.
  RHEL5:
  - Add 24xx/25xx/81xx/83xx FC and FCoE Firmware 7.02.00.
  - IOCB data should be copied to I/O memory using memcpy_toio().
  - Use the physical port for all loopback operations.

  - 8.07.00.03.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Wait for reset completion without lock for ISPFX00.
  - Add pci device id 0x2271.
  - Add pci device id 0x2071.
  - Fix Task Management command asynchronous handling
  - Add IOCB Abort command asynchronous handling
  - Do not schedule reset when one is already active when receiving an invalid status handle.
  - Add and use 32Gbps FC-GS definitions.
  - Correct operations for ISP27xx template types 270 and 271.
  - Fix sparse warnings in qla_mr.c
  - Allow 83XX and 27XX both to write req_q_out register.
  - Correct 83xx/27xx mislogic in setting out_mb in qla25xx_init_req_que().
  - Check for peg alive counter and clear any outstanding mailbox command.
  - Log when device state is moved to failed state.
  - Issue abort command for outstanding commands during cleanup when only firmware is alive.
  - Support of new Helga minidump opcodes QLA8044_RDDFE(38), QLA8044_RDMDIO(39),QLA8044_POLLWR(40).
  - Allow the next firmware dump if the previous dump capture fails for ISP8044.
  - Add build.sh commandline option help/description to README file.

  - 8.07.00.02.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Allow ISP83xx and ISP27xx to use read/write remote register.

  - 8.07.00.01.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, UEK2/R3, Citrix:
  - Remove pci device id ISP2071.

  - 8.07.00.00.xx.y-k
  RHEL6, SLES11, RHEL5, UEK, Citrix:
  - Add support for ISP2701.
  - Remove Marker type IOCB logic for ISPFX00.
  - Add changes in the IOCB structures to adjust driver source codes to ISPFX00 firmware spec
  - Add BE support for ISPFX00.
  - Avoid poisoining in the response queue for ISPFX00.
  - Simplyfy the ISPFX00 interrupt handler code for ISPFX00.
  - Optimize the response queue processing for ISPFX00.
  RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix:
  - Remove ISP_ABORT_NEEDED and ISP_ABORT_RETRY checks from watchdog function for Helga.
  - Read capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  UEK2/R3:
  - Clear drv active before removing the host.
  - Wait for reset completion without lock for ISPFX00.

  - 8.06.00.13.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Add mutex around optrom calls to serialize accesses.
  - Add handling for boot indication progress AENs
  - Replace constant value for IOCTL IOCB abort execution status with a macro.
  - Enable the Flash Access Control (FAC) mailbox command.
  - Use proper message for Non owner reset ACK Timeout.
  - Remove init control block related dead code for ISPFX00.
  - Select correct request queue for error type IOCB for ISPFX00.
  - The file README.qla2xxx does not mention SLES11.3 (or later).
  - Fix warning reported by smatch.
  - Properly handle 32 bit mailbox register for ISPFX00.
  - Set host can_queue value based on available resources.

  - 8.06.00.12.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Assign the correct pointer to the sp->ctx in abort context for ISPFx00 (BZ8627).
  - Obtain adapter model description from vpd (SLES10 only) (ER105124).
  - Use scnprintf() instead of snprintf() in the sysfs handlers.
  - Only complete dcbx_comp and lb_portup_comp for virtual port index 0.
  - Reset nic_core_reset_owner on moving from COLD to READY for ISP8044 (ER111788).
  - Revert "qla2xxx: Remove entry in outstanding_cmds array if we fail to abort a request."
  - QLAFX00 Replace a constant with a macro definition for host->canqueue assigmnment.

  - 8.06.00.11.xx.y-k (RHEL5 only)
  - Iterate the correct list for remote port removal.
  - Honor FCPORT_UPDATE_NEEDED dpc flag for all ISPs.
  - Don't set NPIV_CONFIG_NEEDED and RELOGIN_NEEDED flag for ISPFX00.

  - 8.06.00.10.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix):
  - Remove entry in outstanding_cmds array if we fail to abort a request.
  - Clear RISC INT reg only for an event and not always while polling.
  - Fix undefined behavior in call to snprintf().

  RHEL6, SLES11, UEK, Citrix:
  - Add BSG interface for read/write serdes register.
  - Fix request queue null dereference.
  - Disable adapter when we encounter a PCI disconnect..
  - Refactor shutdown code so some functionality can be reused.
  - QLAFX00 Fix issue with not displaying node name after system reboot.
  - Add changes to obtain ISPFX00 adapters product information.
  - Add IOCTL command abort logic for ISPFX00.

  RHEL5, SLES10:
  - Add netlink interface for read/write serdes register.
  - Fix udev fwdump rules.

  RHEL5:
  - Update 8G and 4G firmware to version 7.01.00.

  README:
  - Updated for builing kernel with out-of-box driver for Boot-from-SAN.
  - Updated for building ramdisk with rpm driver for Citrix Boot-from-SAN.

  - 8.06.00.09.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Honor execute firmware failures.
  - Add BPM support for 25xx.
  - Disable INTx interrupt for ISP82XX.
  - Correctly set mailboxes for extended init control block.
  - Duplicate luns instantiated after doing ISP reset.
  - Don't consider the drivers knocked out of IDC participation for future reset recovery process.
  - Change message displaying fcport pointer to port id.
  - Fix the sparse C=2 warnings for ISP8044.
  - Revert "qla2xxx: Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX."
  - Revert "qla2xxx: Ramp down queue depth for attached SCSI devices when driver resources are low."
  - Print proper QLAFX00 product name at probe.
  - Fix compile warnings in qlafx00_build_scsi_iocbs() on BE platforms.
  - Unloading driver crashes server due to not freeing sp pool (SLES10 only).
  - Update 8G and 4G firmware to 7.0.2. (RHEL5 only).

  - 8.06.00.08.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fixups for ISP8044 beacon blink.
  - Select link initialization option bits from current operating mode.
  - Move queue depth ramp down message to i/o debug level.
  - Correctly reset Graceful Reset Bit in IDC Driver Control Register.
  - Add a new interface to update versions.
  - Correctly print out/in mailbox registers.
  - Add #if preprocessor statements to get driver compiled on UEK2 and R3.

  - 8.06.00.07.xx.y-k (RHEL5 only)
  - Set the timeout value to 45 for IOCTL commands for ISPFx00.
  - Dump IOCB on IOCTL command timeout for ISPFx00.
  - Allocate outstanding cmd array and request queue under single hardware lock.

  - 8.06.00.06.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the reset owner on ready and failed state for ISP8044.

  - 8.06.00.05.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Clear the idc control graceful bit for ISP8044 after initialization.
  - Don't check for firmware hung during the reset context.
  - Add loopback IDC-TIME-EXTEND aen handling support.
  - Clear presence bit for ISP8044 on unload and error.
  - Move Previous version info message to debug level.

  - 8.06.00.04.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Properly set the tagging for commands.
  - Get the mpi version for ISP8044.
  - Capture firmware dump on mailbox timeout for ISP8044 and ISP82XX.
  - Implementation of flash write buffer mode for ISP8044.
  - Helga loopback support.
  - Add pex-dma support for faster minidump capture on ISP8044.
  - Collect minidump for ISP8044 using sysfs.
  - Perform context reset instead of chip reset for ISP8044 host reset.
  - Don't the set nic_core_reset_owner flag for ISP8044.
  - Set IDC graceful reset and don't capture minidump if it is set.
  - Honor return value from qla82xx_device_state_handler() in qla82xx_abort_isp().
  - Silent noisy message during ISP8044 dump collection.
  - Correct debug print id's.
  - Add 8044 entry in udev rules.
  - Set default critical temperature when ISPFX00 firmware doesn't provide it.
  - QLAFX00 make over-temp AEN informational, add log for normal-temp AEN.
  - Correct Interrupt Register offset for ISPFX00
  - Remove handling of Shutdown Requested AEN from qlafx00_process_aen().
  - Send all AENs for ISPFx00 to above layers.

  - 8.06.00.03.xx.y-k (RHEL6, SLES11, RHEL5, UEK, Citrix)
  - Add changes in initialization for ISPFX00 cards with BIOS.
  - Add changes to support extended IOs for ISPFX00.

  - 8.06.00.02.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - ISP8044 abort isp.
  - Helga Flash Write.
  - Helga legacy pin based interrupt support.
  - Get all the optrom sysfs attributes for CNA.
  - Add ISP8044 to MIDTYPE macro.
  - Fix sparse warning reported for qla_nx2.c.
  - Helga Remove hardcoded return values by QLA_FUNCTION_FAILED.
  - Remove minidump and reset code if FCoE is not a owner.
  - Helga fcoe_nic_reset_owner updated.
  - Fix compilation issue on ia64.
  - Fix for serial_num not getting displayed via sysfs.
  - Add missing FCP statistics to sysfs interface.

  - 8.06.00.01.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Set VPD Size to 1K for ISP82XX, ISP8044, ISP8031 (ER107011).
  - Helga call flash recovery function from bootstrap code.
  - Clear the MBX_INTR_WAIT flag when the mailbox time-out happens.
  - Drop redundant log message when ROM lock failure happens during retries.
  - To update Helga minidump template capture.
  - Make log message that prints when a completion status requires a port down more readable.
  - Reconfigure thermal temperature.
  - Add setting of driver version string for vendor application.
  - Remove QL_DEBUG_LEVEL_17 defines from qla_nx.c.

  RHEL6, SLES11, UEK, Citrix:
  - Set the index in outstanding command array to NULL when cmd is aborted when the request timeout (ER107084).

  - 8.06.00.00.xx.y-k (RHEL6, SLES11, RHEL5, SLES10, UEK, Citrix)
  - Fix for locking issue between driver ISR and mailbox routines.
  - Do not take a second firmware dump when intentionally generating one.
  - Move qla2x00_free_device to the correct location.
  - Add support for ISP8044.
  - Update firmware link in Kconfig file.
  - Perform coverity analysis from build.sh

  RHEL6, SLES11:
  - Correct multiqueue offset calculations.
  - Add module parameter for interrupt mode.
  - Fix incorrect test after list_for_each_entry() exits.
  - Do not query FC statistics during chip reset.

  RHEL5, SLES10:
  - Use spinlock while accessing vport list.

  SLES10:
  - Correction of operator in udev rules.

  - 8.05.00.03.xx.y-k (RHEL6, SLES11), 8.04.00.15.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add clarifying printk to thermal access fail cases.

  RHEL5, SLES10:
  - Move list add of ha to non-error section of probe_one.

  - 8.05.00.02.xx.y-k (RHEL6, SLES11), 8.04.00.14.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Revert "qla2xxx: Add setting of driver version string for vendor application."

  RHEL6, SLES11, UEK, Citrix:
  - Debug ID corrections.
  - Add iounmap(ha->cregbase) calls for ISPFX00 adapters for proper driver cleanup during load / unload.
  - Clear the outstanding command array for task management processing for ISPFx00.
  - Remove Request / Response transfer error AENs handling from qlafx00_async_event().
  - Proper cleanup of BSG request when the request time-out on ISPFx00.
  - Fix issue with calling sp_done() twice for task management commands.
  - Fix bug in cont_entry handling for the cases when FW provides more data than mid layer can handle.
  - Correction to structure size while registering host information with firmware.

  RHEL5, SLES10:
  - Use vp_list field of scsi_qla_host while traversing virtual ports list.

  - 8.05.00.01.xx.y-k (RHEL6, SLES11.x), 8.04.00.13.xx.y-k (RHEL5, SLES10, UEK, Citrix)
  - Add setting of driver version string for vendor application.
  - Integrate generic card temperature with mezz card temperature.
  - Correction of comment in MBC opcode defines.
  - Wait for IDC complete event to finish loopback operation.
  - Don't process state change aen for reset owner.
  - Don't process RSCNs for a vport on the same physical adapter.
  - Correct list-iteration bug in Report-ID Acquisition codes.

  RHEL6, SLES11:
  - Addedd logic to monitor aenmbx0 register for fixed intervals on ISPFx00.
  - Remove unnecessary operations from qlafx00_soc_cpu_reset() and
  add resetting IRQ ack register per core.

  RHEL5, SLES10:
  - Return -EINVAL when setting up loopback operation.

  RHEL5:
  - Inclusion of 8G firmware version 5.09.00.
  - Inclusion of 4G firmware version 5.09.00.

  - 8.05.00.00.xx.y-k (RHEL6.x and SLES11.x)
  - Enhancements to support ISPFx00.

  - 8.04.00.12.xx.y-k
  - Update the copyright information.
  - Display the lock owner on lock acquire failure.
  - Move loopback mode reset after chip reset check.
  - Extra loopback error handling for ISP83xx.
  - Do link initialization on get loop id failure.
  - Do MPI reset only for 81xx.

  V2632 (RHEL 6.x, SLES 11.x, Citrix 6.0, UEK):
  - Revert "qla2xxx: Optimize existing port name server query matching."
  - Revert "qla2xxx: Avoid losing any fc ports when loop id's are exhausted."
  - Don't free pool that wasn't allocated.
  - Unload hangs after issuing BSG commands to vport.

  Citrix 6.0:
  - Create initrd as a part of installation and removal of the driver rpm.
  - RPM install should install driver under extra instead of driver directory.

  RHEL 5.x, SLES 10.x:
  - MBA_IDC_NOTIFY case should fallthru.
  - Add fw_dump_size sysfs attribute file.
  - Add test for validity of virtual host in netlink interface.

  SLES 10.x:
  - Add 8031/2031 cases to request firmware.

  - 8.04.00.11.xx.y-k
  - Move marking fcport online ahead of setting iiDMA speed.
  - Add 16Gb/s case to get port speed capability.
  - Get VPD information from common location for CNA.
  - Don't clear drv active on iospace config failure.
  - Display that driver is operating in legacy interrupt mode.
  - Add "16" speed to link speeds array in qla2x00_iidma_fcport() function
  - Correct race in loop_state assignment during reset handling.
  - Reject loopback request if one is already in progress.
  - Update the FTP site references in the driver sources.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Obtain loopback iteration count from bsg request.
  - Parameterize the link speed string conversion function.
  - Update ql2xextended_error_logging parameter description with new options.
  - Fix typo in qla2xxx driver.
  - Free rsp_data even on error in qla2x00_process_loopback().
  - Avoid null pointer dereference in shutdown routine.

  RHEL 5.x:
  - Remove fabric_logout() calls from qla2x00_dev_loss_tmo_callbk() function.

  SLES10.x:
  - Clear local references of rport on device loss timeout notification from FC transport.

  - 8.04.00.10.xx.y-k
  - Honor status value of 2 for report-id acquisition.
  - Ignore driver ack bit if corresponding presence bit is not set.
  - Add Gen3 PCIe speed 8GT/s to the log message.
  - Acquire risc semaphore before resetting ISP.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Ramp down queue depth for attached SCSI devices when driver resources are low.
  - Determine the number of outstanding commands based on available resources.
  - Fix for kernel crash when external loopback diagnostic is run through BSG interface.
  - Fix coccinelle warnings in qla2x00_relogin.
  - Test and clear FCPORT_UPDATE_NEEDED atomically.
  - Use correct Request-Q-Out register during bidirectional request processing
  - Fix typo in qla83xx_fw_dump function.
  - Move noisy Start scsi failed messages to verbose logging level.
  - Fix for warnings reported by sparse.

  RHEL 5.x:
  - Inclusion of 4G/8G firmware version 5.08.00.
  - Log message when qla2xenablemsix module parameter is set to 2 (MSI mode) and adapter does not support MSI mode.
  - Revert "qla2xxx: Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports"
  - Revert "qla2xxx: No fcport FC-4 type assignment in GA_NXT response."

  Citrix 6.x:
  - RPM build should hide the directory naming convention from user.

  - 8.04.00.09.xx.y-k
  - No fcport FC-4 type assignment in GA_NXT response.
  - Fix checkpatch error in qla2xxx_mctp_dump.
  - Change in setting UNLOADING flag and FC vports logout sequence while unloading qla2xxx driver.
  - Clear unsupported 'states' during Get-FW-State queries.

  V2632 (RHEL 6.x, SLES 11.x Citrix 6.0 and UEK):
  - Pass correct parameters while creating an initrd.
  - Remove spurious taking of ha->vport_slock spinlock.

  UEK:
  - Add macro for kernel extended version.

  RHEL 5.x:
  - Use GFF_ID to check FCP-SCSI FC4 type before logging into Nx_Ports.
  - Pass correct parameters while creating an initrd.

  - 8.04.00.08.xx.y-k (RHEL 6.x, SLES 11.x, UEK and Citrix)
  - Correct loop_id_map allocation-size and usage.

  - 8.04.00.07.xx.y-k
  - Prefix qla2xxx with the dump file name.
  - Delay for legacy interrupts not required for all boards for ISP83xx.
  - Use correct logger path in udev scripts.
  - Allow MSI interrupt registration for ISP82xx.
  - Don't toggle RISC interrupt bits after IRQ lines are attached.
  - Fix for legacy interrupts for ISP83xx.
  - Restrict nic core reset to one function for mctp.
  - Update to Implementation of the mctp.
  - Enable fw attributes for ISP24xx and above.
  - Get fcal position map should not be called for p2p topology.
  - Set Maximum Read Request Size to 4K.
  - Enclose adapter related calls in adapter check in failed state handler.
  - Fix for handling some error conditions in loopback.
  - Fix description of qla2xmaxqdepth parameter.
  - Set idc version if function is first one to come.-
  - Do not restrict the number of NPIV ports for ISP83xx.
  - Do PCI fundamental reset for 83xx.
  - Fail initialization if unable to load RISC code.
  - Ensure PLOGI is sent to Fabric Management-Server upon request.
  - Remove setting Scsi_host->this_id during adapter probe.
  - Use #defines instead of hardcoded values for intr status.

  V2632 (RHEL 6.x, SLES 11.x and UEK):
  - Remove dumping fw on timeout for bidirectional commands.
  - T10 DIF - ISP83xx changes.
  - Fix incorrect status reporting on DIF errors.
  - Change log messages to dbg and remove dumping fw on timeout for bidirectional.
  - Use the right field for container_of.

  SLES10.x:
  - Correct implementation of qla2x00_get_idma_speed.
  - Remove check for ISPs other than ISP81xx from qla81xx_set_port_config

  RHEL5.x:
  - Add stubs for edc and edc_status interface.

  - 8.04.00.06.xx.y-k
  - Don't call nic restart firmware if it is already active and running.
  - Wrong PCIe (2.5Gb/s x8) speed in the kernel message for ISP82xx.
  - Perform ROM mbx cmd access only after ISP soft-reset during f/w recovery.
  - Fix rval may be used uninitialized in this function warning.
  - Implement beacon support for ISP83xx CNA.
  - Fix for continuous rescan attempts in arbitrated loop topology.
  - Only enable link up on the correct interrupt event.
  - Update the driver license.
  - Don't register legacy interrupts for ISP82xx.
  - Add bit to identify Sensei card for thermal temp.
  - Implementation of MCTP.
  - IDC implementation for ISP83xx.
  - Add FW DUMP SIZE sysfs attribute.
  - Implementation of bidirectional.
  - Use bitmap to store loop_id's for fcports.
  - Display mailbox failure by default.
  - Remove redundant NULL check before release_firmware() call.
  - Add check in qla82xx_watchdog for failed hardware state.
  - Add I2C BSG interface.
  - Use dracut to rebuild the initramfs on RHEL 6 in build.sh.
  - Don't call failed handler for default case.
  - Add hilda fc fcoe entries in the udev rules file.

  - 8.04.00.05.xx.y-k
  - Display proper firmware version when new minidump template is gathered for ISP82xx.
  - Properly check for current state after the fabric-login request.
  - Proper completion to scsi-ml for scsi status task_set_full and busy.
  - Don't capture minidump for ISP82xx on flash update from application.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Optimize existing port name server query matching.
  - Remove mirrored field vp_idx from struct fc_port.
  - Display proper supported speeds for 16G FC adapters.
  - Fix reset time out as qla2xxx not ack to reset request.
  - Stats should be different from physical and virtual ports.
  - Block flash access from application when device is initialized for ISP82xx.
  - Handle interrupt registration failures more gracefully.
  - Logic to detect overheat condition and fail ISP82xx.
  - Remove unneeded DPC wakeups from qla82xx_watchdog.
  - RHEL 5.x/SLES 10.x
  - Revert : IO failure during ISP82xx reset.
  - Revert : Avoid depending on SCSI host_lock in queuecommand function.

  - 8.04.00.04.55.6-k
  - 8.04.00.04.32.1-k
  - ISP83xx(16G FC) support for Xenserver 6.0 and Oracle UEK.

  - 8.04.00.04.xx.y-k
  - Remove resetting memory during device initialization for ISP82xx.
  - Proper detection of firmware abort error code for ISP82xx.
  - SLES10 SPx: Add udev script, udev rules file, kmdtool.
  - SLES10 SPx: Proper notification of device udev event for automatic gathering of firmware dump.

  - 8.04.00.03.xx.y-k
  - Correct link-reset regressions introduced during 83xx porting.
  - Avoid invalid request queue dereference for bad response packets.
  - Stop iteration after first failure in -_id functions.
  - Fix incorrect register access in qla2x00_start_iocbs().
  - Fix to update proper command completion upon command retries.
  - Hard code the number of loop entries at 128.
  - Reference proper scsi_qla_host structure for processing non-scsi SRB commands.
  - Handle device mapping changes due to device logout.
  - Fix wrong decrement, null sp access.
  - Initialize the command done routine.
  - Avoid losing any fc ports when loop id's are exhausted.
  - Complete mailbox command timedout to avoid initialization failures during next reset cycle.
  - Add ha->max_fibre_devices to keep track of the maximum number of targets.
  - Cache swl during fabric discovery.
  - Remove EDC sysfs interface.
  - Perform firmware dump procedure on mailbox command timeout.
  - Change the log message when previous dump is available to retrieve for ISP82xx.
  - Remove check for null fcport from host reset handler.
  - Correct out of bounds read of ISP2200 mailbox registers.
  - Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
  - Reduce mbx-command timeout for Login/Logout requests.
  - Clear options-flags while issuing stop-firmware mbx command.
  - Add an "is reset active" helper.
  - Prep zero-length BSG data-transfer requests.
  - Perform implicit logout during rport tear-down.
  - Handle failure cases during fabric_login
  - Increase speed of flash access in ISP82xx adapters to improve firmware load speed.
  - Add check for null fcport references in qla2xxx_queuecommand.
  - Handle change notifications based on switch scan results.
  - Use consistent DL mask for ELS/CT passthru requests.
  - Consolidation of SRB processing.


author: QLogic Corp <support@qlogic.com> 5.04.01.08.00.00-k0-1
changelog:
  The following fixes have been made to the iSCSI HBA Driver for
  Linux Kernel 2.6.x/3.x since last driver version 5.04.01.07.xx.xx-x0


  v5.04.01.08.xx.xx-x0
  --------------------

  Defect/Enhancement: Bug
  Problem: modprobe qla4xxx is killed by systemd due to timeout [Novell BZ#868390]
  Solution: The exporting of sysfs DDBs from qla4xxx_probe_adapter added delay of
  approximately 15s due to which system-udevd killed the modprobe of the
  driver. Added fix to export the sysfs DDBs from the DPC handler.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4/6.5, SLES 11 SP3, SLES12
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: In INTx mode, the driver receives interrupts before registering the
  interrupt handler [ER116254]
  Solution: Prevent interrupts from falling back to INTx mode in case of
  ISP82xx due to known issues with mixed interrupt modes.
  Introduced: Day One
  Impact: HW: ISP82xx
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Remove ISP8042 device ID from the PCI table.
  Introduced: v5.04.01.00
  Impact: HW: ISP8042
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.04.01.07.xx.xx-x0
  --------------------

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Add SLES12 support.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: SLES12
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Add RHEL7.0 support.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL7
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: System crash while target discovery for ISP40XX
  Solution: Added fix to initialize hardware queue correctly for ISP40XX
  Introduced: v5.04.01.01.05.06-c0
  Impact: HW: ISP4XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Added support of 0xFF capture mask for minidump.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Added new opcodes for 84XX Minidump template.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.04.01.06.xx.xx-x0
  --------------------

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Change the default minidump capture mask to firmware defined capture
  mask instead of driver defined capture mask.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Added PEX DMA Support for ISP8022 Adapter
  Introduced: Day One
  Impact: HW: ISP82XX
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.04.01.05.xx.xx-x0
  --------------------

  Defect/Enhancement: Bug
  Problem: Adapter reset recovery takes longer time to complete as stop_firmware
  mailbox command does not complete outstanding IOs. [ER113517]
  Solution: Added fix to not wait for IO completion after issuing stop_firmware
  mailbox command.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Login to target failure when discovery and login initiated
  simultaneously from iscsiadm [ER113812]
  Solution: Added fix to clear the DDB index map only in case of connection close
  mailbox command failure with 4005h.
  Introduced: v5.04.01.01
  Impact: HW: ISP8XXX
  OS: RHEL 6.3/6.4/6.5, SLES 11 SP3
  Protocol: iSCSI

  v5.04.01.04.xx.xx-x0
  --------------------

  Defect/Enhancement: Bug
  Problem: The driver is unable to login back to the discovered targets after
  controller reboot and firmware context reset. [ER99379]
  Solution: Fixed the driver to retry sendtarget relogin until all sendtargets
  come back to login state. Added delayed work in reset path to make one
  relogin attempt during driver initialization and retry relogins post
  driver initialization, if necessary.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 5.7/5.8/5.9/5.10
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Added support for Diagnostics MBOX command
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Memory leak in func qla4_84xx_config_acb()
  Solution: Use correct goto statement to free DMA memory in case of
  failure in function qla4_84xx_config_acb() to fix the memory
  leak.
  Introduced: v5.04.01.01.00.00-k0
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Support setting of local CHAP index and CHAP credentials
  for flash target entry
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Unable to list unidirectional CHAP info from sysfs
  Solution: Correct the check for local CHAP entry type
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Unable to list discovered targets from application
  Solution: Correctly update session discovery_parent_idx to store
  sendtarget flashnode index.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  v5.04.01.03.xx.xx-x0
  --------------------

  Defect/Enhancement: Bug
  Problem: Driver unable to collect minidump in ISP8xxx due to incorrect ISP check
  Solution: Added correct check for ISP8XXX in QLA83XX_POLLRD case. Also mark
  entry skip flag without adding the fw_dump_skip_size in case if entry
  capture mask and firmware set capture mask are different, to avoid
  the data mismatch
  Introduced: v5.04.01.01.05.06-c0
  Impact: HW: ISP8XXX
  OS: Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Driver unable to collect minidump in ISP84xx [ER112577]
  Solution: Added fix to skip the new entry type that driver cannot process,
  and adjust the total buffer size by subtracting the skipped bytes
  from it in order to avoid data mismatch because of the new entries.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.04.01.02.xx.xx-x0
  --------------------

  Defect/Enhancement: Bug
  Problem: Call trace and reset ACK timeout seen during graceful reset of adapter
  [ER111970]
  Solution: Added fix in driver to allow reset thread to ACK within timeout of 10s
  by reducing IO wait completion time.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.04.01.01.xx.xx-x0/1
  ----------------------

  Defect/Enhancement: Bug
  Problem: ISP82XX adapter reset goes in endless loop of reset/recovery [ER110611]
  Solution: Added fix to close the window in the driver due to which the
  watchdog queues the reset_work twice causing endless loop of reset
  Introduced: v5.03.01.09.xx.xx-x0
  Impact: HW: ISP8XXX
  OS: Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: In case of System Error (8002), driver did not display outgoing
  mailbox registers
  Solution: Added fix to dump mailbox and some other registers which will
  be helpful for debugging.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: After disabling iSNS from application, enabling iSNS does not
  show any iSNS targets
  Solution: Clear iSNS flags only during stopping iSNS service while disabling
  iSNS. Added fix to not clear iSNS flags before invoking de-register
  functions.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 5.7/5.8/5.9/5.10, Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Kdump kernel panic seen on simulating a crash using
  /proc/sysrq-trigger [ER109608, ER110326]
  Solution: Added fix to make driver ready to process the interrupt before
  interrupt handler is registered and also stopped the driver to process
  IOCB interrupts if RISC to HOST IOCB interrupt bit not set.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Driver fails internal loopback test due to link flap error on switch
  Solution: Added fix to pass the loopback test if link up notification
  not received due to link flap error.
  Introduced: Day One
  Impact: HW: ISP83XX/ISP84XX
  OS: RHEL 5.7/5.8/5.9/5.10, Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Export more firmware information in sysfs
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4, SLES 11 SP2/SP3
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Avoid adding any new flash target entry at index 0 and 1 as they are
  reserved for pre-boot utilities.
  Introduced: v5.03.01.13.00.00-k0
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Discovery parent index shows incorrect value
  Solution: Added fix to unconditionally display discovery parent index
  Introduced: v5.03.01.13.00.00-k0
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Unable to configure IPv6 traffic class
  Solution: Added fix to set IPv6 traffic class if device type is IPv6
  Introduced: v5.03.01.13.00.00-k0
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Unable to set DDB link with desired value
  Solution: Added fix to use discovery_parent_idx instead of discovery_parent_type
  as parent type is not configurable and is derived from value of
  ddb_link
  Introduced: v5.03.01.13.00.00-k0
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Login to invalid target entries through flashnode creates a FAILED
  target session which does not get removed/logged_out [ER105562]
  Solution: Added fix to remove failed target session during logout.
  Introduced: v5.03.01.13.00.00-k0
  Impact: HW: All supported Hardware
  OS: RHEL 6.3/6.4, SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Driver is unable to clear DDB indices when 512 targets are logged out
  [ER110677]
  Solution: Added fix to clear DDB Index map before freeing DDB while destroying
  session during logout of targets.
  Introduced: v5.03.01.13.00.00-k0
  Impact: HW: ISP8XXX
  OS: RHEL 6.3/6.4, SLES 11 SP2/SP3
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Mailbox command 0x102 (IDC Time Extend) failure seen while applying
  changes to iface using iscsiadm [ER109882]
  Solution: Added fix to extend IDC timeout only for ISP84xx when IDC ACK needs
  to be posted and disable ACB mailbox command completion is in
  intermediate state
  Introduced: v5.04.01.00.xx.xx-x3/4
  Impact: HW: ISP8XXX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Updated the modinfo for parameter ql4xextended_error_logging [ER111132]
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: If driver failed to register IRQ at probe time, driver still exposed
  scsi host to the OS. [ER110835]
  Solution: Added fix to return ERROR status in case of driver failed to
  register IRQ.
  Introduced: Day One
  Impact: HW: ISP82XX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  v5.04.01.00.xx.xx-x3/4
  ----------------------

  Defect/Enhancement: Bug
  Problem: Kdump kernel panic seen on simulating a crash using
  /proc/sysrq-trigger [ER109608]
  Solution: Added fix to avoid release of session objects from host reset during
  probe which otherwise causes list corruption of session objects.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 5.7/5.8/5.9
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Mailbox command 0x31 (Free DDB Entry) failure seen while driver unload
  [ER109922]
  Solution: Added fix to wait for mailbox command 0x56 (DDB logout) completion
  before mailbox command 0x31.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: It takes longer time to capture minidump for ISP83XX
  Solution: Add pex-dma support for capturing minidump in ISP83XX
  Introduced: Day One
  Impact: HW: ISP83XX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Adapter reset failure due to rom-lock contention during reset
  recovery process
  Solution: Added fix to remove 2 secs contention due to peg halt check
  in recovery path by distinguishing bootstrap process invoked
  from probe or reset context.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: Incorrect reset sequence for ISP83xx/ISP84xx in case of PCIe AER error
  recovery [ER103484]
  Solution: Fixed AER reset sequence for ISP83xx/ISP84xx card so that iSCSI driver
  is reset owner and performs adapter recovery correctly.
  Introduced: 5.03.01.03.xx.xx-x0
  Impact: HW: ISP83XX/ISP84XX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: If get_sys_info fails, probe adapter succeeds, but brings the adapter
  in unstable state
  Solution: Fixed the get_sys_info return type to int and processed the
  appropriate error in probe adapter
  Introduced: Day One
  Impact: HW: ISP80XX/ISP40XX
  OS: RHEL 5.7/5.8/5.9,
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Driver displays IPv6 AENs as unknown AENS [ER106913]
  Solution: Added IPv6 AEN defines to handle IPv6 AEN notifications and take
  correct action based on the type of AEN.
  Introduced: Day One
  Impact: HW: ISP80XX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: It takes longer time to capture minidump for ISP8042
  Solution: Added pex-dma support to improve minidump capture time
  Introduced: Day One
  Impact: HW: ISP8042
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Flood of DHCP multicast and broadcast packets seen during loopback
  diagnostics [ER107012]
  Solution: Implemented Disable ACB feature while internal loopback diagnostic is in progress,
  which resets all the active connections to target. Disable ACB would
  filter out all the DHCP multicast and broadcast packets which cause the
  diagnostic test to take longer time to complete or failures.
  Also implemented IDC extend timeout feature in case disable ACB takes
  longer time to complete.
  Introduced: Day One
  Impact: HW: ISP8042
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Bug
  Problem: In the event of a system error, only 16bits of 32bit registers are
  getting printed
  Solution: Change the readw() calls to readl() calls in functions responsible
  for dumping registers to read out the complete 32bit values
  Introduced: Day One
  Impact: HW: ISP40XX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Incorrect ISP names displayed when loading driver with INTx interrupt
  mode [ER108272]
  Solution: Fix print statement to show correct ISP names
  Introduced: 5.04.01.00
  Impact: HW: ISP8042
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Add support for ISP8042
  Introduced: Day One
  Impact: HW: ISP8042
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2/SP3, RHEL 5.7/5.8/5.9,
  Citrix 5.6 FP1/6.0/6.0.2/6.1
  Protocol: iSCSI

  v5.03.01.13.xx.xx-x0
  --------------------

  Defect/Enhancement: Enhancement
  Problem: Unable to manage iSCSI target information stored on adapter flash using iscsiadm
  Solution: Added Flash Node Management support allowing iscsiadm to manage iSCSI
  target information stored on adapter flash.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: SLES 11 SP3
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Call trace observed while making iSCSI target discovery using iscsiadm
  [ER104437]
  Solution: The iocb_cnt calculation was incorrect in the IO path of ping command.
  With every ping command the iocb_cnt was decremented in the IO
  response path without incrementing in the IO request path. Due to this
  the iocb_cnt overruns on the negative side, which makes it larger than
  the IOCB count at firmware level. Hence the driver always returned
  host busy command status as queueing error to the midlayer. Added fix
  to increment the iocb_cnt in the IO path of ping command.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Add 64-bit LUN addressing for LUN reset
  Solution: LUN reset mailbox command passes LUN ID as a 32-bit value to
  firmware. Updated qla4xxx_lun_reset() to pass LUN ID as a 64-bit
  value in mbox_cmd[2] and mbox_cmd[3].
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1, RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: After storage controller reboot and adapter firmware reset, the discovered
  targets are not logged back in.
  Solution: Added fix in driver to retry sendtarget relogin until all sendtargets
  come back to login state. Added delayed work in reset path to make
  one relogin attempt during driver initialization and retry relogins
  post driver initialization, if necessary.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1, SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Missing check for ISP80xx to check firmware health and complete
  mailbox commands prematurely in adapter reset path
  Solution: Added missing check for ISP80xx if adapter reset is triggered by
  NEED_RESET state set by another driver or forced reset from sysfs
  to check firmware health and complete mailbox commands prematurely.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Any new target added during driver reinitialization were not detected
  Solution: If a new target is detected during scan of the firmware's target list then
  the target is added to the driver's internal database and then presented to the OS.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Rename ACB_STATE macros with IP_ADDRSTATE macros
  Solution: Rename ACB_STATE macros with IP_ADDRSTATE macros and cleanup
  duplicate macros defining the ACB/IP states.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1, SLES 10 SP3/SP4, RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Cleanup AF_83XX_NO_FWDUMP flag and use IDC_CTRL bit1 to capture minidump
  Solution: Removed AF_83XX_NO_FWDUMP flag and directly checked IDC_CTRL bit1
  while taking minidump, to check for graceful reset.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8/5.9, SLES 10 SP3/SP4, RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Adapter initialization is not retried if qla4xxx_initialize_adapter fails
  Solution: If qla4xxx_initialize_adapter fails, first check if failure is due to
  IRQs not attached in order to skip retrial, then free the IRQs and
  retry initializing the adapter correctly.
  Introduced: Driver v5.03.01.05
  Impact: HW: ISP8XXX
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1, SLES 10 SP3/SP4, RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Correctly handle msleep_interruptible in device_bootstrap
  Solution: If waiting for signals was interrupted then the device was put to
  FAILED state. Added msleep instead of msleep_interruptible to handle
  this correctly.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: SLES 10 SP3/SP4, RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Multiple retries of adapter initialization seen causing disable of
  the adapter
  Solution: Additional F/W Options field in Initialize Firmware Control block was
  getting some garbage value due to which driver was waiting for a
  longer time for the mailbox to complete eventually doing re-init
  multiple times and finally disabling the card.
  Added fix to mask all the bits in Additional F/W Options to 0.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Driver displayed qla4xxx_set_ddb_entry failure with 4005 error after
  driver reinitialization [ER94988]
  Solution: Added fix in driver to prevent relogin to target if initiator IP
  is not configured.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1, SLES 10 SP3/SP4
  Protocol: iSCSI

  v5.03.01.12.xx.xx-x0
  ----------------------

  Defect/Enhancement: Defect
  Problem: Flash read failure caused CHAP table read/write to wrong address
  Solution: If flash read for FLT fails, we are assigning wrong default address
  for CHAP table in FLT which causes CHAP table read/write to wrong address.
  Assign correct default CHAP table address to FLT.
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Added missing check for ISP83XX in CHAP related functions
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 6.2/6.3/6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Unable to retrieve DCBX/TLV data
  Solution: Added support in driver to retrieve DCBX/TLV data from application
  Introduced: Day One
  Impact: HW: ISP8XXX
  OS: RHEL 5.6/5.7/5.8/5.9, RHEL 6.0/6.1, Citrix 5.6 FP1/6.0/6.0.2/6.1,
  SLES 11 SP1, SLES 10 SP3/SP4
  Protocol: iSCSI

  v5.03.01.11.xx.xx-x1
  ----------------------

  Defect/Enhancement: Enhancement
  Problem: Incorrect command line parameter ql2xqfullrampup [ER104870]
  Solution: Rename command line parameter ql2xqfullrampup to ql4xqfullrampup
  Introduced: v5.03.01.01.05.07-k0
  Impact: HW: All supported Hardware
  OS: RHEL 5.6/5.7/5.8/5.9
  Protocol: iSCSI

  v5.03.01.11.xx.xx-x0
  ----------------------

  Defect/Enhancement: Defect
  Problem: Firmware hang seen while running long run IOs [ER103736]
  Solution: Request queue count manipulation has to be done in IO path,
  keeping req_in and req_out pointer two IOCB count away.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Modified Makefile to add SLES 11 SP3 support
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: SLES 11 SP3
  Protocol: iSCSI

  v5.03.01.10.xx.xx-x0
  ----------------------

  Defect/Enhancement: Defect
  Problem: Boot from SAN fails in some cases where boot target login response
  is slow.
  Solution: Added fix to wait for the boot target login response in probe_adapter path.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, RHEL 6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Invalid argument error seen if CHAP authentication not set
  while reading chap_in_idx and chap_out_idx attributes.
  Solution: Added fix to return next line character instead of error
  "Invalid argument" from sysfs
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, RHEL 6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: iscsid crash seen while iscsid session recovery
  Solution: During session recovery the driver sent multiple
  ISCSI_CONN_STATE_LOGGED_IN event from qla4xxx_conn_start() and
  qla4xxx_ddb_change(). Added fix to send only one
  ISCSI_CONN_STATE_LOGGED_IN event.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, RHEL 6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Memory corruption issue seen in qla4xxx_get_ep_fwdb
  Solution: In qla4xxx_get_ep_fwdb(), dst_addr is of type struct sockaddr.
  We are copying sizeof(struct sockaddr_in6) bytes to dst_addr
  which is 12 bytes larger. This caused memory corruption.
  So change dst_addr to struct sockaddr_storage which is
  of 128 byte, large enough to hold sizeof(struct sockaddr_in6).
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, RHEL 6.4, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Floods of debug messages from INTx handler were seen on screen [ER102992]
  Solution: Moved debug messages in case of INTx interrupt handler from
  debug level 2 to 7.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Added macro WARN_ONCE to indicate if iSCSI driver presence bit is removed
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Set graceful reset bit in IDC control register if reset
  is issued by appliaction so that the driver does not collect
  the firmware dump along with the adapter resets.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Double resets were observed in case of firmware hang [ER103203]
  Solution: Added fix to complete mailbox prematurely by setting AF_FW_RECOVERY
  flag due to which driver will not wait for scsi sommands to complete.
  Introduced: Day one
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: The driver failed to load in boot from SAN case with 1G iSCSI
  adapter [ER103219]
  Solution: The fix was added to check AF_IRQ_ATTACHED flag only for ISP80XX case
  and allow retry of qla4xxx_initialize_adapter for ISP40XX.
  Introduced: Driver v5.03.01.05
  Impact: HW: ISP40xx
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.03.01.09.xx.xx-x1
  ----------------------

  Defect/Enhancement: Defect
  Problem: In BFS scenario, iscsistart failed to login to boot targets
  Solution: Added missing check for ISP83XX in function get_fw_boot_info()
  Introduced: Driver v5.03.01.03.00.00-k0
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, SLES 11 SP2
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Modified Makefile to add RHEL6.4 support
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, RHEL 6.4, SLES 11 SP2
  Protocol: iSCSI

  v5.03.01.09.xx.xx-x0
  ----------------------

  Defect/Enhancement: Defect
  Problem: Loopback test failure when initiated by iSCSI protocol [ER102082]
  Solution: While the driver restores the original port configuration using
  set_port_config, wait for IDC completion AEN and LINK UP event
  before completing the loopback iteration and giving control to
  application. This ensures that events of one loopback iteration
  do not intervene the next iteration.
  Introduced: Driver v5.03.01.08.xx.xx-x0
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: System power cycle needed due to hardware wedging caused by disabling
  pause frames
  Solution: Added fix to ensure the E-port is out of reset, by performing E-port
  initialization, everytime before disabling the pause frames.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Unexpected driver behavior when module parameter ql4xdontresethba
  value is set to other than 1 [ER0000000100932]
  Solution: Added fix to check if ql4xdontresethba is set or clear. Remove
  all the check where ql4xdontresethba is compared against any
  absolute value.
  Introduced: Driver v5.03.01.08.xx.xx-x0
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: iSCSI function failed to ACK reset when peg_halt happened within
  30 secs of previous peg_halt.
  Solution: Implemented workqueues to handle reset recovery and updated watchdog
  to detect a reset while a reset recovery is in progress after firmware
  initialization is done.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0, SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Adapter re-initialization caused kernel panic [ER0000000102026, ER0000000102173]
  Solution: Added fix to pass correct function parameter to qla4_8xxx_rd_direct
  while retrying of adapter initialization.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 6.2, RHEL 6.3, SLES 11 SP2
  Protocol: iSCSI

  v5.03.01.08.xx.xx-x0
  --------------------

  Defect/Enhancement: Defect
  Problem: Adapter initialization failure during driver load time
  Solution: The get_sys_info mailbox command was changed in firmware that caused
  the mailbox command to fail thus failing the adapter initialization.
  Added fix to handle the get_sys_info mailbox command to validate the
  size of data returned in the mailbox command response.
  Introduced: Firmware v5.02.04
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Driver module parameter ql4xdontresethba=2 does not allow
  context resets [ER00000000100932]
  Solution: Added fix to set the DONTRESET_BIT0, in case ql4xdontresethba==2.
  Also changed the ql4xdontresethba description, if parameter value is
  set to 1.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Different activities are performed on link events while loopback
  diagnostics is in progress
  Solution: Fix is to quiesce all driver activities like re-login to devices,
  dynamic LUN scan, iSNS checks etc. while loopback diagnostics is
  in progress.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Loopback mode request on same physical port from same or other
  protocol drivers must not be permitted
  Solution: Added fix to invalidate loopback request on same physical port
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8, RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0,
  SLES 11 SP1, SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Failure of restoration of loopback port configuration to original
  configuration
  Solution: If restoring of original port configuration fails then reset the chip.
  Failure to do so may not restore the link state and other driver
  instances sharing the physical port would be left in a
  non-operational state.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8, RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0,
  SLES 11 SP1, SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: ISP4xx and ISP82xx firmware may assert if given more IOCBs than it can handle
  Solution: The driver was updated to throttle the number of active IOCBs based
  on the total # of IOCB buffers received from GetFirmwareStatus mbx_sts[2].
  Introduced: Day One
  Impact: HW: ISP4xxx/ISP82xx
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Failure to re-register IRQ handlers while retrying of adapter initialization
  Solution: Added fix to re-register the interrupt handler when adapter
  initialization is retried.
  Introduced: Day One
  Impact: HW: ISP8022/ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Driver unable to collect forceful firmware dump [ER0000000097083]
  Solution: Added support to forcefully collect firmware dump using command,
  "echo 2 > /sys/class/scsi_host/hostX/device/fw_dump"
  For ISP83xx case, check if ISP83xx can perform reset before setting
  reset owner and firmware hang flags.
  Introduced: Day One
  Impact: HW: ISP8022/ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.03.01.07.xx.xx-x0
  ---------------------

  Defect/Enhancement: Defect
  Problem: Minidump collected using QLogic application gives warning messages
  when verified using minidump verification tool
  Solution: Added fix to return the total minidump size to the application and
  sync the coredump data structure with the application data structure.
  Introduced: Day One
  Impact: HW: ISP8022/ISP8032
  OS: RHEL 5.6/5.7/5.8, RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0,
  SLES 11 SP1, SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Compilation warnings were seen on SLES 10 32-bit arch
  Solution: Fixed compilation warnings of 32-bit kernel flavors
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Unknown AENs were seen in log messages
  Solution: Added debug statements to print the received AENs instead of unknown AENs
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: System panic was seen while collecting Minidump using QLogic application
  Solution: Added fix to collect minidump specific to ISP83xx instead of older method
  used for ISP40xx.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8
  Protocol: iSCSI

  v5.03.01.06.xx.xx-x0
  ---------------------

  Defect/Enhancement: Defect
  Problem: Mailbox command timeout seen just after completion of adapter reset
  Solution: Added fix to enable mailbox/AEN interrupts before initializing
  the firmware to make sure mailbox/AEN interrupts are processed
  in interrupt mode.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Kernel panic while driver is trying relogin to targets after completion
  of adapter resets
  Solution: Added fix to handle stale DDB entries after reinitialization of DDB
  list and 8014 AENs for new devices.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: RHEL 5.6/5.7/5.8, RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0,
  SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Target scan took longer time when driver loaded in legacy interrupt mode
  Solution: Added fix to complete the scsi command as early as possible from the
  legacy interrupt handler context instead of waiting for completion
  from the DPC context
  Introduced: Day One
  Impact: HW: ISP8032
  OS: SLES10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Adapter reset seen for ACB old state as VALID and new state as ACQUIRING
  Solution: Added fix to perform context reset instead of adapter reset for ACB
  states ACB_STATE_VALID and ACB_STATE_ACQUIRING
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8, RHEL 6.2, SLES 11 SP2, SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Retries for initialize adapter seen if driver probe failure encountered
  due to mailbox timeout
  Solution: Added fix to clear AF_IRQ_ATTACHED and fail probe adapter if initialize
  adapter fails and thus avoid multiple reties of initialize adapter.
  Introduced: Day One
  Impact: HW: ISP8032
  OS: RHEL 5.6/5.7/5.8
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: IPv6 targets do not come back online after cable pulls (LINK DOWN/UP)
  Solution: Set options field of ddb_entry struct to identify IPv6 target.
  After driver DDB allocation, options field of ddb_entry struct
  was not populated. So IPv6 targets behaved like IPv4 targets and
  issued relogin on IPv4 targets instead of IPv6 targets. Set options
  field of ddb_entry struct to identify IPv6 target.
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: RHEL 5.6/5.7/5.8
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Pause flood causes switch port to disable
  Solution: Added Disable Pause Frame support
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Udev fw_dump file nomenclature mismatch across multiple protocols
  Solution: Use standard nomenclature for udev fw_dump file
  Introduced: Day One
  Impact: HW: ISP8022/ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Mailbox command timeouts seen intermittently
  Solution: Fix double clearing of RISC interrupt in polling mode
  Introduced: Day One
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: IDC lock recovery in PCIe AER error recovery path
  Solution: Fix recursive IDC locking in PCIe AER recovery path
  Introduced: Day One
  Impact: HW: ISP8022/ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Firmware relogin failure on adapter reset causes IOs to halt
  Solution: Retrieve the firmware device state to check if relogin is necessary
  Introduced: Day One
  Impact: HW: ISP8022/ISP8032
  OS: RHEL 5.6/5.7/5.8
  Protocol: iSCSI

  v5.03.01.05.xx.xx-x0
  ---------------------

  Defect/Enhancement: Enhancement
  Problem: Driver not honoring the inter driver communication (IDC) mechanism
  for adapter port configuration (e.g. Loopback)
  Solution: Add IDC support to properly handle adapter port configuration
  Introduced: v5.03.01.03.xx.xx-xx
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Incorrect setting of IDC version in IDC register
  Solution: Added IDC version in lower byte of IDC register
  Introduced: v5.03.01.03.xx.xx-xx
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: MSI/MSI-X coexistence with INTx leading to Call Traces (Spurious
  Interrupts)
  Solution: Added fix to prevent MSI/MSI-X falling back to legacy interrupt mode
  Introduced: Day One
  Impact: HW: ISP8022
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: SLES 10 Xen kernel does not support MSI/MSI-X, causing driver load
  failure
  Solution: Added fix in driver to work in legacy (INTx) interrupt mode only for
  Xen kernel on SLES 10
  Introduced: Day One
  Impact: HW: ISP8022
  OS: SLES 10 SP3/SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Retry of adapter initialization if IRQ allocation fails
  Solution: Added fix to fail loading of driver if IRQ allocation fails
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Call Trace seen while unloading the driver
  Solution: Added fix to remove sysfs binary file before scsi_remove_host
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Upon failure of driver load, driver unload leads to system panic
  Solution: Added fix to not cleanup resources again on driver unload as cleanup
  is done during drive load failure
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  v5.03.01.04.xx.xx-x0
  ---------------------

  Defect/Enhancement: Defect
  Problem: Kernel panic while driver unload, caused due to processing stale
  interrupts
  Solution: Clear interrupts before destroying the iSCSI context
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Data corruption due to silent completion of IOs with dropped frames
  Solution: Proper handling of SCSI underrun cases while processing status IOCBs
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Side band management tools cannot query firmware to retrieve driver
  version
  Solution: Issue new mailbox command to pass driver version to firmware
  Introduced: 5.03.01.04
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Incorrect display of inter driver communication (IDC)
  lock owner to user
  Solution: Update driver debug statement to print correct IDC lock owner
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Memory not freed for reset template on driver unload
  Solution: Free memory allocated for reset template while unloading driver
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Corruption of firmwares target database during re-login
  Solution: Driver should just send an index of the target to
  firmware for which driver wants to do a re-login.
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0, SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Resetting adapter takes longer time to complete
  Solution: Complete mailbox prematurely if reset triggered through NEED_RESET.
  This will avoid the delay caused due to wait for mailbox completion which is
  unnecessary during adapter resets.
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: RHEL 6.0, RHEL 6.1, Citrix 5.6 FP1, Citrix 6.0, SLES 11 SP1
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Potential kernel memory corruption, leading to in-consistent system
  behavior
  Solution: In qla4xxx_ep_connect use large enough data type to avoid memory
  corruption for dst_addr variable.
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: RHEL 6.2, SLES 11 SP2
  Protocol: iSCSI

  v5.03.01.03.xx.xx-x0
  --------------------

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Add ISP8032 support
  Impact: HW: ISP8032
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem:
  Solution: Add open-iscsi support, allows iscsiadm to manage qla4xxx adapters.
  Impact: HW: All
  OS: RHEL6.2 / 6.3, SLES11SP2
  Protocol: iSCSI

  v5.02.15.07.XX.XX-k0
  --------------------

  Defect/Enhancement: Enhancement
  Problem: Participate in quiescent mode handling
  Solution: Correctly handle quiescent device state
  Introduced: Day One
  Impact: HW: ISP8242
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Clean-up unused minidump code
  Solution: Clean-up unused minidump code
  Introduced: Day One
  Impact: HW: ISP8242
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Stack trace while running report LUN command from QLogic Application.
  Solution: Replace sleeping function call "del_timer_sync" from interrupt context
  with function "del_timer" in IOCTL path.
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: Added driver support to allow OS to dynamically ramp-up/ramp-down queue depth when LUN
  reports "QUEUE FULL" scsi status.
  Solution: Added support for scsi_host_template hook change_queue_depth
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Back to Back Adapter reset in case of firmware hung leading to longer recovery time.
  Solution: Check firmware hung after mailbox command gained access to ensure
  faster recovery - that the mailbox command does not wait un-necessarily during a
  firmware recovery and prevent premature mailbox timeout which will
  lead to back to back adapter reset's.
  Introduced: Day One
  Impact: HW: ISP8242
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Enhancement
  Problem: When the firmware hangs during high IO traffic, the recovery may take too long, leading to the
  mid-layer timing out some commands.
  Solution: This patch distinguishes a firmware hang from a normal reset, and completes IOs quickly to
  ensure that recovery is faster, leading to lesser commands timing out.
  Introduced: Day One
  Impact: HW: ISP8242
  OS: All supported Linux flavors
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Driver unload causes the disable interrupt mailbox cmd (0x10h) to timeout leading to longer driver
  unload time.
  Solution: Use polling mode for disable interrupt mailbox cmd for completion since interrupt is turned off.
  Introduced: Day One
  Impact: HW: ISP8242
  OS: RHEL5.6, RHEL5.7, RHEL5.8, SLES10SP3, SLES10SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: udev event was not triggered after minidump was collected
  Change: Correct udev rules file to include class
  Introduced: Day One
  Impact: HW: ISP8242
  OS: RHEL5.6, RHEL5.7, RHEL5.8
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Back to Back adapter reset in case of host reset initiated via sg_reset leads to longer recovery time.
  Solution: Removed early reset of the adapter flag to reset adapter context only once as expected.
  Introduced: Day One
  Impact: HW: ISP8242
  OS: SLES10SP3, SLES10SP4
  Protocol: iSCSI

  Defect/Enhancement: Defect
  Problem: Incorrect detection of OS leading to driver compilation error
  Solution: Fix makefile to detect kernel version correctly
  Introduced: Day One
  Impact: HW: All supported Hardware.
  OS: RHEL6.1, RHEL6.2
  Protocol: iSCSI


author: QLogic Corp <support@qlogic.com> 5.3.55.7-1
changelog:
  The following features/fixes have been made to the QLogic Linux NIC
  driver

  Version 5.3.55.7 (HP NCDE 11.00)

  - ER0000000132145 : Inconsistency in RSS/TSS values of NPAR's between physical ports of same adapter
  Defect/Enhancement: Defect
  Problem: Driver is not showing proper max RSS/TSS values for 82xx adapter after running qaucli application
  Change: Fixed the code where driver was setting incorrect max RSS/TSS values
  Introduced: 5.3.52
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.55.6

  - Changes to the qlcnic driver cause RHEVM hypervisors to spew errors thus seriously impacting performance - RH bugzilla 1047613 [ER0000000131934]
  Defect/Enhancement: Defect
  Problem: Driver is printing heavy logs in case of MAC address filters overrun
  Change: Removed the log from code
  Introduced: 5.1.38
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Back out flash update enhancements pre-enablement for 84xx by ER0000000115166. [ER0000000132089]
  Defect/Enhancement: Enhancement
  Problem: Flash update enhancements are not required for 84xx
  Change: Removing support of flash update enhancements
  Introduced: 5.3.55.4
  Impact: HW: 84xx series adapters
  OS: All supported Linux flavors
  FW: 6.4.12
  OtherSW: N/A

  Version 5.3.55.5

  - NPAR Max BW for last 4 functions for helga seen as zero. [ER0000000115775]
  Defect/Enhancement: Defect
  Problem: NPAR Max BW for last 4 functions for helga seen as zero.
  Change: Driver need to go through active vNIC instead of maximum vNIC function supported
  on adapter and pack the vNIC information array in the buffer such that application
  can access it using vNIC number as the array index.
  Introduced: 5.3.50
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors which support RSS/TSS through sysfs
  FW: N/A
  OtherSW: N/A

  - Flash update failed due to secure bit check [ER0000000131678].
  Problem: The secure bit check logic had a off-by-one bit error.
  Change: Fixed the error in the log.
  Introduced: 5.3.55.4
  Impact: 84xx series adapters
  OS: All supported Linux flavors
  FW: 6.4.12
  OtherSW: N/A

  - Add an interface to export board temperature [ER0000000103155]
  Defect/Enhancement: Enhancement
  Problem: Provide an interface (HWMON or SYSFS) to export board
  temperature.
  Change: Add HWMON or SYSFS handlers
  Introduced: 5.3.55.5
  Impact: HW: 84xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Sles11Sp3 System crashed on issuing ./ql_dump.sh -m ALL 0x7 [ER0000000131647]
  Defect/Enhancement: Defect
  Problem: Driver did not register a handler for one of the callback function,
  which caused a NULL pointer dereference.
  Change: Registered a callback handler.
  Introduced: 5.3.55.2
  Impact: HW: All supported adapters
  OS: SLES11SP3, RHEL7.0, RHEL6.5, UEK-R3
  FW: N/A
  OtherSW: N/A

  - RHEL5.10 x64:kmod qlcnic driver rpm install fails w/ ksym(print_hex_dump)dependency error. [ER0000000131743]
  Defect/Enhancement: Defect
  Problem: Driver used print_hex_dump function which is defined in kernel but not added in kabi list.
  Change: Ported the function from upstream under qlcnic_print_hex_dump name.
  Introduced: 5.3.55
  Impact: HW: All supported adapters
  OS: RHEL5x
  FW: N/A
  OtherSW: N/A

  - RH7.0 X64 Helga B0 - qlcnic driver 5.3.55.4 reported call traces while loading driver. [ER0000000131805]
  Defect/Enhancement: Defect
  Problem: RHEL7.0 kernel throws warning traces if sysfs node is created with write permission but without
  write chandler.
  Change: Removed a write permission of flash_upd_ctrl_data sysfs node
  Introduced: 5.3.55.4
  Impact: HW: 84xx series adapters.
  OS: RHEL7.0
  FW: N/A
  OtherSW: N/A

  Version 5.3.55.4

  - Flash update enhancements pre-enabelement for 84xx [ER0000000115166]
  Defect/Enhancement: Enhancement
  Problem: Pre-enablements required for 84xx flash update enhancements
  Change: Added support for the following:
  o sysfs node to query 84xx adapter flash update capability.
  o Active/standby flash region handling during bootup and
  reset recovery.
  o Block flash updates from the host on adapters where secure
  flash update is enabled
  Introduced: Day one
  Impact: HW: 84xx series adapters
  OS: All supported Linux flavors
  FW: 6.4.12
  OtherSW: N/A

  Version 5.3.55.3

  - Second time vlan-id set is not working for helga on XEN system.[ER0000000116197]
  Defect/Enhancement: Defect
  Problem: Wrong VLAN ID was added to eSwitch.
  Change: Clear old VLAN ID before adding new eSwitch VLAN ID.
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - SL11SP3x32: Appropriate message is not seen in /var/log/messages if setup tx rings to > 1 on pci=nomsi mode [ER0000000116280]
  Defect/Enhancement: Defect
  Problem: While changing TSS value, driver is printing RSS count along with error message as part part of ring validation.
  Change: Do not validate ring count if they are not going to change.
  Introduced: 5.3.52
  Impact: HW: All supported adapters
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - SLES11 SP3 Helga B0 - QLCNIC driver load failed with legacy interrupt after setting all functions(0-3,8-15) NIC. [ER0000000115541]
  Defect/Enhancement: Defect
  Problem: Seen stack trace during driver load.
  Change: ARI is no more supported with legacy interrupt for PCI_FUNC >= 8
  Introduced: Day one
  Impact: HW: 84xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - SLES11 SP3 Helga B0 - System crashed while running internal loopback with FCoE + unload/reload qlcnic driver. [ER0000000115023]
  Defect/Enhancement: Defect
  Problem: DCB AEN was getting invoked before handler and delayed_work struct was initialized for it.
  Change: Setup DCB AEN handler and initialize delayed_work struct before AEN IRQ is enabled.
  Introduced: 5.3.49
  Impact: HW: 83xx and 84xx series adapters.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Rhel6.4KVM - SRIOV - Failures obseved on VF driver load in Rhel and sles VMs. [ER0000000115820]
  Defect/Enhancement: Defect
  Problem: Seen failure messages while setting TX interrupt coalescing parameter from VF.
  Change: Added validation code in PF for Tx interrupt coalescing parameter from VF.
  Introduced: 5.3.55
  Impact: HW: All supported adapters
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  Version 5.3.55.2

  - Treat minidump template headers seperately for p3p and Hilda/Helga [ER0000000114959]
  Defect/Enhancement: Defect
  Problem: Template header for P3P and Hilda/Helga may change independently.
  Change: Re-factored code to handle minidump headers seperately for P3P and Hilda/Helga
  Introduced: 5.1.38
  Impact: HW: All supported adapters
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - P3P - Reset firmware API lock at driver load [ER0000000114793]
  Defect/Enhancement: Defect
  Problem: API lock sem 5 was not available during driver probe.
  Change: Force release API lock if required at probe
  Introduced: Day one
  Impact: HW: 82xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - RHEL6.5: Fix the bug in logging the lock owner id, when rom lock access fails. Failed to acquire sem=5 lock; holdby=-1 in firmware. [ER0000000114795]
  Defect/Enhancement: Defect
  Problem: If the READ operation (in order to determine who is holding the pcie semaphore lock) to id_reg fails,
  then the error message is wrongly displayed as -1 as the entity holding the lock.
  Change: Fixed error message to display pcie semaphore lock holder only if the READ is valid.
  Introduced: Day one
  Impact: HW: 82xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - SRIOV: vlan0 not working. [ER0000000113360]
  Defect/Enhancement: Defect
  Problem: Adapter did not allow VLAN id 0 traffic as driver did not program VLAN id 0 filters.
  Change: Set a bit while enabling VLAN filtering where adapter allows VLAN id 0 traffic
  even if driver does not program VLAN id 0 filters.
  Introduced: Day one
  Impact: HW: 84xx series adapter.
  OS: All supported Linux flavors.
  FW: 6.4.12
  OtherSW: N/A

  - NPAR Max BW for last 4 functions for helga seen as zero. [ER0000000115775]
  Defect/Enhancement: Defect
  Problem: NPAR Max BW for last 4 functions for helga seen as zero.
  Change: Driver need to go through active vNIC instead of maximum vNIC function supported on adapter.
  Introduced: 5.3.50
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors which support RSS/TSS through sysfs
  FW: N/A
  OtherSW: N/A

  - rss value not getting updated in /sys/class/net/eth4/device/max_rss. [ER0000000115777]
  Defect/Enhancement: Defect
  Problem: Driver was not showing current number of RSS rings configured through sysfs
  Change: Display current number of RSS rings configured
  Introduced: 5.3.52
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Add GPL licence to all scripts [ER0000000115515]
  Defect/Enhancement: Enhancement
  Problem: QLogic scripts were using proprietary license
  Change: Updated to GPL license
  Introduced: Day one
  Impact: HW: N/A
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: All scripts provided in driver packages

  Version 5.3.55.1

  - Can not set RSS/TSS value through sysfs [ER0000000115561]
  Defect/Enhancement: Defect
  Problem: sysfs hook to change RSS and TSS is not allowing to write new value.
  Change: Removed a check in driver which was not allowing to write new RSS/TSS value in sysfs.
  Introduced: 5.3.53
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors which support RSS/TSS through sysfs
  FW: N/A
  OtherSW: N/A

  - Driver fails npar sysfs request if less than 8 or 8 NPAR functions are enabled. [ER0000000114680]
  Defect/Enhancement: Defect
  Problem: When 8 NPAR functions are enabled, newer QCC still sends size in multiple of 16
  which result in failure because of the size mismatch.
  Change: Allow newer QCC to work with 8 NPAR function.
  Introduced: 5.3.53
  Impact: HW: 84xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - RH65 X64 Hilda + P3P - System crashed automatcially on each reboot when both Hilda + P3P plugged in server and pci=nomsi is set. [ER0000000114782]
  Defect/Enhancement: Defect
  Problem: Driver was not initializing Legacy interrupt related resources in case of P3P because of improper
  usage of use_msi and use_msi_x module parameters.
  Change: Changed the usage of use_msi and use_msi_x module parameter.
  Introduced: 5.1.38
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Windows VF Driver is not getting loaded in Linux Hyperviosr environment where PF driver spports Guest Vlan enhancements. [ER0000000114804]
  Defect/Enhancement: Enhancement
  Problem: Windows VF driver was not loading with Linux PF driver.
  Change: Driver was not allowing any VLAN to be programmend from SR-IOV VF.
  With this change, windows driver is loading fine.
  Introduced: 5.3.54
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Add Get/Set Channel interface in RHEL65 ethtool [ER0000000114945]
  Defect/Enhancement: Enhancement
  Problem: Missing support for Get/Set channel interface.
  Change: Add support for Get/Set channel interface.
  Introduced: 5.2.43
  Impact: HW: All supported adapters.
  OS: RHEL65.
  FW: N/A
  OtherSW: N/A

  Version 5.3.55

  - Internal LB fails with qlcnic 5.3.54.1 on Helga [ER0000000115301]
  Defect/Enhancement: Defect
  Problem: Internal loopback test fails on Helga because driver is not setting linkup variable in link event handler
  while device is in loopback mode.
  Change: Set linkup variable before returning from link event handler in case of loopback mode.
  Introduced: 5.3.52.5
  Impact: HW: 84xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - eswitch gvlan ping on linux fails after firmware reset [ER0000000113931]
  Defect/Enhancement: Defect
  Problem: Incase of firmware reset vlan list was getting reseted to zero.
  Change: Do not re-initialize vlan list in case of adapter reset.
  Introduced: 5.3.52.2
  Impact: HW: 84xx series adapter.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Interrupt coalescing is not working as exepcted. [ER0000000112674]
  Defect/Enhancement: Defect
  Problem: Driver was not correctly setting Interrupt coalescing parameters
  for 83xx/84xx Series adapters.
  Change: Refactored Interrupt coalescing code path for default driver load as
  well as ethtool input for ALL adapters.
  Introduced: Day One.
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  - Appropriate message is not seen in /var/log/messages if the driver is loaded with "modprobe qlcnic use_msi=0" [ER0000000115227]
  Defect/Enhancement: Enhancement
  Problem: This is expected behavior. To load driver in MSI mode, user should use "modprobe qlcnic use use_msi_x=0"
  Change: Updated man page to clarify the usage of module parameters.
  Introduced: Day One.
  Impact: HW: All supported adapters.
  OS: All supported Linux flavors.
  FW: N/A
  OtherSW: N/A

  Version 5.3.54.1

  - TX Timeout seen when enabling and disabling SRIOV [ER0000000115050]
  Defect/Enhancement: Defect
  Problem: TX Timeout seen when enabling and disabling SRIOV
  Change: Since netif_tx_disable is called __qlcnic_down which in turn stop all the queues. So in __qlcnic_up we need to start all the queues.
  Introduced: 5.3.54
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.54
  Version 5.3.52.6

  - driver is not displaying complete ethtool statistics [ER0000000114637]
  Defect/Enhancement: Defect
  Problem: Some statistics at the tail end are not being displayed
  Change: Consider number of Tx queues while calculating ethtool statistics length
  Introduced: 5.3.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Beacon is always enabled for Helga-NIC.[ER0000000114619]
  Defect/Enhancement: Defect
  Problem: Not able to change beacon state
  Change: Added support to read and set beacon state
  Introduced: 5.3.52.5
  Impact: HW: 83xx and 84xx adaters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Ifconfig TX stats are broken in 5.3.52.5 driver.[ER0000000114634]
  Defect/Enhancement: Defect
  Problem: 'ifconfig ethX' command is not showing Tx statistics
  Change: Update Tx statistics for Muiti Tx queues before sending it to kernel
  Introduced: 5.3.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Improper logging by udev script.[ER0000000114708]
  Defect/Enhancement: Defect
  Problem: udev script to collect Firmware minidump is logging incomplete instruction
  Change: Added the correct instruction to collect and save minidump
  Introduced: 5.3.52.4
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - System crashes while creating VF on RHEL 6.4. [ER0000000114578]
  Defect/Enhancement: Defect
  Problem: System panics during addition of loopback filter becasue
  memory for loopback filters is not allocated
  Change: Allocated the memory for loopback filters for PF driver
  Introduced: 5.3.52.5
  Impact: HW: 83xx and 84xx adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - "Max Guest VLANs supported per VF = 0" shows in the logs if 64 Vfs are enabled per port. [ER0000000114570]
  Defect/Enhancement: Defect
  Problem: VLAN filter distribution logic is running out of filters when 64 VFs are enabled
  Change: Configure per VF VLAN filters to 7
  Introduced: 5.3.52.4
  Impact: HW: 83xx and 84xx adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Hilda : when SRIOV is enabled on the hilda port, "Failed to configure VF Flood bit on PF, err=2" logs are observed. [ER0000000114576]
  Defect/Enhancement: Defect
  Problem: driver is trying to configure VF Flood bit on PF on 83xx adapter which is not supported
  Change: configure VF Flood bit on PF only for 84xx adapter
  Introduced: 5.3.52.5
  Impact: HW: 83xx adapter
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.52.5

  - Vlan traffic from VNIC/PF is not working. [ER0000000113404]
  Defect/Enhancement: Defect
  Problem: VNIC - VNIC (eswitch) traffic was not flowing through.
  Change: MAC learning enabled on SRIOV PF. VF Flood bit set on PF. PF is by default in promiscous mode.
  Introduced: 5.3.52.2
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Fw Reset is observed when windows VM and Linux VM boot simultaneously by uplinking VFs to the VMs. [ER0000000114041]
  Defect/Enhancement: Defect
  Problem: FW was aborting due to wrong filters getting programmed by VF drivers.
  Change: Added validation code in PF to restrict MAC-star mode from VF.
  Introduced: 5.3.52.2
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Helga - 2014 & Dell: "Failed to create Tx ctx" logs are observed while enabling and disabling SRIOV on Helga followed by Fw_Reset[ER0000000114332]
  Defect/Enhancement: Defect
  Problem: Multiple TX context creation for PF failed due to limited TX queues programmed on the port for PF
  Change: Program more number of TX queues on the port for PF
  Introduced: 5.3.52
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SLES11 SP3 Helga - QLCNIC reported MB 0x29h command timeout and chip reset while running NIC diagnostic using QCC GUI.[ER0000000112602]
  Defect/Enhancement: Defect
  Problem: In legacy interrupt mode switching between interrupt to polling or vice versa for mailbox was leading to unprocessed AEN in driver
  Change: Disable mailbox polling. Process mailbox through interrupts only
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Helga - 2014 & Dell : while enabling and disabling SRIOV with load , unload of qlcnic, system goes for reboot.[ER0000000114333]
  Defect/Enhancement: Defect
  Problem: NULL pointer dereference in SRIOV cleanup path on qlcnic_remove()
  Change: Remove pointer checks in code path and add SRIOV_ENABLE bit check while doing SRIOV cleanup
  Introduced: 5.3.52.2
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - firmware should not be sending link up while the port is in loopback mode. [ER0000000113505]
  Defect/Enhancement: Defect
  Problem: Firmware was sending Link up during loopback test, driver should not advertise Link up to the stack if the port is in
  loopback diagnostic mode
  Change: Do not advertise link up to the stack if the port is in loopback mode
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - All parameter of last function value are zeroed in 16 NPAR test app.[ER0000000114374]
  Defect/Enhancement: Defect
  Problem: All parameter of last function value are zeroed in 16 NPAR test app
  Change: Nic validating routine should use total active pci functions rather than
  going through only active nic functions.
  Introduced: 5.3.52.2
  Impact: HW: 84xx adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RHEL63-TSS: Tx timeout seen on Helga ports while sending traffic + Hilda and P3P with qlcnic 5.3.52.1 [ER0000000113529]
  Defect/Enhancement: Defect
  Problem: Tx timeout seen while running TCP and UDP traffic
  Change: Added per queue tx_clean_lock and fixed a bug where sw_consumer is not
  getting updated in driver unload path
  Introduced: 5.3.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Disable DCBX changes from VF. [ER0000000113483]
  Defect/Enhancement: Defect
  Problem: VF driver was able to display DCB related information
  Change: Removed dcbnl ops from VF driver.
  Introduced: 5.3.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Get Beacon support for 83xx adapters. [ER0000000107265]
  Defect/Enhancement: Enhancement
  Problem: Driver's adapter structure stores values to enable/disable beacon
  for 83xx adapter.
  change: Use MBX command to detect current beacon state of 83xx adapter.
  Introduced: Day one
  Impact: HW: 83xx/84xx Series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RH64 X64 Helga B0 - QLCNIC 5.3.52.2 reported Tx timeout + System crashed
  while running FCoE IO + FW reset using echo 3 with FCoE. [ER0000000114191]
  Defect/Enhancement: Defect
  Problem: Tx timeout seen when system is booted with pci=nomsi mode.
  Change: Set Tx ring to QLCNIC_SINGLE_RING when falling back into legacy
  mode due to pci=nomsi settings for system
  Introduced: 5.3.52
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.52.4

  - HelgaB0: while installing qlcnic driver seen "Unknown PCI type[0]" messages.[ER0000000114169]
  Defect/Enhancement: Defect
  Problem: Driver was reading parameter for inactive pci function.
  Change: Read parameters for active pci function only.
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Perform force minidump via qlcnic when the driver is loaded with auto_fw_reset=0 [ER0000000110061]
  Defect/Enhancement: Defect
  Problem: When auto firmware recovery is disabled then minidump was not getting captured on force dump operation
  Change: Collect minidump also when auto firmware recovery is disabled
  Introduced: 5.3.51
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - HelgaB0: SRIOV: Ping not working (VF-Peer) for some of the tagged interfaces. [ER0000000113412]
  Defect/Enhancement: Defect
  Problem: Number of filters was getting exhausted. So, no further MAC-VLAN filters was getting programmed.
  Change: Increased number of filters per VLAN
  Introduced: 5.3.52.2
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RH6.5:FW dump file failed to save in /opt/QLogic_Corporation/FW_Dumps/ directory.[ER0000000112528]
  Defect/Enhancement: Defect
  Problem: Selinux was preventing to create dump file in /opt directory
  Change: Change the Selinux context of the directory to allow write permission
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.52.3

  - Add VXLAN offload support [ER0000000114110]
  Defect/Enhancement: Enhancement
  Problem: Add VXLAN offload support
  Change: Added VXLAN offload support
  Introduced: NA
  Impact: HW: 83xx/84xx series adapters
  OS: RHEL7.0
  FW: N/A
  OtherSW: N/A

  - Citrix 6.2: Helga: NPAR Information shows blank with qlcnic.4
  Defect/Enhancement: Defect
  Problem: When NPAR was disable, driver still return size in multiple of 16 which result in QCC read failure.
  Change: Fix QCC backward compatibility by returning total pci function count.
  Introduced: 5.3.52.2
  Impact: HW: 84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.52.2

  - SLES11SP2 Helga B0 : IO and NIC traffic stopped after 30 odd iterations of peg halt all and board going into failed state. [ER0000000111794]
  Defect/Enhancement: Defect
  Problem: kzalloc() was failing to allocate memory for bootloader. Hence adapter reset was failing.
  Change: Replaced kzalloc() with vzalloc() to avoid memory allocation failure.
  Introduced: Day one
  Impact: HW: 83xx/84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Helga: Support for VLAN enahancement. [ER0000000113767]
  Defect/Enhancement: Enhancement
  Problem: 83xx adapters were only supporting max one VLAN per VF due to hardware limitation.
  Change: Added multiple VLANs support per VF for 84xx series adapter
  Introduced: Day one
  Impact: HW: 84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Helga: Support for 16 NPAR functions. [ER0000000113743]
  Defect/Enhancement: Enhancement
  Problem: 83xx adapters were only supporting max 8 NPAR functions.
  Change: Added Support for 16 NPAR functions for 84xx series adapter
  Introduced: Day one
  Impact: HW: 84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - udev rules is not working. [ER0000000112499]
  Defect/Enhancement: Defect
  Problem: SYSFS Key/value pair rule is not present in redhat7. Hence it was not working
  Change: Replace SYSFS key with ATTRS key in udev rules file
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 5.3.52.1

  - SLES11SP3-TSS: Internal LB test on P3P hangs forever. [ER0000000113366]
  Defect/Enhancement: Defect
  Problem: Diagnostic test was not restoring Tx ring values after completion.
  Change: Added code to restore Tx ring values after diagnostic test are complete.
  Introduced: 5.2.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SLES11SP3-TSS: Interrupt offline test using "ethtool -t" fails on Hilda port.
  [ER0000000113364]
  Defect/Enhancement: Defect
  Problem: Diagnostic test was not restoring Tx ring values after completion.
  Change: Added code to restore Tx ring values after diagnostic test are complete.
  Introduced: 5.2.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SLES11SP3-TSS: Ethtool allows configure RX and TX values to 0 with mbx cmd
  failures. [ER0000000113363]
  Defect/Enhancement: Defect
  Problem: Driver was missing check for 0 values while configuring Tx/Rx queue values.
  Change: Added check for input values > 0 for configuring Tx/Rx queues.
  Introduced: 5.2.52
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RHEL63-Helga: TSS: Tx timeout leading to system unresponsiveness upon
  receiving TCP4,6 + UDP4 traffic on helga ports. [ER0000000113285]
  Defect/Enhancement: Defect
  Problem: Driver was not starting all Tx queue duing link up event.
  Change: updated netif api to enable all Tx queues on link up event.
  Introduced: 5.2.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - VM Crash while doing load unload of driver on VM. [ER0000000113378]
  Defect/Enhancement: Defect
  Problem: Driver was not starting all Tx queue duing link up event.
  Change: updated netif api to enable all Tx queues on link up event.
  Introduced: 5.2.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SLES11 SP3 Helga - QLCNIC reported DCBX MB 0x35h command to timeout and
  reset recovery failed while running NIC diagnostic. [ER0000000112289]
  Defect/Enhancement: Defect
  Problem: INIT_NIC command was getting issued twice which was reinitializing FW.
  Change: DCB AEN register was reissuing INIT_NIC cmd. Instead club all options together and issue INIT_NIC only once.
  Introduced: 5.3.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - qlcnic: Few changes required in qlcnic man page and README [ER0000000112621]
  Defect/Enhancement: Defect
  Problem: Documentation needs to be updated to reflect usage of features in driver.
  Change: updated documentation to reflect usage of new features in driver.
  Introduced: Day One
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.52

  - SLES11 SP3 Helga : ./ql_dump.sh -m ALL mask-value command not changing mask value on qla2xxx and qla4xxx drivers [ER0000000112247]
  Defect/Enhancement: Defect
  Problem: Tuning of capture masks in storage drivers requires reload of the driver, due to some services which were using
  storage drivers, unload of those drivers was failing in script. Hence capture mask was not changing.
  Change: Add a note in the script to stop the services which are using storage drivers before changing the capture mask.
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Support for Multiple Tx Queues for 83xx/84xx adapter. [ER0000000110757]
  Defect/Enhancement: Ehnancement
  Problem: Driver is using single Tx queue for processing Tx traffic for
  83xx/84xx series adapters.
  Change: Enhance driver to create multiple Tx queue for 83xx/84xx series adapter.
  Introduced: Day one
  Impact: HW: 83xx/84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RHEL63: P3P: System panics while trying to change max_txq value from 4.
  [ER0000000112229]
  Defect/Enhancement: Defect
  Problem: Driver did not had correct check for Tx queue calculation when
  multiple Tx queues were added 82xx series adapter.
  change: Added correct check for Tx rings calculations for ALL adapters.
  Introduced: 5.2.48
  Impact: HW: 82xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RHEL63: P3P: Able to set max_txq=8 (with errors) when P3P is configured
  as NPAR. [ER0000000112230]
  Defect/Enhancement: Defect
  Problem: Driver was allowing to set 8 TSS for 82xx series adapter.
  change: Added code for distributing Tx rings in NPAR configuration.
  Introduced: 5.2.48
  Impact: HW: 82xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RHEL6.4 x86: System is hung running iperf at the same time with ifconfig
  down/up. [ER0000000112508]
  Defect/Enhancement: Defect
  Problem: Driver removed tx_clean_lock during implemetation of Multiple
  Tx queue for 82xx series adapter.
  change: Added code for tx_clean_lock back to prevent race during driver
  unload path.
  Introduced: 5.2.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SUSE11 SP3 x64: Ping stopped on bond0 while trying bonding mode 1
  failover in loop. [ER0000000112697]
  Defect/Enhancement: Defect
  Problem: Driver removed tx_clean_lock during implemetation of Multiple
  Tx queue for 82xx series adapter.
  change: Added code for tx_clean_lock back to prevent race during driver
  unload path.
  Introduced: 5.2.48
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Port "Flash update enhancements in P3P" changes over to Hilda.
  [ER0000000098466]
  Defect/Enhancement: Defect
  Problem: Flash update enhancements support was not present in Hilda.
  change: Added code for this support.
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Driver is not issuing "set driver version" mailbox command to firmware. [ER0000000112609]
  Defect/Enhancement: Defect
  Problem: Driver is not issuing "set driver version" mailbox command to firmware
  Change: Fixed the issue where driver was not reading extra capabilities for 83xx/84xx
  Introduced: 5.2.44
  Impact: HW: 83xx/84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Backporting bug in minidump collection code [ER0000000112257]
  Defect/Enhancement: Defect
  Problem: While backporting 83xx changes, memcpy() got replaced with memory_read_from_buffer()
  Change: Replaced memory_read_from_buffer() with memcpy() in SLES11SP2 and UEK tree.
  Introduced: 5.1.38
  Impact: HW: All supported adapters
  OS: SLES11SP2 and UEK
  FW: N/A
  OtherSW: N/A

  - SUSE11 SP3: max_rss value cannot be set on SUSE11 SP3 using Helga.
  [ER0000000111989]
  Defect/Enhancement: Defect
  Problem: Multiple Tx queue implementation for 82xx series adapter caused
  regression for max_rss value for 83xx/84xx adapters.
  change: Removed check from code which caused regression.
  Introduced: 5.2.48
  Impact: HW: 83xx/84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 5.3.51

  - DCB code cleanup [ER0000000113188]
  Defect/Enhancement: Defect
  Problem: DCB code cleanup and sparse warning fix reported by kbuild test robot.
  Change: Code refactoring.
  Introduced: Day one
  Impact: HW: 83xx/84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Add a driver feature to enable default tx/rx pause parameters [ER0000000110695]
  Defect/Enhancement: Enhancement
  Problem: Add a driver feature to enable default tx/rx pause parameters.
  Change: Update ethtool standard pause parameter settings and display
  Introduced: Day one
  Impact: HW: 83xx/84xx series adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Perform force minidump via qlcnic when the driver is loaded with auto_fw_reset=0 [ER0000000110061]
  Defect/Enhancement: Defect
  Problem: When auto firmware recovery is disabled then minidump was not getting captured on force dump operation
  Change: Collect minidump also when auto firmware recovery is disabled
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Ethtool support to display Tx and rx ring details. [ER0000000107663]
  Defect/Enhancement: Enhancement
  Problem: Add support have an ethtool option to dump the Tx and rx ring details like producer, consumer indices
  Change: Added support to dump the Tx and rx ring details.
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Hilda: PCI kernel messages are seen every time after using qaucli
  [ER0000000110678]
  Defect/Enhancement: Defect
  Problem: Unrequired messages getting frinted everytime on running qaucli
  Change: Printed message only during driver load
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Rhel6.4 KVM: MBX failures observed while running enable/disable SRIOV on helga [ER0000000111791]
  Defect/Enhancement: Defect
  Problem: Device interface was going down and up without rtnl_lock() which was leading to mailbox failures
  Change: Protect interface up down using rtnl_lock()
  Introduced: Day one
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Fix register device in FAILED state patch [ER0000000113189]
  Defect/Enhancement: Defect
  Problem: Maintenance driver was not working correctly. It got introduced during code refactoring.
  Change: Fixed driver to work correctly in maintenance mode.
  Introduced: Hilda refactoring
  Impact: HW: All supported adapters
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.50.1

  - Mismatch in size of firmware dump file and actual collected dump by driver [ER0000000112086]
  Defect/Enhancement: Defect
  Problem: Size of Firmware dump file is less than the actula dump collected by driver by 4096 bytes
  Change: Changed the usage of memory_read_from_buffer()
  Introduced: Day One
  Impact: HW: 82xx/83xx/84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Helga firmware not generating dump file after peg halt [ER0000000111867]
  Defect/Enhancement: Defect
  Problem: Driver is aborting firmware dump collection process when it hits
  unknown entry opcode.
  Change: Added the logic in driver to skip unknown entry opcode instead of
  aborting the dump collection process
  Introduced: Day One
  Impact: HW: 82xx/83xx/84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Print firmware minidump template header size [ER0000000112066]
  Defect/Enhancement: Enhancement
  Problem: Driver should print firmware dump template header size
  Change: Added the support in driver to print template header size along with
  actual size of dump data
  Introduced: Day One
  Impact: HW: 82xx/83xx/84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Use netdev weight sent by stack for NAPI WEIGHT [ER0000000110254]
  Defect/Enhancement: Defect
  Problem: Driver was using higher value of NAPI weight value, which was
  displaying warning by stack during load.
  Change: Fix NAPI weight value in driver.
  Introduced: Day One
  Impact: HW: 82xx/83xx/84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.50

  - Add support for per port eswitch configuration [ER0000000109419]
  Defect/Enhancement: Enhancement
  Problem: Per port eswitch configuration was not supported by driver.
  Change: Make changes in driver to support the above change.
  Introduced: Day One
  Impact: HW: 83xx/84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Add AER support for 83xx adapter series. [ER0000000103371]
  Defect/Enhancement: Enhancement
  Problem: AER callback handlers were not added for 83xx adapter series, which was causing
  kernel panic in case of AER.
  Change: Added AER callback handlers for 83xx adapter series.
  Introduced: Day One
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Implement firmware dump function support for Helga [ER0000000108885]
  Defect/Enhancement: Enhancement
  Problem: Add support for new requirements for Helga
  Change: Added support to read default capture mask from firmware dump template header.
  Used CAMRAM to store dump state information.
  Introduced: Day One
  Impact: HW: 84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - PVID related changes in helga driver. [ER0000000110666]
  Defect/Enhancement: Enhancement
  Problem: PF driver was indicating PVID configuration to VF driver even though
  adapter supports PVID stripping. In other words VF driver should stay
  agnostic to PVID configuration but that was not the case.
  Change: Added change in PF driver to not indicate any PVID configuration to VF driver
  when PVID is configured.
  Introduced: Day One
  Impact: HW: 84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 5.3.49

  - Hilda DCBX TLVs support. [ER0000000089252]
  Defect/Enhancement: Enhancement
  Problem: DCB feature was not supported by driver.
  Change: Added DCB rtNetlink interface in driver.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.48

  - Support multiple Tx queue in 82xx series adapter. [ER0000000095198]
  Defect/Enhancement: Enhancement
  Problem: Driver is using single Tx queue for processing Tx traffic for 82xx.
  Change: Enhance driver to create multiple Tx queue for 82xx series adapter.
  Introduced: Day one
  Impact: HW: 82xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.3.47

  - Add support for 84xx adapters to load firmware from file. [ER0000000110059]
  Defect/Enhancement: Enhancement
  Problem: Driver was using wrong firmware image file name for 84xx adapter.
  Change: Use appropriate firmware image file name based on device IDs.
  Introduced: Day one
  Impact: HW: 84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Implement IDC time extend mailbox command and IDC Time extend notification AEN 8102. [ER0000000108877]
  Defect/Enhancement: Enhancement
  Problem: In order to complete firmware based IDC for loopback driver needs to handle IDC Time extend notification AEN 8102.
  Change: Added support in driver to handle IDC Time extend notification AEN 8102.
  Introduced: Day one
  Impact: HW: All supported hardwares.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Driver fix needed for ER106483: Ping does not work with PVID. [ER0000000106865]
  Defect/Enhancement: Defect
  Problem: Ping is not working when PVID is configured
  Change: VF driver should follow non VLAN packets path to the stack as adapter supports
  PVID stripping.
  Introduced: Day one
  Impact: HW: All 84xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.46.4 (HP NCDE 10.90)

  - Fix panic in network poll driver interface and refactor qlcnic_poll_controller() code patch.[ER00000000114544]
  Defect/Enhancement: Defect
  Problem: System panics when driver goes in network poll mode
  Change: Fixed panic in network poll interface code path. Process receive and transmit data
  from network poll interface of the driver
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 5.2.46.3

  - Enable IPv6 LRO with "QLCNIC_NO_DEST_IPV6_CHECK" [ER0000000113778]
  Defect/Enhancement: Defect
  Problem: IPv6 LRO is not working if driver does not set QLCNIC_NO_DEST_IPV6_CHECK bit
  Change: Set QLCNIC_NO_DEST_IPV6_CHECK bit
  Introduced: 5.2.46.2
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - HELGA B0: SRIOV: VFs showing "link detected:Yes" even when sfp cable is not connected [ER0000000112303]
  Defect/Enhancement: Defect
  Problem: On rhel6.3 VFs link is showing up even if interface is down or cable is not connected
  Change: Return value to stack after checking netif_running(netdev) with link check as well
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Redhat Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.46.2.1

  - Apply missing fix for ER0000000108857 on RHEL 6.5 kernel [ER0000000113818]
  Defect/Enhancement: Defect
  Problem: Driver throws call traces while updating QME8262 flash image.
  Change: Change QLCRD32 to QLC_SHARED_REG_RD32
  Introduced: 5.2.45
  Impact: HW: All supported Hardware
  OS: RHEL 6.5
  FW: N/A
  OtherSW: N/A

  Version 5.2.46.2

  - Performance :: RFC Throughput low by 50% on Linux(RH5.8, SLES11sp2) for CN1000Q.[ER0000000110878]
  - RFC Performance:: Throughput low by 90% on various linux flavors for QLE8242 [ER0000000112010]
  - Frame Loss when running RFC2544 latency test on BL460c RHEL5.9 1GbE.[ER0000000110896]
  Defect/Enhancement: Defect
  Problem: Driver was forcing adapter to perform LRO without destination IP check. This was
  causing LRO packets to take slower path in Firmware.
  Change: Driver won't configure LRO without destination IP check.
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Backporting bug in minidump collection code [ER0000000112257]
  Defect/Enhancement: Defect
  Problem: memory_read_from_buffer() API was supposed to be replaced with memcpy() while
  back porting of 83xx code
  Change: Replaced memory_read_from_buffer() with memcpy()
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: SLES11 SP2
  FW: N/A
  OtherSW: N/A

  Version 5.2.46.1

  - VF reset recovery fails while doing VF up/down when reset recovery is running in KVM in loop. [ER0000000111349]
  Defect/Enhancement: Defect
  Problem: VF reset fails while doing VF up/down and issuing firmware abort
  Change: Clear "adapter->need_fw_reset" variable before re-initializing VF
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.46

  - Fix invalid log in RSS routine [ER0000000110105]
  Defect/Enhancement: Defect
  Problem: Set RSS routine was dispalying incorrect error message on failure.
  Change:Fix error message.
  Introduced: 5.1.38
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors except sles11-sp2
  FW: N/A
  OtherSW: N/A

  - Load FW from file option fails with new MailBox redesign driver.[ER0000000110206]
  Defect/Enhancement: Defect
  Problem: Load firmware from file was causing driver initialization failure
  Change: Load firmware from file before setting up interrupts
  Introduced: 5.2.45
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SLES10 SP4 Hilda - System crashed while running external loopback on Hilda with all 8 NIC Functions + peg_halt_all in loop.[ER0000000110191]
  Defect/Enhancement: Defect
  Problem: Driver was accessing invalid command from mailbox command list during reset, which was leading to panic
  Change: Flush all pending commands in queue when mailbox is not available
  Introduced: 5.2.45
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SRIOV CNA: VFs initialization failed after first firmware reset. [ER0000000110244]
  Defect/Enhancement: Defect
  Problem: VF's were failing to come up after firmware reset
  Change: Reinitialize mailbox work for VFs after firmware reset
  Introduced: 5.2.45
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - QME8262-Citrix6.2: qlcnic says "Failed to get current beacon state" [ER0000000110096]
  Defect/Enhancement: Defect
  Problem: Driver was logging error for success case while storing beacon for 82xx
  Change: Log message in error case.
  Introduced: 5.2.43
  Impact: HW: 82xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Issue set driver version once per adapter, through function 0. [ER0000000108804]
  Defect/Enhancement: Defect
  Problem: Driver was issuing set driver version command for each function on 82xx and 83xx
  series adapters.
  Change: Issue set driver version once per adapter, through function 0.
  Introduced: 5.1.38
  Impact: HW: 82xx and 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.45

  - Ethtool displays incorrect speed and duplex when interface is down for 82xx adapters.[ER0000000110066]
  Defect/Enhancement: Defect
  Problem: Ethtool not displaying speed and duplex UNKNOWN when interface was down.
  It was a backporting issue.
  Change: Set link speed and duplex to UNKNOWN when interface is down.
  Introduced: 5.1.38
  Impact: HW: 82xx series adapters.
  OS: RHEL5x and SLES10SP4
  FW: N/A
  OtherSW: N/A

  - Mailbox re-design in driver. [ER0000000110080]
  Defect/Enhancement: Enhancement
  Problem: Driver firmware mailbox interface used to work in poll mode. Replace mailbox interface
  with interrupt based interface.
  Change: Remove mailbox polling in driver. Get mailbox response indication from interrupt.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Return appropriate error code when external loopback running is detected.[ER0000000110012]
  Defect/Enhancement: Enhancement
  Problem: Driver should return appropriate error code when it detects loopback test is run
  by another protocol belong to same port via elb_mode sysfs hook.
  Change: Return appropriate error code when external loopback detect it.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Loopback running detection.[ER0000000103154]
  Defect/Enhancement: Enhancement
  Problem: Driver should return appropriate error code when it detects loopback test is run
  by another protocol belong to same port via ethtool diagnostic test.
  Change: Return appropriate error code when internal loopback detect it.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Fix flash update failure on 83xx adapter. [ER0000000108804]
  Defect/Enhancement: Defect
  Problem: Flash update using QCC CLI will fail for 83xx adapter.
  Change: Return apropriate error code for read register API.
  Introduced: 5.1.38
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Incorrect ethtool speed o/p on 82xx and 83xx adapters. [ER0000000109704]
  Defect/Enhancement: Defect
  Problem: Ethtool not displaying speed and duplex UNKNOWN in following scenarios.
  - For adapters 82xx when link is down.
  - For adapters 83xx when interface is down.
  Change: - For 82xx adapter avoided reading speed from register when link is down.
  For 83xx adapter set link speed and duplex to UNKNOWN when interface is down.
  Introduced: Issue 1 Day one, Issue 2 5.0.26
  Impact: HW: 82xx and 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - External Loopaback Test does not execute on Hilda-NIC for SUS11sp3 [ER0000000109831]
  Defect/Enhancement: Defect
  Problem: Driver is not executing external loopback test when executed from ethtool
  Change: Added the missing code to run external loopback test.
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: SLES11SP3
  FW: N/A
  OtherSW: N/A

  - Driver logs showing incorrect adapter series name in warning messages. [ER0000000109490]
  Defect/Enhancement: Defect
  Problem: Driver logs showing incorrect adapter series name in warning messages.
  Change: Removed adapter series name from warning messages.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Free up memory in error path for 82xx and 83xx adapters. [ER0000000109863]
  Defect/Enhancement: Defect
  Problem: driver was not relasing memory allocated for mailbox operation in error path.
  Change: free up memory while returning from error path.
  Introduced: Day one
  Impact: HW: 82xx and 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Hilda NPAR: Delay in traffic resumption when traffic moves from virtual switch to wire [ER0000000107630]
  Defect/Enhancement: Defect
  Problem: Driver is not deleting destication MAC address of a wired incoming packet from adapters
  MAC address filter table.
  Change: Added logic to delete MAC address from adapter MAC table, if that MAC address is found as
  destination MAC address of wired packet.
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - QME8262-Citrix6.1: eSwitch traffic not working with 4.16.8 FW [ER0000000109775]
  Defect/Enhancement: Defect
  Problem: Driver was not adding a MAC address properly into adapters MAC address table.
  Change: Fixed a driver bug where driver reads correct MAC address to be programmed.
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  - Initialize proper interrupt handler for 83XX adapters while doing interrupt diag test.[ER0000000109589]
  Defect/Enhancement: Defect
  Problem: Driver was not registering proper interrupt handler for 83xx devices
  Change: Initialize proper interrupt handler for 83xx devices
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - guest Vlan on VF doesn't work in specific scenario. [ER0000000109564]
  Defect/Enhancement: Defect
  Problem: Guest VLAN doesn't work after configuring PVID
  Change: Clear previously configured PVID before configuring Guest VLAN
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - "ip link show ethX" doesnt display 4095 Vlan if it is configured on VFs. [ER0000000109598]
  Defect/Enhancement: Defect
  Problem: After configuring Guest VLAN it is not displayed by the driver to user
  Change: Display Guest VLAN(4095) when it is configured
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Windows VF driver not issuing required commands to Linux PF driver. [ER0000000106725]
  Defect/Enhancement: Defect
  Problem: Windows VF driver not issuing configure Guest VLAN command to Linux PF driver.
  Change: Set correct operation type and command type in back channel response from Linux PF driver.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - System hung when run internal loopback with FCoE + NIC driver load/unload with NIC + VLAN interfaces up/down.[ER0000000107264]
  Defect/Enhancement: Defect
  Problem: Worker function was initialized after participating in nic idc events which result hung.
  Change: Fix initialization of worker function.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.44.2

  - guest VLAN is not working after VM force off/shut down when guest VLAN configured previously on a VF in Linux environment [ER0000000109004].
  Defect/Enhancement: Defect
  Problem: After shutting down/force off of VM when VLAN configured, user is not able to configure VLAN on next power on of VM
  Change: Clear cached vlan in PF on backchannel termination and PCI FLR so that PF allow it configuring vlan on next power on of VM
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - system paniced while running NIC traffic and ifconfig up/down on helga. [ER0000000108999].
  Defect/Enhancement: Defect
  Problem: system paniced while freeing Tx frag which was never mapped
  Change: fixed the index which will free only mapped Tx frag
  Introduced: Day one
  Impact: HW: All supported Hardware.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - ethtool shows wrong values for link modes. [ER0000000108988]
  Defect/Enhancement: Defect
  Problem: ethtool <ethX> shows incorrect values for link mode.
  Change: fixed the values assigned for the link modes.
  Introduced: 5.2.43
  Impact: HW: 83xx Series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - System(Rhel6.4 KVM) Crashes as soon as issuing " ip link set p3p1 vf 0 mac 00:00:01:01:01:01" command w/o enabling SRIOV.[ER0000000107929].
  Defect/Enhancement: Defect
  Problem: System crashes as soon as issuing "ip link set p3p1 vf 0 mac 00:00:01:01:01:01" command w/o enabling SRIOV.
  Change: Access SR-IOV specific data structure only after SR-IOV PF check in that function (for changing VF's mac)
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - P3P-SLES11SP3: qlcnic throws Call traces while updating QME8262 Flash image. [ER0000000108857]
  Defect/Enhancement: Defect
  Problem: Driver was using wrong method to access a register which caused call traces.
  Change: Used proper method to access register
  Introduced: 5.1.38
  Impact: HW: All supported Hardware.
  OS: RHEL5.X, SLES11SP2, SLES11SP3
  FW: N/A
  OtherSW: N/A

  Version 5.2.44.1

  - Ping failure seen with unload/load of driver. [ER0000000107609]
  Defect/Enhancement: Defect
  Problem: ping failure seen with unload/load of driver with traffic.
  Change: Fixed bug in device open routine which was preventing NAPI poll
  function from re-enabling the interrupt.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - VM hangs as soon as qlcnic driver is loaded. [ER0000000108780]
  Defect/Enhancement: Defect
  Problem: VM panics as soon as qlcnic driver is loaded.
  Change: Checked if set_mac_filter_count function pointer is not NULL before
  calling it.
  Introduced: 5.2.44
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.44

  - SLES11SP2: dmesg says mask set to 0xf when ql_dump.sh sets it to
  mask to 0xff [ER0000000108287]
  Defect/Enhancement: Defect
  Problem: On SLES11 SP2, when driver changes the dump capture mask debug print
  shows older mask.
  Change: Fixed the code where driver was reading older capture mask
  while printing the message.
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: SLES1SP2
  FW: N/A
  OtherSW: N/A

  - SRIOVP - VM with VF added fails to power off after Hibernate.[ER0000000106875]
  Defect/Enhancement: Defect
  Problem: VM with VF added fails to poweroff after Hibernate
  Change: Added suspend and resume support for 83XX adapters
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Add support of set driver version for 83xx. [ER0000000106484]
  Defect/Enhancement: Enhancement
  Problem: Add support to notify driver version to the FW during driver load
  and after reset recovery.
  Change: Added support to set driver version
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Add support for Hilda Minidump RDMEM entry. [ER0000000098736]
  Defect/Enhancement: Enhancement
  Problem: Older method to collect memory dump takes long time.
  Change: Added support to collect memory dump using PEX DMA method.
  Introduced: Day one
  Impact: HW: 83xx series adapters.
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Add support for unicast mac address in fdb handler.[ER0000000105099]
  Defect/Enhancement: Enhancement
  Problem: It will put device into promiscuous mode.
  Change: Add support for configuring secondary unicast address which will use
  existing HW filters to store all the unicast MAC.
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: Rhel6, SLES 11SP2 and SLES 11SP3 Linux flavors
  FW: N/A
  OtherSW: N/A

  - reducing the granularity of sleep in loopback. [ER0000000107435]
  Defect/Enhancement: Enhancement
  Problem: During loopback test it was sleeping for longer time.
  Change: Minimize sleep duration within loopback diagnostic test.
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: Rhel5, Rhel6, Citrix XS6.1 and Citrix XS6.2 Linux flavors
  FW: N/A
  OtherSW: N/A

  - Driver is calling msleep() while in atomic context [ER0000000108628]
  Defect/Enhancement: Defect
  Problem: Driver is calling msleep while in atomic context which
  leads to kernel traces
  Change: Changed msleep call to mdelay
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Upstream driver: create a patch to check return value of
  qlcnic_alloc_mbx_args()[ER0000000106678]
  Problem: Potential invalid memory access if qlcnic_alloc_mbx_args() fails.
  Change: Added checks for qlcnic_alloc_mbx_args() failure to avoid any invalid
  memory access.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - driver should unlock when returning from error path [ER0000000108148]
  Defect/Enhancement: Defect
  Problem: Possible lock contention during error path for max_rss update.
  Change: Release lock when driver is returning from error path to change max_rss value.
  Introduced: 5.1.38
  Impact: HW: All supported Hardware
  OS: Rhel5, Rhel6, Citrix XS6.1 and Citrix XS6.2 Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.2.43

  - Add support for 83xx SR-IOV

  - Transmit timeout and mailbox 0x8 failed [ER0000000100899]
  Defect/Enhancement: Defect
  Problem: Tx timeout and firmware reset seen when running traffic and
  changing stateless offload settings
  Change: When driver receives a packet with gso size > 0 and when TSO is
  disabled, it should be transmitted as a TSO packet to prevent
  Tx timeout and subsequent firmware reset.
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - SR-IOV/Hilda: RHEL63 KVM: RHEL5.9 installed as guest panics while bringing
  up VF qlcnic interface [ER0000000107539]
  Problem: Stack trace seen when interface is brought up after driver load.
  Change: Fixed finding free entry from async_list.
  Introduced: Day one
  Impact: HW: All supported 83xx adapters
  OS: Rhel5 and Sles10 Linux flavors
  FW: N/A

  - SRIOV: On rhel5 VM: NULL pointer dereference on interface up
  [ER0000000108156]
  Problem: Stack trace seen when interface is brought up after driver load.
  Change: Fixed poll routine for SRIOV VF.
  Introduced: Day one
  Impact: HW: All supported 83xx adapters
  OS: Rhel5 Linux flavor
  FW: N/A

  Version 5.1.38

  - Add support for 83xx Series

  - Sleeping function called from invalid context [ER0000000099242]
  Defect/Enhancement: Defect
  Problem: Stack trace seen when bridge interface is configured
  after load/unload
  Change: Fixed a bug in the driver which was using GFP_KERNEL flag which may
  sleep in atomic context. Replaced GFP_KERNEL with GFP_ATOMIC
  flag which doesn't sleep.
  Introduced: Day one
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - LED beaconing can't be set for port 1 [ER0000000100728]
  Defect/Enhancement: Defect
  Problem: Driver does not enable LED beaconing for port 1
  Changes: Fixed a bug in the driver to program port number value for
  config LED command.
  Introduced: Day One
  Impact: HW: All supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Mixed mode interrupts related changes [ER0000000098696]
  Defect/Enhancement: Defect
  Problem: Co-existence of MSI-X/MSI and INTx interrupts among multiple
  functions on an adapter is not supported.
  Change: If an adapter function can't get MSI-X/MSI interrupts and gets
  into INTx mode, fail driver load on that function, as the previous
  functions may have been loaded in MSI-X/MSI mode.
  Introduced: Day one
  Impact: HW: All supported hardware
  OS: All supported linux flavors
  FW: N/A
  OtherSW: N/A

  - Add support for RSS in Linux qlcnic driver for TCP over IPv6.
  [ER0000000090801]
  Defect/Enhancement: Enhancement
  Problem: Receive Side Scaling (RSS) was not working for TCP over IPv6
  Change: Added support in driver to enable RSS on TCP over IPv6
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RHEL6.0:P3P: LRO frames do not increment over IPv6 traffic
  with qlcnic 5.0.26 / 4.9.71 [ER0000000090674]
  Defect/Enhancement: Enhancement
  Problem: LRO was not working for TCP over IPv6.
  Change: Added support in driver to enable LRO on TCP over IPv6 in hardware.
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - RedHat Bug 848291 - [HP BCS 7.0 bug]qlcnic reports lots of
  call trace during reboot [ER0000000098409]
  Defect/Enhancement : Defect
  Problem: Thread/process going to sleep while holding a spinlock
  Change: Change msleep() to mdelay() which doesn’t cause the thread/process
  to sleep.
  Introduced: Day one
  Impact: HW: All supported hardware
  OS: All supported linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.0.29.5 (HP NCDE 10.80)

  - Not able to enable LRO using ethtool on RHEL6.4 GA [ER0000000105842]
  Defect/Enhancement: Defect
  Problem : On RHEL6.4, user can not enable/disable LRO through ethtool
  Change : Fixed a bug in the driver which was preventing LRO settings
  through 'ethtool -K ethX lro {on|off}' option in RHEL6.4
  Introduced : Day one
  Impact : HW: All supported Hardware
  OS: RHEL6.4
  FW: N/A
  OtherSW: N/A

  Version 5.0.29.4

  - Added sysfs interface to tune max rss for sles11sp2.[ER0000000100057]

  Defect/Enhancement: Enhancement
  Problem: There is no way to tune max_rss on sles11sp2 kernel
  Change: Added sysfs interface max_rss to configure rss
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: sles11sp2
  FW: N/A
  OtherSW: N/A

  Version 5.0.29.3 (HP NCDE 10.70)

  - External loopback test pass without any cable plugged.[ER0000000097412]

  Defect/Enhancement: Defect
  Problem: External loopback test pass without any cable plugged
  Change: Sysfs interface for external loopback has been modified
  to return failure status when no cable present
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: SLES11 SP2
  FW: N/A
  OtherSW: N/A

  Version 5.0.29.2

  - OCBB: set driver version in firmware [ER0000000096369]

  Defect/Enhancement: Enhancement
  Problem: AvSecure does not display driver version
  Change: Added support for a new CDRP command to provide driver version
  string to firmware
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  Version 5.0.29.1

  - Added ethtool support in ql_dump.sh [ER0000000090277]

  Defect/Enhancement: Enhancement
  Problem: On newer distributions those are upstream kernel based
  have ethtool user interface for the minidump operations.
  so we have to add ethtool support in ql_dump.sh tool
  Change: Added ethtool interface support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A


  - Added storage driver support in ql_dump.sh [ER0000000090278]

  Defect/Enhancement: Enhancement
  Problem: ql_dump do not have minidump operations support for storage drivers
  Change: Added storage drivers support in ql_dump.sh for minidump
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.0.29

  - Fixed inband vlan tx path issue. [ER0000000093690].

  Defect/Enhancement: Defect
  Problem: If a vlan is inband in a packet then driver use to calculate
  incorrect protocol which lead to checksum errors in firmware.
  Change: Fixed the protocol calculation in case of inband vlan.
  Introduced: Day one
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  - Fixed unsupported CDRP command error message. [ER0000000092873].

  Defect/Enhancement: Defect
  Problem: Invalid error messages seen in dmesg while running ethtool stats.
  Change: Fixed unsupported CDRP command error message.
  Introduced: 5.0.28
  Impact: HW: All Supported Hardware
  OS: All supported Linux flavors
  FW: N/A
  OtherSW: N/A

  Version 5.0.28.1 (HP NCDE 10.65)

  - https://bugzilla.redhat.com/show_bug.cgi?id=786403 [ER0000000089997]


  Version 5.0.28

  - P3P: changing the firmware dump mask in qlcnic driver [ER0000000090816]
  - The ethtool -S command doesn't include any CRC error fields [ER0000000090655]
  - Support for ql_dump.sh to configure and extract minidump [ER0000000092362]


  Version 5.0.27.1

  - P3P Flash Update enhancements [ER0000000091299]


  Version 5.0.27

  - SLES11SP1:qlcnic 5.0.26: LRO fails to increment after context
  reset [ER0000000090625]


  Version 5.0.26.1: (HP NCDE 10.60)

  - qlcnic_dump.sh display o/p when qlcnic is not loaded
  [ER0000000090678]
  - Force dump via qlcnic_dump.sh does not complete when
  qlcnic_udev.sh is in action [ER0000000090710]
  - qlcnic_dump.sh (5.0.26) issues. [ER0000000090589]
  - qlcnic_dump.sh (5.0.26) / qlcnic_udev.sh collected
  dump format [ER0000000090677]
  - qlcnic_dump.sh -l ALL fails [ER0000000090708]
  - Add support for UDEV activation in the RPMs [ER0000000090276]
  - qlcnic-src-install.sh script errors + udev support
  [ER0000000090709]


  Version 5.0.26

  - Check bits 8-28 of peg_halt status register for fw abort code.
  [ER0000000090171]
  - Fix API unlock and log fw dump status. [ER0000000090172]
  - Include script to collect fw dump. [ER0000000090242]
  - After executing the rpm installation commands modinfo command
  throws an error message. [ER0000000090131]


  Version 5.0.25.2

  - QXCR1001186322: Incorrect Speed and Duplex values are shown
  for unconnected ports of NC523SFP [ER0000000088836]
  - qlcnic-src-install.sh script does not get executed
  [ER0000000088256]
  - Need updates to the beacon section in the man page
  [ER0000000088124]


  Version 5.0.25.1

  - hp-qlcnic driver fails to build on SLES11SP2 OS [ER0000000088086]
  - QXCR1001174623:hp-qlcnic driver fails to install on RHEL6u2 OS
  [ER0000000087050]
  - qlcnic driver workaround for ER86705 [ER0000000087375]
  - P3P: Minidump retrieved by udev/qlcnic nomenclature
  [ER0000000087568]


  Version 5.0.25

  - Include UDEV scripts for MiniDump [ER0000000087407]
  - Enable MiniDump support by default [ER0000000087405]
  - Updated packages for XS6.0 GA [ER0000000086415]
  - Fix beacon and LED test [ER0000000087403]
  - Update LICENSE file for qlcnic [ER0000000086508]
  - RHEL6: qlcnic reset sequence leading to MIU wedge
  [ER0000000086653]
  - RHEL6: ACK timeout from qla2xxx during FW reset
  [ER0000000086652]
  - Fixes for external loopback [ER0000000086817]


  Version 5.0.24

  - Segmentation fault during module load on 32-bit kernels
  [ER0000000085848]
  - Log an ERROR message on firmware abort [ER0000000085729]


  Version 5.0.23

  - Add beacon test support [ER0000000085775]
  - FW Image region change in CO card [ER0000000083729]
  - CDRP Race in qlcnic [ER0000000082179]
  - RHEL55 : Ext LB on P3P port connected to FCF
  [ER0000000084848]


  Version 5.0.22

  - Fix ethtool link status [ER0000000084181]
  - qlcnic man page does not have adequate information on fw_dump
  sysfs entry point [ER0000000084383]
  - Define an interface to perform reset [ER0000000084406]


  Version 5.0.21

  - Add adapter descriptions [ER0000000080064]


  Version 5.0.20

  - Add support for External loopback [ER0000000081991]


  Version 5.0.19.1

  - Disable MiniDump by default [ER0000000084381]
  - Online flash update failure [ER0000000084186]


  Version 5.0.19

  - Internal loopback support in CNA environment [ER0000000081994]
  - NIC interface status issue [ER0000000082658]
  - XS5.6 : qlcnic5.0.17 : Unload / reload issue [ER0000000083167]


  Version 5.0.18

  - Support for MiniDump [ER0000000083828]
  - Enhancement to SRPM to let it compile on newer distros
  [ER0000000083122]


  Version 5.0.17.4: (HP NCDE 10.45)

  - Added support for RHEL5.7


  Version 5.0.17.1

  - Print a meaningful error message when the RPM build fails
  on an un supported distribution [ER0000000082874]


  Version 5.0.17

  - RHEL6.0 rpm installation instruction give an incorrect path
  [ER0000000081648]
  - Support for GBE port settings [ER0000000079173]
  - Feature Request: QXCR1001113820: Enhance number of RSS rings
  supported [ER0000000080841]
  - RHEL 5.6 BZ 672368 - GFS2 filesystem hang due to networking
  issue [ER0000000080282]


  Version 5.0.16

  - Need pciinfo even when multiple NIC functions are not present
  on a port [ER0000000077100]
  - Mismatch between the spec and driver w.r.t programming interrupt
  coalescing parameters [ER0000000080018]
  - Load from flash should follow FLT method [ER0000000078979]
  - Upstream 2.6.38: while qlcnic load, Could not send configure
  hw lro request [ER0000000080475]
  - Change pci_alloc_consistent to dma_alloc_coherent
  [ER0000000076956]
  - Performance Enhancements and Code Cleanup [ER0000000081483]
  - LRO module parameter on SLES10 should not have write permission
  [ER0000000080211]
  - qlcnic:module param issue [ER0000000079384]


  Version 5.0.15.2: (HP NCDE 10.40)

  - XS5.6FP1: Unified Source RPM v5.0.15.1:auto depmod does not
  happen after binrpm installation [ER0000000079549]
  - qlcnic Unified Source RPM fails on Rhel5.5 PAE [ER0000000079013]
  - Revert changes made by ER0000000079437 [ER0000000079750]


  Version 5.0.15.1

  - debuginfo RPM is not created for RHEL 6.0 [ER0000000079437]


  Version 5.0.15

  - QXCR1001099278: Remove version string from qlcnic spec file.
  [ER0000000079126]
  - Changing module parameter after driver load is not supported
  [ER0000000079045]
  - Fixed an issue with KMP spec compliance in SLES RPMs
  [ER0000000078773]
  - Driver failed to detect updated firmware on flash
  [ER0000000078929]


  Version 5.0.14.1

  - No link up on SLES10 after module load [ER0000000078671]
  - Call trace on SLES10 during module load [ER0000000078613]


  Version 5.0.14

  - qlcnic: Reset pci function unconditionally during probe
  - qlcnic: Fix ocm window register offset calculation
  - qlcnic: fix LED test when interface is down


  Version 5.0.13

  - qlcnic: Updated driver version to 5.0.13
  - qlcnic: LICENSE file for qlcnic
  - qlcnic: validate eswitch config values for PF
  - qlcnic: Disable loopback support
  - qlcnic: avoid using reset_devices as it may become obsolete


  Version 5.0.12

  - qlcnic: Bumped up driver version to 5.0.12
  - qlcnic: lro off message log from set rx checsum
  - qlcnic: Add description for CN1000Q adapter
  - qlcnic: Fix for kdump
  - qlcnic: Allow minimum bandwidth of zero
  - qlcnic: fix panic on load
  - qlcnic: define valid vlan id range
  - qlcnic: reduce rx ring size
  - qlcnic: fix mac learning
  - qlcnic: update ethtool stats


  Version 5.0.11

  - qlcnic: update driver version 5.0.11
  - qlcnic: change all P3 references to P3P
  - qlcnic: fix promiscous mode for VF
  - qlcnic: fix board description
  - qlcnic: remove private LRO flag
  - qlcnic: support quiescent mode
  - qlcnic: driver private workqueue
  - qlcnic: remove dead code
  - qlcnic: set mtu lower limit
  - qlcnic: cleanup port mode setting
  - qlcnic: sparse warning fixes
  - qlcnic: fix vlan TSO on big endian machine
  - qlcnic: fix endianess for lro
  - qlcnic: fix diag register
  - qlcnic: fix eswitch stats
  - qlcnic: fix internal loopback test
  - drivers/net: return operator cleanup
  - qlcnic: dont set skb->truesize
  - qlcnic: dont assume NET_IP_ALIGN is 2


  Version 5.0.10

  - qlcnic: update version 5.0.10
  - qlcnic: remove fw version check
  - qlcnic: vlan lro support
  - qlcnic: vlan gro support
  - qlcnic: support vlan rx accleration


  Version 5.0.9

  - qlcnic: add cksum flag
  - qlcnic: mac vlan learning support
  - qlcnic: support mac learning
  - qlcnic: fix mac override capability
  - qlcnic: fix panic while using eth_hdr
  - qlcnic: fix mac anti spoof policy
  - qlcnic: fix for setting default eswitch config
  - qlcnic: fix mac addr read
  - qlcnic: add api version in reg dump
  - qlcnic: backout firmware initialization update
  - qlcnic: fix poll implementation
  - qlcnic: fix a race in qlcnic_get_stats()
  - qlcnic: PCI ID addition
  - qlcnic: Fix driver load issue in FW hang
  - qlcnic: Fix missing error codes
  - qlcnic: change reg name
  - qlcnic: fix fw recovery for PF
  - qlcnic: support port vlan id
  - qlcnic: eswitch config fixes


  Version 5.0.8

  - qlcnic: update version 5.0.8
  - qlcnic: rom lock recovery
  - qlcnic: firmware initialization update
  - qlcnic: fix endiness in eswitch statistics
  - qlcnic: mark device state as failed
  - qlcnic: fix VF state
  - qlcnic: support anti mac spoofing
  - qlcnic: configure offload setting on eswitch
  - qlcnic: configure port on eswitch
  - qlcnic: replace magic numbers with defines
  - qlcnic: remove unused code
  - qlcnic: fix inconsistent lock state
  - qlcnic: Use available error codes
  - qlcnic: turn off lro when rxcsum is disabled.
  - qlcnic: fix link diag test
  - qlcnic: fix link status message
  - qlcnic: add eswitch statistics support
  - qlcnic: fix for setting function modes
  - qlcnic: device state management fixes for virtual func
  - qlcnic: fix aer for virtual func
  - qlcnic: using too much stack
  - qlcnic: clean up qlcnic_init_pci_info()
  - qlcnic: fix diag resource allocation
  - qlcnic: fix loopback test
  - qlcnic: fix bandwidth check
  - qlcnic: fix pci resource leak


  Version 5.0.7

  - qlcnic: restore config data after recovery
  - qlcnic: aer support
  - qlcnic: fix netdev notifier in error path
  - qlcnic: disable tx timeout recovery
  - qlcnic: fix pause params setting
  - qlcnic: Disable admin tools interface for VF driver
  - qlcnic: Check FW capability for TSO
  - netdev: Make ethtool_ops::set_flags() return -EINVAL
  - qlcnic: Add support for configuring eswitch
  - qlcnic: Remove obsolete code
  - qlcnic: fail when try to setup unsupported features


  Version 5.0.6

  - qlcnic: update version to 5.0.6
  - qlcnic: mark context state freed after destroy
  - qlcnic: offload tx timeout recovery
  - qlcnic: dont free host resources during fw recovery
  - qlcnic: release device resources during interface down
  - qlcnic: fix mac address mgmt
  - qlcnic: handshake with card after fw load
  - qlcnic: cleanup skb allocation
  - qlcnic: fix register access
  - qlcnic: fix race in tx stop queue


  Version 5.0.5

  - qlcnic: seperate interrupt for TX
  - qlcnic: fix mac addr print
  - qlcnic: change driver description
  - qlcnic: fix device soft reset


  Version 5.0.4

  - qlcnic: Bumped up version number
  - qlcnic: Fix a bug in eswitch detection


  Version 5.0.3

  - qlcnic: Fix Compilation Issue when CONFIG_INET was ...
  - qlcnic: Add non privileged mode ...
  - qlcnic: Add management and privileged modes ...


  Version 5.0.2

  - qlcnic: mark device state fail
  - qlcnic: remove unused register
  - qlcnic: fix internal loopback test
  - qlcnic: module param for firmware load option
  - qlcnic: fix rx bytes statistics
  - qlcnic: change adapter name display
  - qlcnic: fix memory leaks
  - qlcnic: add idc debug registers
  - qlcnic: support quisce mode
  - qlcnic: check device class
  - qlcnic: check IDC version
  - qlcnic: cleanup unused code
  - qlcnic: cleanup dma mask setting
  - qlcnic: fix caching window register
  - qlcnic: remove obsolete register
  - qlcnic: fix context cleanup
  - drivers/net: Remove unnecessary returns from void funct ...
  - qlcnic: update version 5.0.2
  - qlcnic: protect resource access
  - qlcnic: fix rcv buffer leak
  - qlcnic: fix pci semaphore checks
  - qlcnic: define macro for driver state
  - qlcnic: fix fw initialization responsibility
  - qlcnic: fix defines as per IDC document
  - qlcnic: additional driver statistics
  - qlcnic: fix set mac addr


  Version 5.0.1

  - qlcnic: update version to 5.0.1
  - qlcnic: fix endianness in fw validation
  - qlcnic: fix interface attach sequence
  - qlcnic: add driver debug support
  - qlcnic: use IDC defined timeout value
  - qlcnic: fix onchip memory access
  - qlcnic: update oncard memory size check
  - qlcnic: handle queue manager access
  - qlcnic: fix fw load from file
  - qlcnic: remove extra space from board names
  - qlcnic: fix bios version check
  - qlcnic: validate unified fw image
  - qlcnic: fix multicast handling
  - qlcnic: additional driver statistics.
  - qlcnic: fix tx csum status
  - net: convert multiple drivers to use netdev_for_each ...
  - net: use netdev_mc_count and netdev_mc_empty when appro ...
  - qlcnic: add loopback diagnostic test
  - qlcnic: add interrupt diagnostic test
  - qlcnic: support LED blink for device identification
  - qlcnic: protect resoruce cleanup by rtnl lock
  - qlcnic: clear device reset state after fw recovery
  - qlcnic: add ethernet identifier in board info
  - qlcnic: use DEFINE_PCI_DEVICE_TABLE


  Version 5.0.0

  - qlcnic: Initial version of "qlcnic" driver


author: Linux Storage Driver Team <iss_storagedev@hp.com> 1.2.10-120
changelog:
  - Added Red Hat Enterprise Linux 7
   - Added Secure Boot support for Red Hat Enterprise Linux 7 and SUSE
     Enterprise Linux 11 SP3.


author: Broadcom Build Environment
changelog:
  -Added Linux SRIOV support
  -Added iSCSI & FCoE HBA support for specific HP adapters and devices
  -Added VC4.10 support
  -Added BCV support
  -When GRO setting changes while LRO is enabled, don't reload as LRO takes precedence.
  -Allow UDP tunneling offload
  -Enable IPGRE RSS by default
  -Support different GRE RSS modes.
  -Fixed bnx2x crash while reboot after SLES 11SP2 BFS installation (68472)


author: Broadcom Build Environment
changelog:
  -Add RH5.10 support. 
  -Add RH6.5 support. 
  -FC-TAPE - Host responds early to a requested resend delay - Linux (70101)
  -SLES11 MEZ75 IO halt with Nexus reboot tests (70728)
  -SLES 11 blade loses all targets from BLOM port during fabric uplink add/remove (70187)
  -KVM gso and gro are not working on hv and vm as expected (70506)
  -SRIOV mtu toggle failure (70530)
  -SRIOV hv reboots on pf toggle with vfs passed through on it. (70531)
  -Guest OS dosent boot after attaching VF in RHEL6.3x64bit for 57840 device. (68426)
  -[NET]SUT reboot&MCE report when create 30th/31st VF on 57810 device on SLES11 SP2. (69263)
  -RH Cert - RH5 | U8 | v7-1.5-33 | 57810 | Flex Network Test failed. (70427)
  -BACS 16.2.0: Show ETS/Priority Tagging/PFC as operational when DCBX is disabled on the switch side. (69690)
  -Incorrect port value is displayed for connected/unconnected ports of 57810 for RHEL5.9 64bits. (68627)
  -VFs are not getting created for Broadcom adapters in RHEL5.10 OS. (71456)


