# Makefile.in generated by automake 1.11.1 from Makefile.am.
# doc/sphinx/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# Makefile for Sphinx documentation
#

pkgdatadir = $(datadir)/varnish
pkgincludedir = $(includedir)/varnish
pkglibdir = $(libdir)/varnish
pkglibexecdir = $(libexecdir)/varnish
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-redhat-linux-gnu
host_triplet = x86_64-redhat-linux-gnu
target_triplet = x86_64-redhat-linux-gnu
subdir = doc/sphinx
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run aclocal-1.11
AMTAR = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run automake-1.11
AWK = gawk
CC = gcc -std=gnu99
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic
CPP = gcc -E
CPPFLAGS = 
CURSES_LIBS = -lcurses 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DL_LIBS = -ldl 
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JEMALLOC_LDADD = -ljemalloc
LD = /usr/bin/ld -m elf_x86_64
LDFLAGS = 
LIBM = -lm
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBUMEM = 
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
NET_LIBS = -lnsl 
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = varnish
PACKAGE_BUGREPORT = varnish-dev@varnish-cache.org
PACKAGE_NAME = Varnish
PACKAGE_STRING = Varnish 2.1.5
PACKAGE_TARNAME = varnish
PACKAGE_VERSION = 2.1.5
PATH_SEPARATOR = :
PCRE_CFLAGS =  
PCRE_CONFIG = 
PCRE_LIBS = -lpcre  
PKG_CONFIG = /usr/bin/pkg-config
PTHREAD_LIBS = -lpthread 
RANLIB = ranlib
RST2MAN = no
RT_LIBS = -lrt 
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TCLSH = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/missing --run tclsh
VARNISH_STATE_DIR = ${localstatedir}/varnish
VCC_CC = exec cc -fpic -shared -Wl,-x -o %o %s
VERSION = 2.1.5
XSLTPROC = xsltproc
abs_builddir = /builddir/build/BUILD/varnish-2.1.5/doc/sphinx
abs_srcdir = /builddir/build/BUILD/varnish-2.1.5/doc/sphinx
abs_top_builddir = /builddir/build/BUILD/varnish-2.1.5
abs_top_srcdir = /builddir/build/BUILD/varnish-2.1.5
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build = x86_64-redhat-linux-gnu
build_alias = x86_64-redhat-linux-gnu
build_cpu = x86_64
build_os = linux-gnu
build_vendor = redhat
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = x86_64-redhat-linux-gnu
host_alias = x86_64-redhat-linux-gnu
host_cpu = x86_64
host_os = linux-gnu
host_vendor = redhat
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} /builddir/build/BUILD/varnish-2.1.5/install-sh
libdir = /usr/lib64
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var/lib
lt_ECHO = echo
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s&^&&
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /var/lib
srcdir = .
sysconfdir = /etc
target = x86_64-redhat-linux-gnu
target_alias = x86_64-redhat-linux-gnu
target_cpu = x86_64
target_os = linux-gnu
target_vendor = redhat
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
varnishconfdir = ${sysconfdir}/varnish

# You can set these variables from the command line.
SPHINXOPTS = 
SPHINXBUILD = sphinx-build
PAPER = 
BUILDDIR = =build

# Internal variables.
PAPEROPT_a4 = -D latex_paper_size=a4
PAPEROPT_letter = -D latex_paper_size=letter
ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) $(srcdir)
EXTRA_DIST = \
	conf.py \
	index.rst \
	faq/configuration.rst \
	faq/general.rst \
	faq/http.rst \
	faq/index.rst \
	faq/logging.rst \
	glossary/index.rst \
	installation/bugs.rst \
	installation/help.rst \
	installation/index.rst \
	installation/install.rst \
	installation/prerequisites.rst \
	phk/autocrap.rst \
	phk/barriers.rst \
	phk/index.rst \
	phk/ipv6suckage.rst \
	phk/platforms.rst \
	phk/sphinx.rst \
	phk/thoughts.rst \
	reference/index.rst \
	reference/varnishadm.rst \
	reference/varnishd.rst \
	reference/varnishhist.rst \
	reference/varnishlog.rst \
	reference/varnishncsa.rst \
	reference/varnishreplay.rst \
	reference/varnishsizes.rst \
	reference/varnishstat.rst \
	reference/varnishtest.rst \
	reference/varnishtop.rst \
	reference/vcl.rst \
	tutorial/advanced_backend_servers.rst \
	tutorial/advanced_topics.rst \
	tutorial/backend_servers.rst \
	tutorial/handling_misbehaving_servers.rst \
	tutorial/increasing_your_hitrate.rst \
	tutorial/index.rst \
	tutorial/logging.rst \
	tutorial/putting_varnish_on_port_80.rst \
	tutorial/sizing_your_cache.rst \
	tutorial/starting_varnish.rst \
	tutorial/statistics.rst \
	tutorial/troubleshooting.rst \
	tutorial/vcl.rst

all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/sphinx/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/sphinx/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-local

dvi: dvi-am

dvi-am:

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	dist-hook distclean distclean-generic distclean-libtool \
	distclean-local distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am


.PHONY: help clean html dirhtml pickle json htmlhelp qthelp latex changes linkcheck doctest

help:
	@echo "Please use \`make <target>' where <target> is one of"
	@echo "  html      to make standalone HTML files"
	@echo "  dirhtml   to make HTML files named index.html in directories"
	@echo "  pickle    to make pickle files"
	@echo "  json      to make JSON files"
	@echo "  htmlhelp  to make HTML files and a HTML help project"
	@echo "  qthelp    to make HTML files and a qthelp project"
	@echo "  latex     to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
	@echo "  changes   to make an overview of all changed/added/deprecated items"
	@echo "  linkcheck to check all external links for integrity"
	@echo "  doctest   to run all doctests embedded in the documentation (if enabled)"

clean:
	-rm -rf $(BUILDDIR)/*

html:
	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
	@echo
	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."

dirhtml:
	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
	@echo
	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."

pickle:
	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
	@echo
	@echo "Build finished; now you can process the pickle files."

json:
	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
	@echo
	@echo "Build finished; now you can process the JSON files."

htmlhelp:
	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
	@echo
	@echo "Build finished; now you can run HTML Help Workshop with the" \
	      ".hhp project file in $(BUILDDIR)/htmlhelp."

qthelp:
	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
	@echo
	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/Varnish.qhcp"
	@echo "To view the help file:"
	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/Varnish.qhc"

latex:
	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
	@echo
	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
	@echo "Run \`make all-pdf' or \`make all-ps' in that directory to" \
	      "run these through (pdf)latex."

changes:
	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
	@echo
	@echo "The overview file is in $(BUILDDIR)/changes."

linkcheck:
	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
	@echo
	@echo "Link check complete; look for any errors in the above output " \
	      "or in $(BUILDDIR)/linkcheck/output.txt."

doctest:
	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
	@echo "Testing of doctests in the sources finished, look at the " \
	      "results in $(BUILDDIR)/doctest/output.txt."

dist-hook:
	$(MAKE) html
	cp -r $(BUILDDIR) $(distdir)

distclean-local:
	rm -rf $(BUILDDIR)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
