Enabled operation with third party external RAID enclosures.

Improved device reset recovery behavior.

Added Red Hat Enterprise Linux 7 Server Update 2 support.

]]> Fixes the problems when installing with multipath enabled.

]]>

Added Red Hat Enterprise Linux 7 Server Update 2 support.

]]> Fixes the below issue:

When issuing the "shutdown -h now" command at the Linux prompt, the server begins shutting down, but instead of halting and powering off, the server resets itself and boots back up.

]]>

Improvements to the driver init error handling.

Better error handling for CD/DVD devices.

Added Red Hat Enterprise Linux 7 Server Update 2 support.

]]> Increase limit for reporting overheated drive temperature.

]]> Fixes the issue where Port and Box # were not being reported correctly to certain applications.

]]> Added Red Hat Enterprise Linux 7 Server Update 2 support.

]]> Added support for Red Hat Enterprise Linux 7 Update 1.

]]>

Updated driver to version 8.07.00.28.07.0-k

Enabled T10 DIF

]]> Maintenance updates to driver including:

Check if the INQ response buffer is > 170 (instead of >=)
Fix for invalid offset reference of inquiry response data
Hande INQ data changed check condition
Fix for the scsi status getting overwritten
Fix to avoid crossing initiator/target mode during AEN handling

]]>

Updated driver to version 8.07.00.28.07.0-k

Enabled T10 DIF

]]> Maintenance updates to driver including:

Check if the INQ response buffer is > 170 (instead of >=)
Fix for invalid offset reference of inquiry response data
Hande INQ data changed check condition
Fix for the scsi status getting overwritten
Fix to avoid crossing initiator/target mode during AEN handling

]]> Updated the kit to version 5.0.0.0-3

]]> ]]> ]]>

Added support for new HP ProLiant Gen9 Servers.

]]> Fixed following issues:

Send correct CDB for SSD drives.
Correct speed shown for unconfigured NIC port.
Return values for logical NIC interfaces which does not support speed entries in sysfs.

]]> Added support for new HP ProLiant Gen9 Servers.

Logging of Kernel Module change has been made dynamic to AHS.

Added support for the following network adapters:

HP Ethernet 10Gb 2-port 562SFLR-SFP+ Adapter
HP Ethernet 10Gb 2-port 562SFP+ Adapter
HP FlexFabric 20G 2-port 631M Adapter

]]>

Added support for new HP ProLiant Gen9 Servers.

Added support for Systemd.

]]> Fixed following issue:

Initital Program Load(IPL) devices are displayed correctly after disabling NICs.

]]> Added support for new HP ProLiant Gen9 Servers.

]]> Fixed following issue:

Threshold Temperature will not be displayed for Not Installed Sensors

]]>

Added support for new HP ProLiant Gen9 Servers.

Support for Systemd.

Init scripts are LSB compliant.

]]> Fixed following issues:

After plugging or unplugging a NIC cable, the cmanicd daemon status was inactive.
When running in non-interactive mode, the snmpd.conf file could not be updated with SNMP settings.
After running agents, the NFS directory could not be unmounted.

]]>

Added support for new HP ProLiant Gen9 Servers.

Support for Systemd.

Init scripts are LSB compliant.

]]> Fixed following issues:

cmanicd daemon status will not dead after plug/unplug NIC cable.
Able to update snmpd.conf file with SNMP settings in non-interactive mode.
Can unmount NFS directory after running agents.

]]>

Added support for new HP ProLiant Gen9 Servers.

]]> Fixed following issue:

SMH shows statistics with IB adapter.

]]> Japanese localization error in Insight agents pages

]]> Updated the following components

OpenSSL to version OpenSSL-1.0.2d
PHP to version php-5.6.11
Curl to version cul -7.42.1

]]> Improved security features

]]> Updated HP EULA for encryption licensing

]]> 为加密授权而更新惠普最终用户许可协议

]]> Support for:

Smart Array P840ar

New Features:

Transformation support for H-series controllers
- Includes plaintext and rekey operations for Encryption
NVMe drive support for discovery and Wear Gauge information
New Solid State device view

]]> 支持：

Smart Array P840ar

新特性：

转换支持H系列控制器
- 包括用于加密的明文和rekey操作
NVMe驱动器支持发现和磨损量规信息
新固态设备查看

]]> Updated HP EULA for encryption licensing

]]> Support for:

Smart Array P840ar

New Features:

Transformation support for H-series controllers
- Includes plaintext and rekey operations for Encryption
NVMe drive support for discovery and Wear Gauge information
New Solid State device view
Ability to clear primary and/or secondary boot volumes
Additional Encryption password capabilities
- Supports –configfile command to read key=value pairs from an ASCI text file
- The key is password i.e. password=[value]

]]> HPONCFG displays an appropriate error message with -w option when LOCK_CONFIGURATION is enabled.

]]>

HPONCFG RPM is now signed by HP.

New command line argument –b or --reboot introduced in HPONCFG to reboot iLO without changing any configuration.

]]>

Sustaining and new support for HP ProLiant Gen 9 servers.

Discover HP Express Bay Switch Card.

Discover backplane connected to HP Express Switch Card.

See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.

]]>

Contains fixes to support HP ProLiant Gen9 servers.

Incorrect Japanese translation in Exit DIagnostics button.

Untranslated SMBIOS strings in Survey and Test tabs.

Added error message when unable to retrieve power supply serial number, spare part number and firmware version.

Missing information in Compare Configurations -> View Comparison Results.

Untranslated strings in Help -> Test Component tab storage section.

Software -> HP Software section in iLO web interface was missing hpdiags in the list.

]]> See the HP Service Pack for ProLiant Release Notes for more information.

See the HP Service Pack for ProLiant Server Support Guide for information on supported servers.

]]>