# Makefile.in generated by automake 1.10.1 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.




pkgdatadir = $(datadir)/yaz
pkglibdir = $(libdir)/yaz
pkgincludedir = $(includedir)/yaz
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = powerpc64-redhat-linux-gnu
host_triplet = powerpc64-redhat-linux-gnu
subdir = doc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/local.ent.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_icu.m4 \
	$(top_srcdir)/m4/acx_pthread.m4 $(top_srcdir)/m4/yaz.m4 \
	$(top_srcdir)/m4/yaz_libxml2.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES = local.ent
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
man1dir = $(mandir)/man1
am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" \
	"$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)"
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
NROFF = nroff
MANS = $(man_MANS)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(doc_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /builddir/build/BUILD/yaz-3.0.34/config/missing --run aclocal-1.10
AMTAR = ${SHELL} /builddir/build/BUILD/yaz-3.0.34/config/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /builddir/build/BUILD/yaz-3.0.34/config/missing --run autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/yaz-3.0.34/config/missing --run autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/yaz-3.0.34/config/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mminimal-toc
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mminimal-toc
CYGPATH_W = echo
DEFS = -DPACKAGE_NAME=\"yaz\" -DPACKAGE_TARNAME=\"yaz\" -DPACKAGE_VERSION=\"3.0.34\" -DPACKAGE_STRING=\"yaz\ 3.0.34\" -DPACKAGE_BUGREPORT=\"yaz-help@indexdata.dk\" -DPACKAGE=\"yaz\" -DVERSION=\"3.0.34\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1 -DHAVE_DIRENT_H=1 -DHAVE_FNMATCH_H=1 -DHAVE_WCHAR_H=1 -DHAVE_LOCALE_H=1 -DHAVE_LANGINFO_H=1 -DHAVE_PWD_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_SELECT_H=1 -DHAVE_SYS_SOCKET_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_TIMES_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_UN_H=1 -DHAVE_SYS_WAIT_H=1 -DHAVE_NETDB_H=1 -DHAVE_ARPA_INET_H=1 -DHAVE_NETINET_TCP_H=1 -DHAVE_NETINET_IN_SYSTM_H=1 -DHAVE_NET_IF_H=1 -DHAVE_NETINET_IN_H=1 -DHAVE_NETINET_IF_ETHER_H=1 -DSTDC_HEADERS=1 -DHAVE_LONG_LONG=1 -DHAVE_READLINE_READLINE_H=1 -DHAVE_READLINE_HISTORY_H=1 -DHAVE_READLINE_COMPLETION_OVER=1 -DHAVE_READLINE_RL_COMPLETION_MATCHES=1 -DHAVE_ICONV_H=1 -DHAVE_GETADDRINFO=1 -DHAVE_VSNPRINTF=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_POLL=1 -DHAVE_STRERROR_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_USLEEP=1 -DHAVE_FOPEN64=1 -DHAVE_SYS_POLL_H=1 -DYAZ_SOCKLEN_T=socklen_t -DYAZ_USE_NEW_LOG=1 -DHAVE_TCPD_H=1 -DYAZ_HAVE_XML2=1 -DYAZ_HAVE_XSLT=1 -DYAZ_HAVE_EXSLT=1 -DHAVE_XSLTSAVERESULTTOSTRING=1
DEPDIR = .deps
DSSSL_DIR = 
DSYMUTIL = 
DTD_DIR = 
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
F77 = 
FFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mminimal-toc -I/usr/lib64/gfortran/modules
GREP = /bin/grep
HTML_COMPILE = $(XSLTPROC_COMPILE) $(srcdir)/common/id.htmlhelp.xsl
ICU_CFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mminimal-toc $(THREADSCFLAGS)
ICU_CONFIG = /usr/bin/icu-config
ICU_CPPFLAGS = -D_REENTRANT -D_REENTRANT -I/usr/include -D YAZ_HAVE_ICU=1
ICU_CXXFLAGS = -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mminimal-toc
ICU_LIBS = -licui18n -licuuc -licudata -lpthread -lm  
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LDFLAGS = 
LIBOBJS = 
LIBS = -lexslt -lxslt -lz -lm -lgcrypt -lgpg-error -lxml2    -lwrap
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAKEINFO = ${SHELL} /builddir/build/BUILD/yaz-3.0.34/config/missing --run makeinfo
MAN_COMPILE = $(XSLTPROC_COMPILE) $(srcdir)/common/id.man.xsl
MKDIR_P = /bin/mkdir -p
NMEDIT = 
OBJEXT = o
PACKAGE = yaz
PACKAGE_BUGREPORT = yaz-help@indexdata.dk
PACKAGE_NAME = yaz
PACKAGE_STRING = yaz 3.0.34
PACKAGE_TARNAME = yaz
PACKAGE_VERSION = 3.0.34
PATH_SEPARATOR = :
PTHREAD_CC = gcc
PTHREAD_CFLAGS = -pthread -DYAZ_POSIX_THREADS=1
PTHREAD_LIBS = -lpthread
RANLIB = ranlib
READLINE_LIBS =  -lreadline -lncurses -lhistory
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
SSL_CFLAGS = 
SSL_LIBS = 
STRIP = strip
TCLSH = tclsh
TKL_COMPILE = $(XSLTPROC_COMPILE) $(srcdir)/common/id.tkl.xsl
VERSION = 3.0.34
XML2_CFLAGS = -I/usr/include/libxml2  
XSLTPROC_COMPILE = xsltproc -path ".:$(srcdir)"
XSL_DIR = 
YACC = 
YAZ_BUILD_ROOT = /builddir/build/BUILD/yaz-3.0.34
YAZ_CONFIG_CFLAGS =  -DYAZ_HAVE_XML2=1 -DYAZ_HAVE_XSLT=1 -DYAZ_HAVE_EXSLT=1 -I/usr/include/libxml2  
YAZ_CONF_CFLAGS = 
YAZ_SRC_ROOT = /builddir/build/BUILD/yaz-3.0.34
abs_builddir = /builddir/build/BUILD/yaz-3.0.34/doc
abs_srcdir = /builddir/build/BUILD/yaz-3.0.34/doc
abs_top_builddir = /builddir/build/BUILD/yaz-3.0.34
abs_top_srcdir = /builddir/build/BUILD/yaz-3.0.34
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = 
acx_pthread_config = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build = powerpc64-redhat-linux-gnu
build_alias = ppc64-redhat-linux-gnu
build_cpu = powerpc64
build_os = linux-gnu
build_vendor = redhat
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = /usr/share/doc/yaz
dvidir = ${docdir}
exec_prefix = /usr
host = powerpc64-redhat-linux-gnu
host_alias = ppc64-redhat-linux-gnu
host_cpu = powerpc64
host_os = linux-gnu
host_vendor = redhat
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = $(SHELL) /builddir/build/BUILD/yaz-3.0.34/config/install-sh
libdir = /usr/lib64
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgconfigpath = /usr/bin/pkg-config
prefix = /usr
program_transform_name = s&^&&
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /usr/com
srcdir = .
sysconfdir = /etc
target_alias = ppc64-redhat-linux-gnu
top_builddir = ..
top_srcdir = ..
SUBDIRS = common
XMLFILES = bookinfo.xml introduction.xml installation.xml \
 indexdata.xml \
 asn.xml tools.xml odr.xml comstack.xml frontend.xml license.xml \
 future.xml zoom.xml credits.xml gfs-options.xml \
 yaz.xml yaz-client-commands.xml soap.xml gfs-virtual.xml gfs-synopsis.xml \
 std-oid-table.xml manref.xml

HTMLFILES = index.html
MANFILES = yaz-client.1 yaz-ztest.8 \
	yaz-config.8 yaz.7 zoomsh.1 yaz-asncomp.1 \
	yaz-marcdump.1 yaz-iconv.1 yaz-log.7 \
	yaz-illclient.1 yaz-icu.1

REFFILES = yaz-client-man.xml yaz-ztest-man.xml yaz-config-man.xml \
	yaz-man.xml zoomsh-man.xml yaz-asncomp-man.xml \
	yaz-marcdump-man.xml yaz-iconv-man.xml yaz-log-man.xml \
	yaz-illclient-man.xml yaz-icu-man.xml

SUPPORTFILES = entities.ent apilayer.obj local.ent.in
doc_DATA = $(HTMLFILES) apilayer.png 
man_MANS = $(MANFILES)
EXTRA_DIST = $(XMLFILES) $(SUPPORTFILES) $(man_MANS) $(REFFILES) \
	$(doc_DATA)

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
local.ent: $(top_builddir)/config.status $(srcdir)/local.ent.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
install-man7: $(man7_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man7dir)" || $(MKDIR_P) "$(DESTDIR)$(man7dir)"
	@list='$(man7_MANS) $(dist_man7_MANS) $(nodist_man7_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.7*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    7*) ;; \
	    *) ext='7' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst"; \
	done
uninstall-man7:
	@$(NORMAL_UNINSTALL)
	@list='$(man7_MANS) $(dist_man7_MANS) $(nodist_man7_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.7*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    7*) ;; \
	    *) ext='7' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man7dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man7dir)/$$inst"; \
	done
install-man8: $(man8_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
	done
uninstall-man8:
	@$(NORMAL_UNINSTALL)
	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.8*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    8*) ;; \
	    *) ext='8' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
	done
install-docDATA: $(doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
	@list='$(doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
	done

uninstall-docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
check-am: all-am
check: check-recursive
all-am: Makefile $(MANS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(docdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-docDATA install-man
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-dvi: install-dvi-recursive

install-exec-am:

install-html: install-html-recursive

install-info: install-info-recursive

install-man: install-man1 install-man7 install-man8

install-pdf: install-pdf-recursive

install-ps: install-ps-recursive

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-docDATA uninstall-man
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook

uninstall-man: uninstall-man1 uninstall-man7 uninstall-man8

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
	install-data-am install-strip uninstall-am

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	ctags ctags-recursive dist-hook distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-hook install-docDATA install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-man1 install-man7 install-man8 install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-am uninstall-docDATA \
	uninstall-hook uninstall-man uninstall-man1 uninstall-man7 \
	uninstall-man8


std-oid-table.xml: $(srcdir)/../src/oid.csv
	$(TCLSH) $(srcdir)/../src/oidtoc.tcl $(srcdir) $(srcdir)/../src/oid.csv std-oid-table.xml

yaz-client.1: $(srcdir)/yaz-client-man.xml $(srcdir)/yaz-client-commands.xml
	$(MAN_COMPILE) $(srcdir)/yaz-client-man.xml

yaz-ztest.8: yaz-ztest-man.xml gfs-options.xml gfs-synopsis.xml gfs-virtual.xml
	$(MAN_COMPILE) $(srcdir)/yaz-ztest-man.xml

yaz-config.8: yaz-config-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-config-man.xml

yaz.7: yaz-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-man.xml

zoomsh.1: zoomsh-man.xml
	$(MAN_COMPILE) $(srcdir)/zoomsh-man.xml

yaz-asncomp.1: yaz-asncomp-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-asncomp-man.xml

yaz-marcdump.1: yaz-marcdump-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-marcdump-man.xml

yaz-iconv.1: yaz-iconv-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-iconv-man.xml

yaz-illclient.1: yaz-illclient-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-illclient-man.xml

yaz-log.7: yaz-log-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-log-man.xml

yaz-icu.1: yaz-icu-man.xml
	$(MAN_COMPILE) $(srcdir)/yaz-icu-man.xml

$(HTMLFILES): $(XMLFILES)
	rm -f *.html
	$(HTML_COMPILE) $(srcdir)/yaz.xml

index.tkl: $(XMLFILES)
	rm -f *.tkl
	$(TKL_COMPILE) $(srcdir)/yaz.xml

yaz.pdf: $(XMLFILES)
	dblatex $(srcdir)/yaz.xml

yazj.pdf:
	jade -E14 -D $(srcdir) -d common/print.dsl -t tex $(srcdir)/common/xml.dcl $(srcdir)/yaz.xml
	rm -f yazj.pdf
	cp yaz.tex yazj.tex
	pdfjadetex yazj.tex
	pdfjadetex yazj.tex >/dev/null
	pdfjadetex yazj.tex >/dev/null

manref.xml: $(REFFILES) $(srcdir)/common/stripref.xsl
	rm -f manref.xml
	for i in $(REFFILES); do \
		xsltproc $(srcdir)/common/stripref.xsl $(srcdir)/$$i | sed 1d >>manref.xml; \
	done

apilayer.png: 
	tgif -print -xbm apilayer.obj
	xbmtopbm <apilayer.xbm|pnmtopng >apilayer.png

dist-hook:
	if test -f index.html; then d=.; else d="$(srcdir)"; fi; \
	for p in $$d/*.html; do \
		cp $$p $(distdir); \
	done

doc-clean:
	rm -f *.html *.[0-9] *.pdf *.tkl

install-data-hook:
	if test -f index.html; then d=.; else d="$(srcdir)"; fi; \
	for p in $$d/*.html; do \
		$(docDATA_INSTALL) $$p $(DESTDIR)$(docdir); \
	done

uninstall-hook:
	rm -r $(DESTDIR)$(docdir)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
